Fjarstýrður HM-195GW

The HM-195GW (Command Mic™) is a remote control interface. It allows you to operate your Icom fixed VHF radio from a secondary navigation station, such as a cockpit or flybridge, by replicating all functions of the main unit.

Yes, absolutely. The HM-195GW integration gives you full access to Digital Selective Calling (ASN/DSC) functions, allowing you to initiate a distress alert directly from your secondary helm station.

Yes, it is designed for harsh marine environments. Its watertight housing provides effective protection against spray and weather, allowing it to be installed in exposed outdoor locations (such as a flybridge) without risk of damage.

Yes, the HM-195GW turns your network into a full intercom system. You can communicate directly between the remote microphone and the main VHF station, making exchanges with other crew members easier.

The IC-M410BB modular system supports up to two Command Mic™ stations simultaneously for onboard communication management.

The microphone is equipped with an instant-access button for channel 16. This ensures optimal and immediate responsiveness in emergency situations at sea.

Yes, the HM-195GW has a backlit display that ensures perfect readability of data, whether in bright sunlight or during nighttime sailing.

No, the remote microphone is powered directly by the main VHF radio via its connection cable. No additional power supply is required during installation.

No, the HM-195GW is not a standalone radio. It is a remote control interface that must be connected to a compatible Icom VHF radio to function.

No, the Command Mic™ HM-195GW uses a proprietary communication protocol. It is exclusively compatible with Icom-brand VHF radios listed in its specifications.

No, one of the HM-195GW’s major advantages is that it faithfully reproduces the ergonomics, menus, and display of the main unit. You do not need to learn a new interface.

The microphone connects to the main VHF using a dedicated extension cable. This cable plugs into the specific port located at the rear of the radio or on the black box.

Yes, the microphone can be disconnected from its base. It is also recommended to replace the waterproof cap on the deck socket connector when the handset is unplugged, to protect the contacts from marine corrosion.

Yes, this is not a simple microphone but a full handset. It includes a speaker that allows clear reception of VHF communications and intercom exchanges.

Due to its waterproofing, the most common installation locations are:

The exterior cockpitThe flybridgeA second helm stationThe chart table (if the VHF is installed elsewhere)

Yes. You have full control over the master VHF. You can change channels, adjust volume, modify the squelch level, and navigate all menus directly from the HM-195GW.

Yes, consistent with Icom’s reliability standards, this microphone is built to withstand the most demanding conditions. Its rugged housing and waterproofing ensure optimal operation even under heavy water spray or spray.