IP morska kamera Garmin GC™ 200

The Garmin GC™ 200 marine IP camera is a rugged, versatile surveillance solution designed to integrate seamlessly with Garmin navigation systems. This fixed camera provides enhanced visibility around the vessel, improving situational awareness for monitoring the deck, maneuvering areas, or immediate surroundings during docking or underway.

The Garmin GC™ 200 is a fixed IP marine camera providing enhanced visibility. Its main features include:

Waterproof rating certified to IEC 60529 IPX7, meaning it can withstand accidental immersion up to 1 meter for 30 minutes.A horizontal field of view of 99.2 +/- 3 degrees and vertical field of view of 74 +/- 3 degrees.Infrared vision capability up to 30 meters for nighttime monitoring.Compatibility with Garmin BlueNet™ and Garmin Marine Network networks.

The GC™ 200 camera requires an input voltage of 9 to 18 V DC for direct connection. It must be connected via a fast-blow 1 A fuse (not included) to prevent malfunction.

For 24 V DC systems, a Garmin power module (part number 010-12527-00, not included) must be used to prevent damage to the camera. With the power module, the input voltage range is 9 to 32 V DC.

Yes, the Garmin GC™ 200 camera has an IEC 60529 IPX7 waterproof rating. This means it can withstand accidental immersion in water up to 1 meter deep for 30 minutes.

The GC™ 200 camera is compatible with Garmin BlueNet™ networking technology and Garmin Marine Network devices.

If your boat is equipped with a Garmin BlueNet chartplotter, you can connect the camera directly using the included Garmin BlueNet cable. If your boat is equipped with a Garmin BlueNet chartplotter and uses a Garmin BlueNet 30 gateway, you can connect the GC™ 200 directly to a BlueNet device or to a Garmin Marine Network device via a Garmin Marine Network adapter cable (part number 010-12531-01, not included if not provided). If your boat is equipped only with Garmin Marine Network devices, using the Garmin Marine Network adapter cable (part number 010-12531-01, not included if not provided) is mandatory for connection.

When installing the GC™ 200 camera, the following points must be considered:

The camera can be mounted upside down or sideways, and the image can be flipped for a rear-view mode. Choose a location where it will not be submerged, pose no hazard in doors or passageways, and cannot be damaged by docks or other equipment. The mounting surface must be strong enough to support the camera’s weight and allow for its removal. Install the camera so the LED is visible and cables can be connected easily. To avoid interference with a magnetic compass, maintain a safety distance of 10 cm (4 inches) from the compass. It is recommended to test the camera in the chosen location before permanently securing it.

To install the Garmin GC™ 200 camera, you will need the following tools:

A drill and a 2 mm (1/16 in) bit.A Pozidriv® screwdriver.The hex key included with the camera.

Yes, the Garmin GC™ 200 marine IP camera is covered by Garmin's standard limited warranty.