Bočna svjetiljka 1MN - brod <12m - lijevo (crvena 112.5°)

This is a navigation light specifically designed for the port side (left) of the boat. It emits a red light over a 112.5° arc and is part of the Mantagua Tiny range, known for its lightweight and compact design.

This Mantagua Tiny lateral light has a luminous range exceeding 1 nautical mile (NM), making it compliant with safety requirements for coastal and inland navigation.

This navigation light is suitable for vessels under 12 meters (39 feet).

The Mantagua Tiny side light (port) requires a regulated 12V DC power supply.

The light's dimensions are: total height 72 mm (30 mm for the light body and 42 mm for the base) and a diameter of 40 mm.

Yes, it is fully epoxy-resin encapsulated, providing IP67 waterproofing and enhanced vibration resistance, ensuring reliable operation in the most demanding marine environments.

The operating temperature range of this light is between -20°C and 50°C.

This port side light emits a red light, in accordance with maritime signaling standards.

The light is diffused over a 112.5° arc, which meets the required signalling for a port-side light.

The luminous intensity of this light is greater than 1.1 candela, ensuring visibility at 1 nautical mile.

For installation, use hose clamps (for the TINY BALCON version). The cable must be routed through the light base, then the base is secured to the light using the 2 provided screws. Finally, the light is attached to the mast with 4 mm stainless steel screws, also provided.

Stainless steel screws of ø 4 mm are provided for securing the light to the mast, ensuring resistance to the marine environment.

You must orient the boat symbol on the top of the light toward the bow of the boat to ensure correct and regulation-compliant signaling.

A minimum cable cross-section of 0.5 mm² is recommended for power supply wiring to ensure a reliable electrical connection.

For wiring, the blue wire must be connected to the negative terminal (-) and the white wire to the positive terminal (+12V DC).

No, the light must be assembled onto its bracket manually; an electric drill is not required for this step.

No, this specific model (ref. 00133) is a port-side (red 112.5°) navigation light and is designed solely for this position. For other positions such as starboard (green) or stern (white), other models from the Mantagua Tiny range are available.