Sýnirinn i50 Depth fyrir dýptarmælingar

The Raymarine i50 Depth display is a navigation instrument specifically designed to accurately show seabed depth. It is ideal for safe navigation, particularly in areas with high tidal ranges or shallow waters.

The display has compact dimensions of 110 x 115 x 44 mm (width x height x depth). Its design allows for perfect flush mounting on the console or dashboard of your boat.

Yes, this instrument is designed for harsh marine environments. It features IPX6 waterproofing, providing effective protection against breaking waves and heavy water spray.

Absolutely. The screen features very large digits and offers excellent viewing angles (+70° / -70°), ensuring perfect readability both day and night, even when offset from the instrument.

The display manages several essential sound and visual alarms for safety: a shallow-water alarm (minimum depth) and a maximum depth alarm. You can adjust the thresholds according to your sailing needs.

Yes, you can configure the measurement unit to your preference during user calibration. The display allows depth to be shown in metres (m), feet (ft) or fathoms (fa).

Yes, it features adjustable backlighting. Additionally, if connected to a SeaTalk NG network, it can participate in group illumination, allowing you to synchronize the backlighting level of all your compatible Raymarine instruments.

No, the reference E70059 corresponds to the i50 Depth display sold separately (without a transducer). If you do not have an existing depth sounder, you will need to purchase a compatible depth sounder separately or choose a complete pack.

The i50 Depth is dedicated solely to displaying depth. The i50 Tridata, on the other hand, combines depth, speed (log), and water temperature data on a single screen divided into three zones.

Installation is done by flush-mounting. A mounting template is provided to precisely cut your console. The screen is then secured from the front, and the bezel (lens) clips on top for a clean finish.

The instrument operates on a 12 V DC electrical system. Its acceptable operating voltage range is from 10 V to 16 V DC.

The device is powered directly via the SeaTalk NG network. Simply supply a 12V power source to the main SeaTalk NG backbone, which will then distribute power to the display through its spur cable.

Yes, it is mandatory to protect the installation. The SeaTalk NG network power cable must be connected to the 12V battery via a 5 amp inline fuse or an equivalent thermal circuit breaker.

The i50 Depth display has a dedicated rear connection (crimp-type terminals) for direct connection of compatible Raymarine or Airmar analog depth sounder transducers.

Yes, the display is fully compatible with the NMEA2000 protocol via Raymarine's SeaTalk NG connectivity. It can share depth data with your chartplotters and other NMEA2000 devices.

Yes. The i50 Depth is designed to be backward-compatible with the old SeaTalk 1 standard. It has the necessary connectors to integrate easily into a legacy instrument network (such as the ST60 series).

The display is compatible with many analog transducers from Raymarine and Airmar, such as models P17, P319, P79 (In-hull), B17, B45, or P66. You can use through-hull, glue-on, or transom-mount transducers.

Yes. If the depth sounder transducer is connected to another instrument or a sounder module on the network, the i50 Depth will automatically configure itself in Repeater mode to display data received via SeaTalk NG or SeaTalk 1 network.

Only a clean, damp cloth should be used to wipe the screen. Never use abrasive, acidic, ammonia-based, or solvent products, as they may damage the screen treatment and compromise waterproofing.