Simrad HALO 300X with RI-50 and 10 m cable, no antenna

The Simrad HALO 300X is a 130W pulse-compression radar system designed for marine navigation. It provides target detection from 6 metres up to 96 nautical miles, enhancing situational awareness and collision avoidance. This kit includes the HALO 130W base, the RI-50 power module, and a 10-metre cable, but does not include an antenna.

The HALO 300X radar has a power output of 130W. This power output is equivalent to that of a 25 kW magnetron radar in terms of detection performance.

The HALO 300X radar system can detect targets at a minimum range of 6 meters and a maximum range of up to 96 nautical miles.

The HALO 300X uses pulse compression technology. This technology provides optimized target resolution and clarity, making navigation easier in complex areas or poor weather conditions.

The Beam Sharpening function is a technology integrated into the HALO 300X that enhances the separation of small or distant targets. It provides a sharper and more detailed radar image, which is crucial for identifying nearby objects or distant vessels.

Yes, the HALO 300X system allows simultaneous dual-range use. This feature lets you monitor distant weather conditions while observing nearby channel marks or other vessels.

The HALO 300X, with its pulse compression technology, offers several advantages:

Instant start and ready to use within seconds.Low power consumption.No warm-up time.Better detection of close and distant targets with improved clarity.Less maintenance as it does not use a magnetron.

Yes, the HALO 300X is particularly well-suited to these conditions. Its pulse compression technology and Beam Sharpening function improve target resolution and clarity, which is essential for safe navigation in complex areas such as harbors or in bad weather.

The total weight of the product, including the HALO 300X base, the RI-50 module, and the cable, is 28.21 kg.

Yes, the RI-50 interface module supplied with the system is rated IPX5 for water resistance, meaning it is protected against low-pressure water jets from all directions.

No, this product does not include the radar antenna. The kit is specified as "No Antenna" and includes only the HALO 130W pedestal, the RI-50 power module, and the 10-meter cable.

The Simrad HALO 300X is compatible with most modern Simrad multifunction displays, including the NSS evo3/3S, NSO evo3/3S series and certain models in the GO series (such as GO7 XSR, GO9 XSE, GO12 XSE, GO16 XSE). A software update may be required for optimal compatibility.

The Simrad HALO 300X system is primarily designed to operate optimally with Simrad multifunction displays. While there may be limited compatibility with other Navico brands (B&G, Lowrance) via the Ethernet network, full integration and all features are guaranteed with Simrad MFDs.

The HALO 300X kit comes with a 10-metre (33-foot) radar cable to connect the base to the RI-50 interface module.

The HALO 300X pack (SKU 000-15948-001) includes the following items:

The HALO 130W radar base (without antenna).The RI-50 interface module.A 10-meter (33-foot) connection cable.Please note that the radome antenna must be purchased separately.

The RI-50 interface module is a key component of the HALO 300X system. It must be installed in a protected but accessible location, as it manages power supply and data connection between the radar dome and your multifunction display. Its IPX5 rating provides good resistance to moisture.

Installing a marine radar system such as the HALO 300X requires technical knowledge in marine electronics and wiring. It is recommended to use a qualified professional for installation to ensure correct and safe operation of the system.

The HALO 300X radar pedestal must be installed high on the boat, typically on a mast, arch, or dedicated radar mount. The goal is to ensure a clear 360-degree line of sight, minimizing obstructions that could interfere with the radar beam and affect detection performance.

This pack includes the essential components for the Simrad HALO 300X radar system, excluding the antenna which must be purchased separately.

The HALO 300X 130W pedestal unit, which is the radar’s main unit.The RI-50 interface module, which is the system’s power supply and is rated IPX5 for water resistance.A 10-meter (33-foot) connection cable.It is important to note that the radar antenna itself is not included in this pack.

The Simrad HALO 300X radar system is designed to work with Simrad "open array" antennas.

These antennas, which take the form of a rotating bar, are available in different lengths to suit various needs and types of vessels. Common sizes include 3-, 4-, or 6-foot models.

The antenna must be purchased separately, as it is not included with this package.