Cable adaptateur Raymarine A80559 sonde CPT-S/DVS vers Element HV

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Spara 7%

Raymarine

A80559

Aðlögunarlegur rafmagnskafli fyrir CPT-S/DVS mæli (9-stifts) og Element HV (15-stifts)

Le câble d'adaptation Raymarine A80559 permet de connecter une sonde CPT-S ou CPT-DVS (9-pin) aux écrans multifonctions Element HV (15-pin), assurant la compatibilité et la réutilisation de vos transducteurs existants. Il offre une solution économique pour les mises à niveau de systèmes de navigation. Le produit inclut uniquement le câble adaptateur.

Retail priceGet pro pricing

99,65€

99,65€ ~~108,00€~~

með skatti Sendingar reiknaðar við greiðslu.

Á lager

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Technical specifications

Tegund tengils	9 broches (sonde CPT-S/DVS) / 15 broches (Element HV)
Tegund keflis	Câble adaptateur
Samhæft net	Sonar CHIRP
Fasttengt net	Raymarine Sonar propriétaire
Virkjunarspenna	12V CC
Hitastig við notkun	-10 à +50°C
Hitastig við geymslu	-20 à +70°C
IP-stig	IPX7
Vottanir	CE
Gerð	Câble adaptateur
Samhæfð módel	Sondes Raymarine CPT-S/DVS (9 broches); Écrans multifonctions Raymarine Element HV (15 broches)

Detailed description

Raymarine A80559 aðlögunarlegur rafmagnskafli er hannaður til að tryggja samhæfni milli hefðbundinna CHIRP mæla CPT-S/DVS (9-stifts tenging) og fjölvirkra skjása Element HV seríunnar (15-stifts tenging). Þessi tæknilega lausn gerir notendum vörumerkisins kleift að endurnýta þá mæla sem þeir eiga þegar við uppfærslu á siglingakerfi sínu, og þar með hámarka fjárfestingu sína í búnað.

Tenging og samþætting Raymarine kerfa

Element HV serían frá Raymarine, þekkt fyrir HyperVision sonar getu sína, notar sérstaka 15-stifta mælatenginga. Á sama tíma nota CPT-S og CPT-DVS mælar, oft tengdir eldri kynslóðum af Dragonfly skjásum eða öðrum MFD Raymarine, 9-stifta tengingu. A80559 rafmagnskafli tengir þessi tvö tengingastöðlunarkerfi saman og gerir Element HV skjásunum kleift að túlka sonarmerki frá CPT-S/DVS mælum. CPT-S mælarnir, svo sem gegnir málmar eða plastmælar (E70339, A80446, E70340, A80447, E70341, A80448, A80545), eru þekktir fyrir styrk og áreiðanleika sína í sjávarútgerð.

Tæknilegt staðsetning og notendaforskot

Raymarine A80559 aðlögunarlegi rafmagnskafli er tæknilega staðsettur sem lykilhluti í samþættingu. Hann kemur í veg fyrir að þurfi að skipta út starfhæfum CPT-S/DVS mæli við kaup á Element HV skjá, og dregur þar með úr kostnaði og flækjum við uppsetningu (borun í ný holur í skrokk eða nýjar bakborðsfestingar). Meðan Element HV skjáar eru hannaðir fyrir HyperVision mæla (ekki innifaldir), gefur notkun CPT-S/DVS mæla með þessum rafmagnskafli áreiðanlega CHIRP sonar getu. Þessi nálgun er ólík heildarlausn með Element HV skjá og HyperVision mæli, en býður upp á hagkvæmari og skrefvísari uppfærslu leið, sérstaklega hentug fyrir siglingafólk sem vill varðveita hluta af núverandi búnaði sínum á meðan þeir njóta framfarir nýrra sýniskerfa.

Documentation

Type	Nom
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Declaration de conformite - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	FR - Notice d'installation - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)
	EN - Gabarit de montage - Câble d'adaptation sonde CPT-S/DVS (9-pin) sur Element HV (15-pin)

Expert review

Pol CONIN

Digital Manager

« Integration of CPT-S/DVS transducers with Raymarine Element HV displays »

The Raymarine A80559 adapter cable is a pragmatic solution for recreational boaters considering an upgrade to the Element HV series while retaining their existing CPT-S or CPT-DVS transducer. Its practical value lies in allowing the reuse of an expensive and often complex-to-replace component, such as a through-hull transducer, thereby avoiding additional hull work. It primarily targets boat owners equipped with Raymarine transducers from previous generations who do not wish to immediately invest in a new HyperVision transducer.

Installing this cable is straightforward: it is a plug-and-play connection between the 9-pin connector of the CPT-S/DVS transducer and the 15-pin port of the Element HV display. This significantly simplifies integration and reduces vessel downtime. This approach differs from a complete solution with a dedicated HyperVision transducer by offering an economical alternative. It is particularly relevant if the sonar capabilities of the CPT-S/DVS transducer are deemed sufficient for the user's primary needs, or if the budget does not allow for a full replacement.

It is crucial to understand the limitations of this adapter: it ensures physical and electrical compatibility but does not transform a CPT-S transducer into a HyperVision transducer. To fully leverage the 1.2 MHz frequencies and ultra-high-resolution imaging performance of HyperVision, a transducer dedicated to this technology is essential. The A80559 cable is therefore a functional bridge for traditional CHIRP technology, representing a transitional solution or a useful supplement rather than a replacement for the native capabilities of Element HV displays.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Aðlögunarlegur rafmagnskafli fyrir CPT-S/DVS mæli (9-stifts) og Element HV (15-stifts)

99,65€

99,65€ ~~108,00€~~

Complete your installation with

Complementary equipment

Raymarine

AIS 700 flokkur B með innbyggðum loftnetuskiptara

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Raymarine

Sýniblað i70s með fjölvirkni

Ref : E70327

678,00€

678,00€ ~~714,00€~~

Frequently asked questions

Need help? Contact us

What is the Raymarine A80559 adapter cable used for?

The Raymarine A80559 adapter cable is designed to connect traditional CHIRP transducers of the CPT-S and CPT-DVS types (equipped with a 9-pin connector) to Element HV series multifunction displays (which use a 15-pin connector). It allows you to reuse your existing transducer when upgrading your navigation system.

Which Raymarine transducers are compatible with this A80559 cable?

This cable is compatible with Raymarine transducers equipped with a 9-pin connector, specifically models in the CPT-S series (for traditional CHIRP sonar) and CPT-DVS series (for DownVision and SideVision sonar). This includes transducers such as the CPT-100, CPT-110, CPT-120, as well as CPT-S models with references E70339, A80446, E70340, A80447, E70341, A80448, and A80545.

Which Raymarine multifunction displays is this cable compatible with?

The A80559 adapter cable is specifically designed for use with Raymarine Element HV series multifunction displays, which feature a 15-pin transducer connector.

Does this cable allow me to use the HyperVision functions with my CPT-S/DVS transducer?

No, this adapter cable allows your Element HV display to use the CHIRP sonar signals from your CPT-S transducer or the DownVision/SideVision signals from your CPT-DVS transducer. The advanced HyperVision functions of Element HV displays require the use of specific HyperVision transducers, which are not included with this cable and are not supported by CPT-S/DVS transducers.

Is it difficult to install the A80559 adapter cable?

The A80559 adapter cable is designed for a simple and direct plug-and-play connection between your existing transducer and your new Element HV display. Simply connect the 9-pin end to your CPT-S/DVS transducer and the 15-pin end to your Element HV display. Installation of the cable itself does not require any specific tools, but access to the transducer and display connectors may vary depending on your boat's setup.

What is the advantage of using this adapter cable instead of buying a new transducer?

The main advantage of this cable is that it allows you to keep and reuse your existing Raymarine CPT-S or CPT-DVS transducer when purchasing an Element HV display. This represents a significant cost saving by avoiding the purchase of a new transducer and simplifies installation by eliminating the need to drill new holes in the hull or modify the transom mount for a new transducer.

Is this cable compatible with CPT-DV transducers or older DownVision/SideVision transducers (CPT-100/110/120)?

Yes, this cable is compatible with Raymarine CPT-DV transducers and older DownVision/SideVision transducers such as the CPT-100, CPT-110, and CPT-120. All of these transducers use a 9-pin connector, making them adaptable to Element HV displays (15-pin) via A80559 cable.