Navico NAC-D Ordinateur de pilote automatique

Navico NAC-D Ordinateur de pilote automatique - photo 2

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Spara 25%

Navico

000-15621-001

NAC-D Tölva fyrir sjálfstýringu

The Navico NAC-D (000-15621-001) autopilot computer is a steer-by-wire solution designed for Electronic Vessel Control (EVC) systems. It integrates with electronic steering systems from Volvo IPS/EVC, Yamaha Helm Master, SeaStar Solutions Optimus, and Yanmar VC10/JC10 via NMEA 2000. This compact computer delivers precise steering using Continuum Steering and SteadySteer technology. The product includes the NAC-D computer with integrated Micro-C connectors for simplified installation.

Retail priceGet pro pricing

1.008,76€

1.008,76€ ~~1.346,94€~~

með skatti Sendingar reiknaðar við greiðslu.

Á lager

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Technical specifications

Hámarksrafnspening	750 W
Venjuleg rafnspening	Selon l'actionneur de barre
NMEA 2000 jafngild spennukeppni (LEN)	1
Virkjunarspenna	12/24 V DC
Hitastig við notkun	-25 à +55
Tillögð öryggisbráð	30 A
Breidd varahlutar	86.5 mm
Hæð vörunnar	20.0 mm
Dýpt vörunnar	11.5 mm
IP-stig	IPX5
Samhæfni við gagnabraut	NMEA 2000,NMEA 0183
Fasttengt net	NMEA 2000
Gerð festingar	Montage en surface
Vottanir	CE,IEC 60945
Stýringarstillingar	Auto, Vent, Navigation, Dérive nulle, Barre manuelle
Gerð drifhluta	Direction par câble ou numérique (Volvo, Yamaha, Optimus, Yanmar)
Tvöföld stýristöng	Oui, via l'intégration avec les systèmes de direction électronique (EVC)
Baudhraði NMEA 0183	4.8, 9.6, 19.2, 38.4
NMEA 0183 skilaboð	1 port IN/OUT (4.8, 9.6, 19.2 & 38.4 kbaud)
NMEA 0183 tengingar	1
Hitastig við geymslu	-30 à +70
Uppsetning í vafra	Non
Hjálp við hreyfingarréttun	Oui
Alarm output	Oui
Alarm Output Max Current Ma	100
Australian Business Number	96124340898
Boat Type Compatibility	Configurable
Örugg fjarlægð frá áttavita (mm)	500
Samfelldur straumur (A)	8
Drive Output Current Max A	3
Drive Output Current Min Ma	10
Drive Output Voltage	12/24 V DC
EMC stefna	2014/30/EU
EMC prófunarstofa	TÜV SÜD America Inc.
EMC prófunarskýrslunúmer	SC1406321
Eu Authorized Representative Address	Navico Holding AS, Nyaaskaiveien 2, NO-4374 Egersund, Norway
Hs Code Full	9014804000
Hámarksraki við notkun	100
Maritime Navigation Standard	Maritime Navigation and radiocommunication equipment and Systems – General Requirements – Methods of testing and required test results.
Nmea0183 Bidirectional	Oui
NMEA 2000 tengiliðategund	Micro-C
Nmea2000 Port Count	1
Nominal Drive Voltage Options	12 V,24 V
Þyngd pakka	0.208
Hámarkstraumur (A)	12
Þyngd	0.7
Radiocommunications Standard	Radiocommunications (Electromagnetic Compatibility) standard 2017
Dagsetning RCM yfirlýsingar	1 - Nov - 2016
Rcm Declaration Entity Address	Unit 5/12 Mars Road Lane Cove NSW 2066 Australia.
Rcm Declaration Entity Name	Navico Australia Pty Ltd.
Undirritandi RCM yfirlýsingar	Howard Evans / Operations director
Rudder Feedback Voltage Range	0-5 V
Shock And Vibration Standard	EN60945
Steering System Brand Compatibility	Volvo,Yamaha,Optimus (SEASTAR),Yanmar
Supply Voltage Tolerance Percent	+/- 10-30
Raðnúmeraspilun	serial
Vessel Length Compatibility M	Configurable
Ábyrgð	2

Detailed description

Hönnuð fyrir nútímalegar rafrænar stýrikerfisáttir er Navico NAC-D tölvan (vörunúmer 000-15621-001) lausn fyrir "steer-by-wire". Hún tryggir beina tengingu við rafrænar vélastýrikerfi (EVC) frá vörumerkjum á borð við Volvo IPS/EVC, Yamaha Helm Master/single engine, SeaStar Solutions Optimus og Yanmar VC10/JC10. Aftur á móti einfaldar NAC-D uppsetningu verulega með beinni tengingu í gegnum NMEA 2000 netið, án þess að þurfa viðbótar vökvakerfi eða stillingar á stýri við bryggju.

Tengingar og samþætting

NAC-D einkennist af NMEA 2000 tengingu með tveimur Micro-C tengipörtum og 2 LEN til að tryggja samhangandi tengingu í skiparafræðikerfi skipa. Hún styður ekki NMEA 0183, Bluetooth eða Wi-Fi, heldur einbeitir sér að áreiðanlegri samskiptum með CAN-bus fyrir Optimus stýrikerfi. Tækið er knúið af CAN-neti (9-16V) með venjulegri neyslu á 40mA, sem gerir það orkuskilvirkt. Stýring getur farið fram með sérstökum stýripöntum eins og AP 44 eða AP 48, eða með samþættingu við Simrad fjölnota skjáa.

Afkastageta og stýriföll

Þessi tölva inniheldur Navico Continuum Steering tækni sem tryggir nákvæma og áreiðanlega stefnuhaldsgetu. SteadySteer™ fallið bætir stýriframistöðu við mismunandi seglunarstefnur með sjálfvirku skipti milli tveggja hraðaprófíla. NAC-D býður upp á víðtæka valmöguleika fyrir flókna beygjuáætlun, meðal annars U-beygju, spírálbeygju, zick-zack, C-beygju, ferningsbeygju, S-beygju og dýptarfylgni (Depth Counter Tracking). Með IP44 vörn, 0,1 kg þyngd og þéttum málum (86,5 x 20,0 x 11,5 mm) er hún auðveldlega sett inn í rafrásina með 0,5 metra öryggisbil frá áttavita.

Documentation

Type	Nom
	EN - Manuel de mise en service - NAC-D Ordinateur de pilote automatique
	EN - Guide d'installation - NAC-D Ordinateur de pilote automatique
	EN - Guide d'installation - NAC-D Ordinateur de pilote automatique
	EN - Manuel de mise en service - NAC-D Ordinateur de pilote automatique
	FR - Manuel de mise en service - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de Conformité CE - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de conformité - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de Conformité RCM - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de Conformité CEM - NAC-D Ordinateur de pilote automatique
	EN - Déclaration de conformité CE - NAC-D Ordinateur de pilote automatique
	EN - Guide d'installation - NAC-D Ordinateur de pilote automatique

Expert review

Pol CONIN

Stjórnandi stafrænna hluta

« Digital intelligence serving modern electronic steering systems »

The Navico NAC-D represents a significant evolution in autopilot computer technology, specifically designed for steer-by-wire steering architectures and electronic engine control systems (EVC). Its practical value is maximized for owners of vessels equipped with modern propulsion systems such as Volvo IPS, Yamaha Helm Master, SeaStar Optimus, or Yanmar, who seek to integrate an autopilot without the complexity of traditional hydraulic systems.

From an installation perspective, the NAC-D greatly simplifies the process. It requires no additional hydraulic pump, no rudder angle sensor installation, nor any dockside rudder calibration. Integration is primarily via the NMEA 2000 network, with only two Micro-C connectors to plug in. This significantly reduces installation time and complexity compared to NAC-2 or NAC-3 computers, which are intended for conventional hydraulic steering systems. It is crucial to note that the NAC-D is not a universal solution; the vessel must already have a compatible electronic steering system for this computer to function.

The NAC-D’s differentiation lies in its role as a direct digital interface between the autopilot and the engine’s electronic steering system. It does not "drive" a pump but sends precise digital commands to the existing EVC system. This makes it particularly suitable for modern motorboats where space is often limited and where the reliability of a fully digital control chain is desired. However, its main limitation is its dependence on a pre-existing EVC system; it cannot be used to convert a hydraulic or mechanical steering system into an autopilot without a major rudder overhaul.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

NAC-D Tölva fyrir sjálfstýringu

1.008,76€

1.008,76€ ~~1.346,94€~~

Complete your installation with

Complementary equipment

B&G Pupitre de commande du pilote automatique Triton²

B&G Pupitre de commande du pilote automatique Triton² - photo 2

B&G

Stjórnpallur fyrir sjálfstýringu Triton²

Ref : 000-13296-001

325,56€

325,56€ ~~434,70€~~

Simrad

NSX 3012 12" sporbauður

Ref : 000-15223-001

2.741,39€

2.741,39€ ~~3.298,80€~~

B&G Traceur de cartes Zeus 3S 9" avec carte de base du monde

B&G Traceur de cartes Zeus 3S 9" avec carte de base du monde - photo 2

B&G

Kortspari Zeus 3S 9" með heimskorti

Ref : 000-15411-001

2.249,10€

2.249,10€ ~~2.998,80€~~

B&G Traceur de cartes Zeus 3S 12" avec carte de base du monde

B&G Traceur de cartes Zeus 3S 12" avec carte de base du monde - photo 2

B&G

Kortateiknari Zeus 3S 12" með heimskortasafni

Ref : 000-15412-002

3.981,96€

3.981,96€ ~~4.772,38€~~

Zeus³S Glass Helm 19" Display Only | B&G Sailing USA

B&G

Skjáborð Zeus³S Glass Helm MFD 19"

Ref : 000-15050-001

7.270,90€

7.270,90€ ~~8.788,32€~~

B&G Afficheur numérique Triton² 4,1" - photo 2

B&G

Triton² 4,1" tölvuskjár

Ref : 000-13294-001

525,96€

525,96€ ~~648,90€~~

B&G

Sýnirinn NEMESIS

Ref : ODOO-511

0,00€

B&G

Némésis-hub

Ref : 000-15683-001

354,34€

354,34€ ~~472,50€~~

B&G

Nemi-kabill fyrir B&G

Ref : 000-15740-001

81,36€

81,36€ ~~82,80€~~

B&G Écran d'affichage 10/10HV pour système H5000/Triton

B&G

Sýndarskjá 10/10HV fyrir H5000/Triton kerfi

Ref : 000-11087-001

576,26€

576,26€ ~~755,32€~~

B&G 20/20HV Display | Pacific Yacht Systems

B&G

Skjávarp 20/20HV fyrir H5000/Triton kerfi

Ref : 000-11088-001

865,39€

865,39€ ~~1.079,77€~~

B&G Écran d'affichage 30/30HV pour système H5000/Triton

B&G

30/30HV sýniskjár fyrir H5000/Triton kerfi

Ref : 000-11089-001

1.601,63€

1.601,63€ ~~2.141,38€~~

Frequently asked questions

Need help? Contact us

What is the NAC-D autopilot computer used for?

The NAC-D is the decision-making core of your autopilot system. Unlike classic models, it is specifically designed to directly control electronic and digital cable-driven steering systems, delivering exceptionally precise steering.

Which steering systems is the NAC-D computer compatible with?

This computer is optimized for modern electronic steering systems. It is notably compatible with Volvo, Yamaha, Optimus (SeaStar), and Yanmar steering systems.

What is the difference between the NAC-D and the NAC-2 or NAC-3 models?

The NAC-2 and NAC-3 controllers are designed to deliver high power output (up to 750 W) to drive hydraulic pumps or mechanical actuators. The NAC-D, by contrast, is dedicated to the direct control of digital steering systems, which do not require this level of output power.

Does the NAC-D support the SteadySteer function?

Yes, the NAC-D natively integrates support for the SteadySteer assistance technology. This allows you to take manual control at any time to make a heading correction without needing to disengage the autopilot beforehand.

Which turning modes does the NAC-D autopilot support?

The NAC-D features advanced navigation algorithms with multiple turning models: Spiral, Zigzag, and continuous rate of turn. It also automatically adapts to the vessel's dynamics via its profile transition function between low and high speeds.

Which steering systems is the NAC-D autopilot computer compatible with?

The NAC-D autopilot computer is designed to be compatible with several popular steering systems. According to the documentation, it is compatible with:

Volvo®, Yamaha®, Optimus® (SEASTAR®), Yanmar®. Note that for some of these systems, the helm can only be actuated when the engine is running.

What are the essential steps for installing and commissioning the NAC-D autopilot computer?

Commissioning the NAC-D autopilot computer involves several critical steps to ensure proper operation and optimal performance:

The units must be mounted and secured in accordance with the specific installation instructions.The network must be powered and wired as per the provided wiring instructions.Required data sources must be selected via the autopilot control unit documentation.The boat must be configured by entering its characteristics (type, length, cruising speed, etc.).The autopilot control units must be configured and calibrated.The compass must be accurately calibrated.A sea trial must be conducted (manually or using the Autotune function) to fine-tune the autopilot's performance.

What is the warranty duration for the Navico NAC-D autopilot computer?

The Navico NAC-D autopilot computer comes with a standard 2-year warranty from the date of purchase. This warranty covers manufacturing and material defects under normal operating conditions.

With which steering systems or engines is the NAC-D autopilot computer compatible?

The NAC-D autopilot computer is designed to be compatible with several marine steering systems and engines. It supports electronic steering systems from brands such as:

Volvo®, Yamaha®, Optimus® (SEASTAR®), Yanmar®. Please note that for some of these systems, the engine may need to be running to turn the wheel.