ATO/ATC línuframslegur vatnsþéttur fylgihaldari

The Blue Sea 5065-BSS waterproof ATO/ATC inline fuse holder is designed to provide individual and localized protection for marine electrical circuits. It is installed directly on the wiring to protect a specific piece of equipment from overcurrent situations where a larger fuse block would be impractical.

This fuse holder is compatible with ATO (Automotive Type Original) and ATC (Automotive Type Closed) fuses, providing flexibility in selecting the appropriate amperage for each circuit.

The main feature of this fuse holder is its watertight design. It is specifically designed to withstand water splashes and humidity, which is essential to ensure the reliability and durability of electrical connections in marine environments.

Installation is straightforward: the fuse holder is integrated directly inline on the wire of the circuit you wish to protect. You need to cut the wire, strip the ends, then connect the fuse holder using appropriate connectors (not included) to ensure a secure and watertight connection.

Yes, absolutely. Its watertight design and robust construction are specifically designed to withstand the demanding conditions of marine environments, including water spray, humidity, and corrosion.

The Blue Sea 5065-BSS fuse holder can support a maximum voltage of 32 volts DC.

This fuse holder is designed to support a maximum amperage of 30 amperes. It is important to select a fuse with an amperage rating suitable for the circuit being protected, without exceeding this limit for the fuse holder itself.

The 5065-BSS fuse holder comes with pre-installed 12 AWG (American Wire Gauge) wires, which is the recommended cable size for optimal connection.

No, the Blue Sea 5065-BSS fuse block is sold alone. ATO/ATC fuses of the required amperage must be purchased separately to match the specific requirements of your circuit.

Yes, although designed for the marine environment, this fuse holder can be used in other applications, such as automotive or recreational vehicles, provided the voltage specifications (32V DC) and amperage (30A max) match the needs of the circuit to be protected, and that waterproofing is a desired feature.

An inline fuse holder offers several advantages:

Localized protection: It protects a single device or a specific circuit without requiring a larger fuse block.Space saving: Its compact size is ideal for tight spaces.Superior waterproofing: Its waterproof design protects the fuse and connection from moisture and corrosion, which is critical in exposed environments.Installation flexibility: It can be installed anywhere along the circuit wire.

To choose the correct fuse amperage, you must know the rated current of the device or circuit you wish to protect. The fuse must be slightly higher than the normal operating current of the device, but low enough to melt and interrupt the circuit in case of overcurrent, thus protecting the equipment and wiring.

Installation requires basic electrical wiring tools, such as wire strippers to prepare the wires, crimping pliers to secure connectors (if using terminals or heat-shrink sleeves), and optionally a voltage tester to check the circuit.

Yes, the primary function of a fuse is to protect the circuit from overcurrents, including those caused by a short circuit. In the event of a short circuit, the fuse will melt quickly, interrupting the current flow and thus protecting the wiring and connected equipment from potential damage.

Yes, due to its high-quality materials, such as a durable plastic body and tinned copper contacts, as well as its waterproof design (IP66), the 5065-BSS fuse holder is engineered to provide excellent resistance to corrosion, even in saline and humid marine environments.

It is generally recommended to install the fuse holder as close as possible to the power source or the device it is intended to protect. This ensures that most of the wiring is protected against overcurrents.

This fuse holder is manufactured by Blue Sea Systems, a brand known for its high-quality electrical products for marine applications and specialized vehicles.