XSONIC Airmar SS60 (0°)

The XSONIC Airmar SS60 (0°) transducer operates on two distinct frequencies: 50 kHz and 200 kHz. These frequencies provide versatile sonar coverage suitable for varying depths and detection types.

The XSONIC Airmar SS60 (0°) transducer has a power output of 600 W.

The XSONIC Airmar SS60 (0°) transducer is designed to provide accurate depth and water temperature readings.

The XSONIC Airmar SS60 (0°) transducer can reach different depths depending on the frequency used:

At 50 kHz, it provides a depth range up to 353 meters (1,200 feet). At 200 kHz, it reaches a maximum depth of 206 meters (700 feet).

The beam angles of the XSONIC Airmar SS60 transducer (0°) vary depending on the frequency:

At 50 kHz, it uses a wide beam of 45°. At 200 kHz, it uses a narrower beam of 12°.

Yes, the XSONIC Airmar SS60 (0°) transducer is equipped with a stainless steel housing, providing excellent corrosion resistance in a marine environment.

No, the XSONIC Airmar SS60 (0°) transducer is not a Chirp model. It uses traditional 50/200 kHz frequencies.

The XSONIC Airmar SS60 (0°) depth sounder is equipped with a black 9-pin connector and a 10-meter (33-foot) cable.

The XSONIC Airmar SS60 (0°) transducer is not factory-coated with antifouling paint. However, Airmar certifies that applying Foulfree antifouling coating on its transducers does not affect performance.

The Foulfree coating, certified by Airmar, is an ultra-smooth, non-toxic and durable surface that prevents marine growth from adhering to the transducer. Once applied, it can protect the surface for up to two years. It is an anti-fouling coating, not a toxic anti-fouling paint.

Thanks to its stainless-steel housing, the XSONIC Airmar SS60 (0°) transducer is compatible with all hull materials, including fiberglass, wood, and metal. For metal hulls, it is recommended to use the supplied isolation ring to prevent electrolytic corrosion.

The XSONIC Airmar SS60 (0°) transducer is a fixed tilted-element model at 0°. It is specifically designed and recommended for hulls with a deadrise angle between 0° and 7° at the installation point.

Yes, the XSONIC Airmar SS60 (0°) transducer is a compatible accessory with Lowrance systems, including sonars and transducers.

For installation of the XSONIC Airmar SS60 (0°) transducer, the following tools and materials are generally required:

Safety glasses, dust mask, and hearing protectionAngle finder or digital levelElectric drill (10 mm or 3/8" chuck or larger)3 mm or 1/8" drill bitHole saw (size specific to hull material)SandpaperMild detergent or low-solvent cleaner (e.g., alcohol)File (for metal hull installation)Marine sealant (suitable for below waterline)Cable tiesWater-based antifouling paint (mandatory in saltwater)

For optimal performance, the transducer must be installed in a location where:

The water flow under the hull is smooth, with minimal bubbles and turbulence.The transducer is continuously submerged in water.The transducer’s beam is not obstructed by the keel or propeller shaft.The location is away from interference sources (propeller, other machinery, other sounders, cables).Specific locations are recommended depending on the boat type (e.g., starboard side for motorboats, forward of the keel for fin-keel sailboats).

Yes, when installing the XSONIC Airmar SS60 (0°) transducer on a metal hull, it is mandatory to use the provided isolation ring. This isolates the stainless steel housing from the metal hull and prevents electrolytic corrosion. Ensure the washer is in full contact with the hull and the nut is firmly tightened.

During installation, the arrow on top of the transducer must point toward the keel or the central axis of the boat. This orientation ensures the internal element of the transducer is aligned with the hull’s drift angle, guaranteeing accurate readings.

Yes, it is mandatory to check immediately for any leaks once the boat is back in the water. Do not leave the boat unattended for more than three hours, as even a small leak can lead to significant water accumulation.

The XSONIC Airmar SS60 (0°) transducer is designed with a stainless steel housing, making it compatible with all hull materials, including fiberglass, wood, and metal. For metal hulls, an isolation sleeve is provided to prevent electrolytic corrosion.

Regarding hull deadrise angle, this model features a fixed 0° tilted element. It is specifically suited for hulls with a deadrise angle between 0° and 7° at the mounting point. The Tilted Element™ technology allows the sonar beam to be directed straight to the bottom for accurate readings, even with hull tilt.