Rafmagnskafli SeaTalk NG 90° 2 metrar

The Raymarine SeaTalk NG cable A06070 is a 2-meter power cable designed to inject electrical power into a SeaTalk NG network. It is essential for powering compatible instruments and displays connected to this interconnect bus.

This Raymarine SeaTalk NG power cable (reference A06070) is 2 meters long.

The 90-degree (right-angle) connector on this cable is an advantage for installations where space behind devices or connection points is limited. It allows for cleaner cable routing and reduces mechanical stress on connectors, making integration into dashboards or tight technical compartments easier.

SeaTalk NG power cables, including model A06070, are easily identifiable by a red stripe. In accordance with SeaTalk NG color codes, blue is used for the backbone and white for spur cables.

The A06070 cable is a power cable. It is designed to supply electrical power to the SeaTalk NG network, whether directly on the backbone or on a spur. It is not inherently a backbone or spur data cable, but a dedicated power cable.

No, the SeaTalk NG power cable A06070 is not supplied with terminators. Terminators are separate and essential components for proper SeaTalk NG network operation and must be purchased separately if you do not already own them.

This power cable is compatible with all Raymarine products and systems that use the SeaTalk NG network. It powers instruments, multifunction displays, and other SeaTalk NG-compatible devices.

Raymarine's SeaTalk NG system is similar to the NMEA 2000 standard. However, to connect NMEA 2000 devices to a SeaTalk NG network, specific adapter cables are required. The A06070 cable is a SeaTalk NG power cable and cannot be used to directly interconnect NMEA 2000 devices without an adapter.

The A06070 cable is designed for the SeaTalk NG system. To connect SeaTalk(1) products to SeaTalk NG systems, Raymarine-specific products (such as certain ST70 instruments) or adapter cables are required. This power cable does not allow direct connection to SeaTalk(1) systems.

The SeaTalk NG system is Raymarine's proprietary interconnect bus. Although it is based on the NMEA 2000 standard, this power cable is specifically designed for Raymarine's SeaTalk NG networks and is not directly compatible with equipment from other brands without a specific adapter or converter.

This power cable can be connected to any available point on the SeaTalk NG network, whether on a backbone connector or on a spur. For larger systems, it is recommended to position the power source in a balanced manner to ensure optimal power distribution.

Before any installation, it is imperative to cut the electrical power to the system to avoid any risk. Additionally, it is recommended to follow Raymarine's EMC (Electromagnetic Compatibility) installation guidelines to ensure optimal performance and avoid interference.

The 90° connector allows the cable to be plugged into tight spaces or behind equipment without the cable protruding excessively. This ensures a cleaner installation, reduces stress on the connector, and prevents sharp bends in the cable that could damage it over time.

Raymarine offers a wide range of SeaTalk NG cables in various lengths. To extend the power supply range, it is recommended to use a longer power cable or add another power source to the backbone rather than attempting to extend or cut this cable, as this could compromise its integrity and the system's reliability.

Yes, this cable can be used to power a SeaTalk NG network, even if it only has a single device. The purpose is to inject power into the SeaTalk NG bus to which the device is connected. However, it is important to note that even for a single device, the SeaTalk NG network requires terminators at both ends of its backbone to function properly.

SeaTalk NG is Raymarine's proprietary interconnection bus, designed to link its marine products. It is based on the NMEA 2000 standard and uses a similar architecture with a backbone and spur cables. This means it shares many technical characteristics with NMEA 2000 but requires specific Raymarine cables and connectors.

The SeaTalk NG system enables interconnection and communication between Raymarine instruments and displays aboard a boat. It forms a robust network that transmits data (GPS, depth sounder, wind, radar, etc.) and electrical power, simplifying wiring and equipment integration.

Yes, like all Raymarine equipment, this cable is designed for use in recreational marine environments. It is manufactured with materials resistant to corrosion and the harsh conditions typical of boats, ensuring reliable and durable connectivity.

For a functional SeaTalk NG network, in addition to the A06070 power cable, you will need:

A backbone made of blue SeaTalk NG cables. SeaTalk NG terminators, one at each end of the backbone. T-connectors or connection blocks to link devices. White spur cables to connect devices to the backbone. Raymarine devices compatible with SeaTalk NG.