Rafskiljar 350 A

The BEP BAT SW B1B2 SELECTOR 350A CONT MC10 battery selector is a rotary switch designed to efficiently manage your boat's electrical power supply. It allows you to select one of two batteries (1 or 2), use both batteries simultaneously (Both), or completely cut off power (Off).

This BEP battery selector is designed to handle a continuous current of 350 amperes (A). This capacity ensures stable and secure power supply for most critical marine equipment.

This battery selector is primarily designed for 12V DC systems. However, it can support voltages up to 48V Max, making it compatible with 12V, 24V, or 48V DC systems.

The BEP BAT SW B1B2 selector is specifically designed to manage two separate battery banks, typically named Battery 1 (B1) and Battery 2 (B2).

This selector offers four main positions for flexible energy management:

1: Selects battery bank 1 only.
2: Selects battery bank 2 only.
Both: Connects both battery banks in parallel.
Off: Disconnects all batteries from the circuit.

Yes, this battery selector is a critical component designed specifically for reliable power management aboard vessels, ensuring durable performance in the marine environment.

Using a battery selector switch provides several critical advantages for a boat:

Flexible management: Allows selection of the power source (battery 1, battery 2, or both).Isolation: Isolates batteries to prevent cross-discharge or for storage.Emergency start: Enables using a service battery to start the engine if the starter battery fails.Safety: Provides an OFF position to cut all electrical power to the boat.

Yes, although designed for 12V DC systems, this selector can handle continuous voltages up to a maximum of 48V. It is therefore compatible with 24V and 48V DC systems.

Yes, this battery selector is an electrical switch that manages current flow and voltage, regardless of the internal chemistry of the batteries. It is therefore compatible with different types of batteries, including lead-acid batteries (gel, AGM, flooded) and lithium batteries, provided that the voltage and direct current specifications are met.

Yes, a battery selector is an essential component in an alternator charging system. It directs the charging current from the alternator to the selected battery bank or to both banks, ensuring efficient and safe recharging.

Yes, this product is typically supplied with detailed installation instructions to facilitate its correct mounting and connection on your boat.

To connect this battery switch, use heavy-gauge marine-grade cables. Cable diameter must be selected based on the maximum amperage (350A for this switch) and cable length to minimize voltage drop and ensure system safety.

When installing this selector, it is crucial to follow electrical safety precautions. Ensure all power sources and batteries are disconnected before starting installation. Strictly adhere to wiring diagrams and polarity to avoid short circuits or equipment damage.

Installing this switch typically does not require specialized tools. Basic tools such as a screwdriver, socket wrench, wire strippers, and crimping pliers for cable terminals will be sufficient.

Yes, like most BEP products, this battery selector is covered by the manufacturer's warranty. For specific details regarding the duration and warranty conditions, please refer to the documentation provided with the product or contact customer service.