ÚRELDUR - Contour Matrix 600-GDL

The detector integrates an automatic shutdown solenoid control with pulse-and-hold circuit technology for low power consumption. It also features dual-sensor capability, provision for an external alarm, and provision for automatic bilge fan switching.

The BEP Contour Matrix 600-GDL gas detector requires a 10V to 15V DC power supply.

The total maximum current consumption of the 600-GDL detector is 350 mA.

In case of gas presence, the sensor lights up red and a rapid audible alarm sounds.

The green light indicates that the sensor is in a safe state, no smoke is detected, and no alarm is sounding.

The orange light indicates that a sensor failure has been detected and a slow beeping sound is sounding.

Bypass mode disables the sensor. A flashing green light indicates the sensor is disabled and in a safe state. A flashing orange light indicates the sensor is disabled and a fault has been detected.

If the sensor is wet, it becomes inoperative and must be replaced.

The sensor cable provided is 5 meters long.

Yes, the 600-GDL model features an integrated automatic solenoid shutoff control.

Yes, the 600-GDL detector has a manual override function that disables the gas detector.

Yes, the detector has a provision for connecting an external alarm.

Yes, the detector is equipped with a provision for automatic switching of the bilge fan.

The BEP Contour Matrix 600-GDL detector has a dual-sensor capacity, meaning it can support two sensors.

During the preheating phase, all indicators flash orange at a slow average rate.

The maximum current per output of the detector is 800 mA.

Yes, the 600-GDL detector integrates pulse and hold circuit technology for solenoid control, enabling low power consumption.

Yes, the BEP Contour Matrix 600-GDL gas detector is a marine safety solution.

The detector uses several visual indicators:

Green: Sensor safe, no gas detected.Red: Gas alarm triggered.Orange: Sensor failure detected.Flashing green: Bypass mode activated, sensor disabled and safe.Flashing orange: Bypass mode activated, sensor disabled and failure detected.