Stabilisateur DC-DC Rebelcell OM1212100WL 12 V 9 A, boîtier à ailettes avec câble XT60 et connecteur de sortie

Stabilisateur Rebelcell 12 V 9 A modèle 2025, vue d’ensemble

Stabilisateur Rebelcell 12 V 9 A modèle 2025, vue arrière

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Rebelcell

OM1212100WL

Rebelcell 12V / 9A DC Stabilizer for Electronics (2025)

Name: Rebelcell 12V / 9A DC Stabilizer for Electronics (2025)
Brand: Rebelcell
SKU: OM1212100WL
Price: 66.02 EUR
Availability: InStock

Rebelcell 2025 stabilizer: conservative 9–15V DC input, 12V output for equipment drawing strictly less than 9A. XT60 to M8/Faston input leads, ANEN PA-45 output. 100g net, IP65 without immersion; mount on a metal plate. No exact fishfinder is validated.

Retail priceBenefit from the professional rate

66,02€

66,02€ ~~69,50€~~

Tax included. Shipping calculated at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

The Rebelcell OM1212100WL DC-DC stabilizer, 2025 model, supplies a stable 12V DC output for equipment drawing strictly less than 9A. Use the conservative 9–15V DC input range: the manufacturer page gives conflicting limits in different sections. Check the battery and the equipment’s electrical requirements before installation.

The manufacturer supplies two 20cm input leads, XT60 to M8 and XT60 to Faston, and specifies a 40cm output lead with an ANEN PA-45 connector. Check the exact connector and cable needed by your device. No specific fishfinder model is claimed compatible.

The aluminium housing weighs 100g net. The manufacturer states IP65, which does not permit immersion. Screw the stabilizer to a metal plate for heat dissipation, never directly onto the battery, and observe input polarity. No fuse rating is specified here because the manufacturer page gives conflicting values.

Payment and security

Your payment information and data are processed securely.

Rebelcell 12V / 9A DC Stabilizer for Electronics (2025)

66,02€

66,02€ ~~69,50€~~

Frequently Asked Questions

Need help? Contact us

What does the Rebelcell OM1212100WL stabilizer provide?

It provides a stable 12V DC output for 12V equipment drawing strictly less than 9A. It is neither a charger nor a battery.

What battery input voltage should I use?

Use the conservative 9–15V DC input range. The manufacturer page contains conflicting voltage ranges; never connect it below 9V, and have any installation outside this range technically reviewed.

Can I connect my fishfinder directly?

No specific fishfinder model is validated here. Check its voltage, maximum current, polarity, cable and exact connector before connection. The stabilizer output uses ANEN PA-45.

Which cables are supplied?

The manufacturer lists two XT60 input leads, one to M8 ring terminals and one to Faston connectors, plus an ANEN PA-45 output connection. The input leads are specified as 20cm each and the output lead as 40cm.

Can the stabilizer be immersed?

No. The manufacturer states IP65 for the housing, but this does not permit immersion. Protect the connections during installation.

Where should the stabilizer be mounted?

Do not place it on the battery. The manufacturer instructs users to screw it to a metal plate for heat dissipation. Observe battery-side polarity.

What is the net weight?

The manufacturer states 100g for the stabilizer itself. Do not confuse this net weight with the package or the included leads.

Which fuse should be used?

The manufacturer page gives two different fuse ratings. This listing does not recommend a rating; have the protection and wiring architecture checked for the exact installation.