Pontfesting

Installing the Raymarine T004 deck bracket is designed for permanent mounting. Here are the main steps:

Choose a horizontal mounting surface. Drill the bracket base and secure it firmly to the boat using four non-magnetic screws. Ensure the screw size is appropriate to avoid damaging components beneath the mounting surface.Apply a sealant to the bracket to seal it to the boat, ensuring a perfect waterproof fit.Once installed, simply clip your Raymarine Micro Compass into the bracket before each sailing session.

To mount the T004 deck bracket, you must use four non-magnetic screws. It is essential to select a screw size suitable for your vessel to avoid damaging parts of the boat located beneath the mounting surface.

Yes, once the T004 deck cleat is drilled and screwed to the boat and the sealing process is completed, it becomes a permanent installation on the deck. The Raymarine Micro Compass can then be easily clipped and unclipped from this cleat.

For the compass to maintain its accuracy, it must be mounted with a maximum tilt of 20° relative to vertical. There must be no heel to port or starboard. Compliance with this requirement is crucial for reliable readings.

Yes, to avoid any magnetic interference that could affect your compass accuracy, the T004 bracket must not be installed within 0.6 meters (2 feet) of magnetic objects. This includes a conventional compass, which is itself a magnetic object.

The T004 deck bracket is a dedicated accessory and is specifically designed for the Raymarine Micro Compass. It provides an optimal fixed mounting solution for this compass model.

The T004 deck cleat package contains the T004 deck cleat itself. Mounting screws and sealant are not included and must be purchased separately.

The T004 deck bracket is designed to be mounted on a horizontal surface. It is essential to choose a stable and flat location on your boat's deck to ensure correct installation and compass accuracy.