GPSMAP® 1022 - skjáborðsskjá 10"

The GPSMAP® 1022 is compatible with several third-party network cameras and Garmin cameras:

FLIR M and MD series thermal cameras.Garmin GC™ 14 cameras (part number 010-02667-00).Garmin GC™ 200 cameras (part number 010-02164-00).To connect standard Ethernet devices, including network cameras, to the Garmin marine network, it is mandatory to use a Garmin Power over Ethernet (PoE) isolation coupler (part number 010-10580-10). Directly connecting a PoE device to a Garmin chartplotter will damage the chartplotter. FLIR IP cameras are generally plug-and-play and are automatically detected, while older FLIR analog cameras require manual pairing with a video input.

For flush-mounting the GPSMAP® 1022, the recommended cut-out dimensions are as follows:

Width: 304.3 mm (12 inches)Height: 166.1 mm (6 9/16 inches)It is strongly recommended to use the mounting template provided in the product box to ensure precise cutting and avoid damaging the mounting surface of your boat.

Yes, a Garmin Power over Ethernet (PoE) isolation coupler (part number 010-10580-10) is absolutely required to connect any standard Ethernet device, such as a network camera, network switch, or PoE injector, to a Garmin marine network. Connecting a PoE device directly to a Garmin chartplotter will damage the chartplotter and potentially the PoE device. Using a shielded cable, such as a CAT 5e F/FTP, is also recommended for optimal protection of your equipment.

Yes, the GPSMAP® 1022 supports camera tracking features, provided compatible cameras and sensors are connected. These features include:

Compass lock: To keep the camera fixed in a specific direction. Vessel lock: To lock the camera at a fixed angle relative to the vessel. Target tracking: To track AIS targets, MARPA, or waypoints (referred to as "slew-to-cue").

To use these functions, you must connect a compatible marine camera with tracking capability (such as a recent FLIR IP video camera), a GPS antenna, and a heading sensor (ideally 9-axis for better performance). For AIS and MARPA tracking, a compatible AIS receiver and a compatible radar device are also required.

Yes, the GPSMAP® 1022 is compatible with FLIR M-Series cameras, whether they have network video output or not. FLIR IP cameras are generally detected automatically. For FLIR M-Series models without network video output, or older analog cameras, pairing the camera with a chartplotter-integrated video input may be required. In all cases, a Garmin PoE isolation coupler (010-10580-10) is required to connect these cameras to the Garmin marine network.