Deckhand Dimmer - 24V DC 6A - Deckhand Dimmer - 24V DC 6A

Deckhand Dimmer - 24V DC 6A - Dimensioned Drawing

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Spara 17%

Blue Sea Systems

7504-BSS

Stýrir Deckhand 24 V DC 6 A

Q: What is the BLUE SEA Deckhand 7504-BSS dimmer?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

Q: What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS variable speed drive operates on a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

Q: What is the maximum output current this drive can handle?

The Deckhand 7504-BSS drive can deliver a maximum output current of 6 amperes (6 A).

Q: How does the Deckhand dimmer control the brightness of the lights?

Brightness is controlled via pulse-width modulation (PWM), ensuring smooth and progressive adjustment of light intensity.

Q: What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

Q: How to use the illuminated output with delay function?

To activate the illuminated output function:For a one-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute.For a 2 to 5-minute delay: After the first flash, hold the switch in the high (illuminated) position for 1 to 4 seconds. Release the switch after 2 to 5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

Q: What to do if the drive stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch pressed until the circuit flashes to reset it.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer features a memory function that stores the last used light intensity setting.

Q: What is the operating temperature range of this drive?

The drive is designed to operate across a wide temperature range, from -40°C to 85°C.

Conçu pour les systèmes 24 V CC, le variateur Deckhand 7504-BSS de BLUE SEA offre un contrôle numérique précis de l'intensité lumineuse pour les LED non régulées, les ampoules à incandescence et halogènes, avec un courant de sortie maximal de 6 A. Ce modèle se positionne comme la solution 24 V 6 A de la gamme Deckhand, proposant des fonctionnalités telles qu'une sortie illuminée temporisée et une mémoire de réglage. Il inclut un interrupteur momentané (ON)-OFF-(ON).

Spenna: 24 V

12 V 24 V

Rafstraumur: 6 A

6 A 12 A

Retail priceGet pro pricing

102,30€

102,30€ ~~124,32€~~

með skatti Sendingar reiknaðar við greiðslu.

Á lager

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Technical specifications

Tegund stjórnunarviðmóts	Interrupteur momentané (ON)-OFF-(ON)
Tegund stjórnunar	Modulation de largeur d'impulsion (PWM)
Samhæf lýsikerfi	LED non régulées, incandescentes, halogènes
Zone Control	Non
Virkjunarspennuviðmið	18 à 32
Venjuleg rafnspening	<0.048
Gerð uppsetningar	Montage sur panneau
Mælieiningar vörunnar	82.55 x 88.9 x 50.8 mm
Rýmkastillur styðja	Oui
Innihald pakka	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Vörunúmer	SK-000051475
Vottanir	E marked, ISO 8846, SAE J1171, SAE J1455, SAE J1113
Maximum Parasitic Current	<2 mA
Hámarksstraumur út	6 A
Nefnd spenna	24 V CC
Odoo Category Full Path	Marchandise / NAVICO GROUP / 13 - Blue Sea BSS (35)
Hitastigsviðmið við notkun	−40°C à 85°C
SKU	7504-BSS
Gerð	Variateur d'intensité

Detailed description

Hönnuð til að bæta lýsingu um borð, er Deckhand 7504-BSS stýrir frá BLUE SEA stafræn lausn til að stjórna ljóslögmáli fyrir 24 V DC kerfi. Hann gerir kleift að stjórna óstjórnuðum LED-ljósum, glóðarperum og halógenperum. Útgangsútlitið hefur lýsandi virkni með stillanlegum töfum fyrir öryggi við umskipun og brottför, með möguleikum á 1 til 5 mínútum. Stýririnn styður mörg staðsetningar fyrir rofa og hefur minni fyrir síðasta stillingu ljóslögmáls.

Eiginleikar og afkastagildi

Innbyggt "bulb saver" lengir líftíma glóðarpera við hleðslu rafhlöðunnar. Misjafnar festingartungur auðvelda samhliða uppsetningu á fleiri en einum stýri, sem sparar pláss í rafmagnsborðinu. Innbyggt öryggisvarnarkerfi fyrir ofstraum verndar rafrásina, og kerfið getur verið endurræst með því að halda rofa stýrisins inni þangað til rafrásin blikkar.

Tæknispecificeringar og samræmi

Með nafnspennu 24 V DC og starfræna spennuspönn 18 V til 32 V, gefur Deckhand 7504 út 6 A hámarksstraum. Sníkjarneysla er minni en 2 mA og hann starfar í breiðri hitastigsröð frá −40°C til 85°C. Stjórnun ljóslögmáls fer fram með púlsbreiddarmótun (PWM), sem tryggir mjúka breytingu. Þessi vara er samrýmd við E, ISO 8846 og SAE J1171 fyrir varnir gegn ytri kveikju, sem staðfestir áreiðanleika í sjávarumhverfi.

Staðsetning innan BLUE SEA vörulínu

Innan Deckhand vörulínu frá BLUE SEA er 7504 módelið sett sem viðmiðunarpunktur fyrir 24 V DC 6 A. Hann fyllir upp í 12 V DC útgáfur, svo sem 7506 (6 A), 7507 (12 A) og 7508 (25 A), ásamt öðrum 24 V DC módelum með meiri afl, svo sem 7509 (12 A). Þessi stýrir er hannaður til að koma í stað eldri módela svo sem 7501 eða 7502, með bættri afkastagildi í straum og eiginleikum fyrir 24 V kerfi.

Documentation

Type	Nom
	EN - Instructions - Deckhand Dimmer - 24V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 24V DC 6A

Payment and security

Your payment information and data are processed securely.

Stýrir Deckhand 24 V DC 6 A

102,30€

102,30€ ~~124,32€~~

Frequently asked questions

Need help? Contact us

What is the BLUE SEA Deckhand 7504-BSS dimmer?

The BLUE SEA Deckhand 7504-BSS dimmer is a digital device designed to control the light intensity of onboard boat lighting. It is specifically designed for 24 V DC systems and manages unregulated LEDs, incandescent bulbs, and halogen lights.

What types of lighting can this dimmer control?

This dimmer is designed to control the intensity of unregulated LEDs, incandescent bulbs, and halogen lights.

What is the required operating voltage for this variable speed drive?

The Deckhand 7504-BSS variable speed drive operates on a nominal voltage of 24 V DC. Its operating range is from 18 V to 32 V DC.

What is the maximum output current this drive can handle?

The Deckhand 7504-BSS drive can deliver a maximum output current of 6 amperes (6 A).

How does the Deckhand dimmer control the brightness of the lights?

Brightness is controlled via pulse-width modulation (PWM), ensuring smooth and progressive adjustment of light intensity.

What is the 'Bulb Saver' function and how does it work?

The 'Bulb Saver' function is an integrated system that extends the lifespan of bulbs. It prevents excessive aging of bulbs when the boat's batteries are being charged.

How to use the illuminated output with delay function?

To activate the illuminated output function:

For a one-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash and the lights will remain on for 1 minute.

For a 2 to 5-minute delay: After the first flash, hold the switch in the high (illuminated) position for 1 to 4 seconds. Release the switch after 2 to 5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

What to do if the drive stops working due to an overcurrent?

The Deckhand drive is equipped with built-in overcurrent protection. If the unit stops working, first correct the cause of the overload (excessive current load), then hold the drive switch pressed until the circuit flashes to reset it.

Does the dimmer store the last brightness setting?

Yes, the Deckhand dimmer features a memory function that stores the last used light intensity setting.

What is the operating temperature range of this drive?

The drive is designed to operate across a wide temperature range, from -40°C to 85°C.

What is the power consumption of the drive in standby (parasitic) mode?

The Deckhand drive’s maximum parasitic consumption is less than 2 mA.

Is it possible to use this dimmer with 12 V DC electrical systems?

No, this specific model (7504-BSS) is designed for 24 V DC systems. BLUE SEA offers other Deckhand models for 12 V DC systems.

Can multiple switches be connected to the Deckhand dimmer to control lights from different locations?

Yes, the Deckhand dimmer is designed to support multiple switch locations, allowing brightness control from different points aboard.

How do offset mounting tabs facilitate installation?

The offset mounting tabs allow multiple drives to be installed side by side in a compact arrangement, thus optimizing the available space on the electrical panel.

What type of switch is included with the Deckhand 7504-BSS dimmer?

The dimmer is supplied with a momentary (ON)-OFF-(ON) switch (PN 8216 reference).

How to connect the inverter to the boat's electrical system?

The dimmer connects as follows:

The red wire connects to the +24V DC power supply.The two black wires connect to ground (negative bus bar).The blue wire connects to the lamp.The grey and white wires are the inputs for the switch (Down Input and Up Input).A fuse must be installed on the +24V DC line before the dimmer.

What are the dimensions of the Deckhand 7504-BSS autopilot drive?

The Deckhand 7504-BSS autopilot drive has a width of 3.25 inches (82.55 mm) and a height of 3.5 inches (88.9 mm).

Is the Deckhand 7504-BSS variable frequency drive compliant with marine standards?

Yes, this variable frequency drive is marked E and complies with the external ignition protection requirements of ISO 8846 and SAE J1171 standards. It also meets SAE J1455 and SAE J1113 standards.

Can I use this dimmer with LEDs that already have an integrated driver?

No, the Deckhand 7504-BSS dimmer is specifically designed for unregulated LEDs, as well as incandescent and halogen bulbs. Using it with already regulated LEDs may not work correctly or could damage the dimmer or lights.