Type 0.5 Autopilot hydraulic pump for 12 volt systems

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Säästad 9%

Raymarine

E12139

Pöördpumb T0.5 - 12V

La pompe réversible T0.5 - 12V Raymarine (E12139) est l'option la plus compacte de la gamme de pompes hydrauliques Raymarine, idéale pour les systèmes de pilotage automatique et vérins de 50 à 110 cc. Conçue pour une intégration fiable avec les ordinateurs de cours SPX ou les unités ACU Evolution, elle bénéficie d'une protection IP67 pour les environnements moteur. Le produit inclut la pompe hydraulique, trois joints 1/4 in BSP en caoutchouc/métal, et trois adaptateurs 1/4 in BSP vers 1/4 in NPT (si nécessaires).

Public priceGet pro pricing

880,85€

880,85€ ~~978,00€~~

Käibemaksuga Tarne arvutatakse makse tegemise ajal.

Laosolekus

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

via our network of certified installers

Find an installer

Support service

Choose additional installation support

Technical specifications

Maksimaalne elektritarve	108 W
Tüüpiline elektritarve	108 W
Töötav pinge	12 V
Töötamise temperatuur	-25°C à +55°C
Soovitatav sulavkaitse suurus	15 A
Toote laius	103 mm
Toote kõrgus	89 mm
Toote sügavus	203 mm
IP-tunnus	IP67
Montaažitüüp	Fixation boulonnée
Sertifikaadid	CE, EN60945, IEC 60529 IP67
Displacement	50-110 cc
Aktuaatori tüüp	Pompe hydraulique réversible
Sisalduvad kinnitusvahendid	Non
Kinnituse orientatsioon	Toutes orientations, à condition que le moteur ne soit pas sous le corps de la pompe
Maksimaalne rõhk	55 bar (800 psi)
Sisseehitatud roolijälguri andur	Non
Lülitatav välja	Non

Detailed description

Raymarine autopilotisüsteemide jaoks konstrueeritud Raymarine pöördpumb T0.5 - 12V (E12139) on hüdrauliline üksus, mis sobib nii olemasoleva hüdraulilise rooliga või mehaanilise rooliga laevadele, mis on varustatud teisejärgulise silindriga. See on Raymarine hüdrauliliste pumpade seeria kõige kompaktsem mudel ja sobib silindritele, mille mahtuvus on 50–110 cm³ (3,1–6,7 in³).

Töökindlus ja paigaldamine

See 0,5-tüüpi pumb pakub tipptungivust 600 cm³/min (36,6 in³/min) ilma koormuseta, maksimaalse intermitentsi rõhuga 55 bar (800 psi) 12 V juures. Tüüpiline voolutarbimine on 9 A 12 V juures 55 baari rõhu all. 12 V alalisvooluga mootor on varustatud IP67 kaitsega ja seda saab eemaldada ilma hüdraulilise süsteemi tiheduse rikkumata. Pumbas on juhtimisklapid tagasivoolu takistamiseks, et vältida manuaalse rooli kaudu tagasivoolu. See on ühilduv nii tasakaalustatud kui ka tasakaalustamata silindritega ning survepaagiga süsteemidega.

Võrdlus ja füüsikalised andmed

Pumb T0.5 (E12139) erineb Raymarine seeria kõrgematest mudelitest, nagu tüüp 1 (M81120/M81119), tüüp 2 (M81121/M81123) ja tüüp 3 (M81122/M81124), oma silindrite mahtuvuse ja vooluhulga poolest, mis teeb selle sobivaks vaid väikeste ja keskmise suurusega paigaldusteks. Kui T0.5 toetab kuni 110 cm³, siis tüüp 1 ulatub 230 cm³-ni, tüüp 2 350 cm³-ni ja tüüp 3 500 cm³-ni. Kompaktsete mõõtmetega (A: 58,4 mm, B: 203 mm) ja 1/4-tollise BSPP ühendustega on see lihtne paigaldada tekieelse ruumi, eemal soojuse ja vibratsiooni allikatest. See vastab CE nõuetele, sealhulgas elektromagnetilise ühilduvuse direktiivi 2004/108/EÜ ja standardi EN60945:2002 nõuetele.

Documentation

Type	Nom
	EN - Notice d'installation - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v
	EN - Declaration de conformite - Pompe réversible T0.5 - 12v

Expert review

Pol CONIN

Digitaalarenduse vastutaja

« Technical analysis of the Raymarine T0.5 hydraulic pump for autopilot »

The Raymarine T0.5 - 12V reversible hydraulic pump (E12139) is a critical component for autopilot systems on small to medium-sized vessels. Its specification for cylinders ranging from 50 to 110 cc positions it as Raymarine's entry-level solution for hydraulic steering, targeting sailboats or small motor yachts where the cylinder volume falls within this range. It is particularly suitable when installation space is limited, thanks to its compact dimensions.

Integrating this pump into an existing system requires careful attention to hydraulic circuit cleanliness to ensure proper operation of the integrated check valves. Installation must be carried out below deck, away from excessive heat sources or vibrations, to ensure system longevity. Its 12V design and 9A current draw at 55 bar make it compatible with the standard electrical architectures of most recreational boaters, without excessively draining service batteries—unlike larger-capacity pumps such as the Type 2 or Type 3, which can draw 24A or 34A at 12V.

Although the manual recommends installation by a Raymarine authorized service representative, for an experienced marine electronics and hydraulics installer, this pump is straightforward to implement, provided the electrical connection directives to an Evolution ACU (Actuator Control Unit) or an SPX course computer are strictly followed. It is critical to note that this pump is not suitable for large-capacity hydraulic cylinders, for which the T1, T2, or T3 models would be more appropriate.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Pöördpumb T0.5 - 12V

880,85€

880,85€ ~~978,00€~~

Complete your installation with

Complementary equipment

Raymarine

i70s multifunktsiooninäidik

Ref : E70327

678,00€

678,00€ ~~714,00€~~

Raymarine

AIS 700 klass B transponder VHF antenni jagaja integreeritud

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Raymarine

i60 tuule näidik

Ref : E70061

560,23€

560,23€ ~~594,00€~~

Raymarine

Raymarine i50 Depth sügavusekraan

Ref : E70059

514,55€

514,55€ ~~594,00€~~

Frequently asked questions

Need help? Contact us

For which type of steering system is this pump designed?

The Raymarine T0.5 reversible pump is primarily designed for vessels equipped with an existing hydraulic steering system. It can also be used on vessels with a mechanical steering system, provided it is paired with a secondary steering cylinder.

What is the maximum hydraulic cylinder capacity this pump can handle?

This T0.5 hydraulic pump is suitable for cylinders with a capacity between 50 and 110 cc (3.1 to 6.7 in³).

What are the key performance specs of the reversible pump T0.5 in terms of flow rate and pressure?

The reversible pump T0.5 delivers the following performance at 12 V:

Peak flow rate (no-load): 600 cc/min (36.6 in³/min)Maximum intermittent pressure: 55 bar (800 psi)Typical current draw: 9 A at 55 bar

Where should I install the Raymarine T0.5 pump on my boat?

The T0.5 pump is designed for installation below deck only. For optimal performance and to avoid damage, it is recommended to install it:

On a solid structure to minimize vibrations.Away from heat sources, excessive vibrations, and fumes.Clear of confined areas containing flammable materials.Preferably above the waterline.Absolute cleanliness is essential during installation of hydraulic systems to prevent dirt particles from affecting the operation of check valves.

Is this pump compatible with balanced or unbalanced hydraulic rams?

Yes, the Raymarine T0.5 reversible pump is compatible with both balanced and unbalanced hydraulic rams. It can also be used with pressurized reservoir systems.

Is the pump motor waterproof and can it be removed easily?

Yes, the pump motor is rated IP67, providing protection against temporary immersion in water. It can be removed from the pump without compromising the hydraulic system's watertight integrity or causing fluid leaks.

What are the hydraulic connections for the T0.5 pump?

All hydraulic ports on the Raymarine T0.5 reversible pump are 1/4 inch BSPP (parallel thread).

Which Raymarine autopilot systems is this pump compatible with?

The Raymarine T0.5 reversible pump is designed to be integrated with Raymarine autopilot systems. It is compatible with the SPX course computer or the Evolution ACU (Actuator Control Unit).