Capteur Trifonctions Sondeur/Loch et Température

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Spara 13%

Raymarine

T910

Þrívirkur nemi – Dýptarmælir, hraðamælir og hitamælir

Le Raymarine T910 est un émetteur de coque conçu pour traiter les données de profondeur, vitesse et température d'un triducer, s'intégrant au système 12/24Vdc du bateau. Cette unité est essentielle pour centraliser et transmettre ces informations de navigation. Inclus : vis auto-foreuses et gabarit de montage.

Retail priceGet pro pricing

217,46€

217,46€ ~~252,00€~~

með skatti Sendingar reiknaðar við greiðslu.

Á lager

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Technical specifications

Virkjunarspenna	12/24 V
Breidd varahlutar	47 mm
Hæð vörunnar	52.5 mm
Dýpt vörunnar	42.5
Samhæfni við gagnabraut	NMEA 2000
Fasttengt net	NMEA 2000
Gerð festingar	Montage en surface
Sjálfstýrður ventill	Non
Innsetning	Non
Staðsetning uppsetningar	Intérieur, au-dessus de la ligne de flottaison, ventilé
Stilling á hraða báts	Via système de navigation connecté
Hitastigsmæling	Oui
Tegund úttaks nema	Numérique (NMEA 2000)
Tegund nema	Interface de capteur multifonction

Detailed description

Raymarine T910 er skrokkastali sem hannaður er til að taka við gögnum frá þrívirkum nemi (triducer) sem mælir dýpt, hraða og hitastig. Þessi eining starfar sem milliliður milli triducersins og siglingakerfis skipsins og sameinar þessi þrjú nauðsynleg gögn fyrir nákvæma eftirlitshöndlun. Hún er samhæfð 12/24V dc raflögn skipsins og getur einnig verið knúin með Raymarine sólarskildi ef ekki er til sérstök raforkugjöf.

Uppsetning og tengingar T910

Uppsetning á Raymarine T910 krefst val á réttum stað um borð. Einingin skal vera sett upp lóðrétt með kablunum út um neðri hluta og verður að vera að minnsta kosti 50 cm fyrir ofan flotlínu. Mikilvægt er að forðast beint vatnsviðnám og velja vel loftræst svæði, og útiloka þétt loftrými með einangrun. Uppsetning fer fram með þremur 2,5 mm holum, með sjálfskerandi skrúfum sem fylgja, og skal gæta þess að ekki sé of fast dregið til að forðast skemmd á húsinu.

Upplýsingar um rafmagn og tengingar

Tenging rafeindakabla frá dýptarmæli við Raymarine T910 skal fara eftir ákveðinni litakóðun. Fyrir triducer skal skjöldurinn (screen) tengdur við tengingu fyrir dýpt og ekki fyrir hraða til að forðast skammhlaup. Ef hraðamælirinn hefur ekki innbyggðan hitamæli, skal tengja brúnar og hvítar leiður við tengingu fyrir hraða til að tryggja samfellu merkingarinnar. Það er mælt með að smyrja tengingar með kísilsmurningu til að bæta tengingu og styðja við kablana nálægt stöðunni. Lokhlífin skal vera rétt sett til að halda utan um kabelhlífar inni í stöðunni og tryggja viðeigandi vernd fyrir öllum rafmagnsköblum.

Documentation

Type	Nom
	EN - Gabarit de montage - Capteur Trifonctions Sondeur/Loch et Température
	EN - Notice d'installation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température
	EN - Manuel d'utilisation - Capteur Trifonctions Sondeur/Loch et Température

Expert review

Pol CONIN

Digital Manager

« Raymarine T910 interface: reliable management of triducer data »

The Raymarine T910 is a hull-mounted transmitter essential for vessels requiring reliable centralization of core navigation data: depth, speed, and temperature. This module is not the sensor itself, but the electronic interface that receives and processes signals from an external triducer. Its practical value lies in converting raw sensor data into usable information for the onboard electronics system, often for integration into an NMEA or SeaTalkNG network; the NMEA output protocol is specifically mentioned in the technical documentation.

Installing the T910 requires consideration. As a hull-mounted transmitter, it is installed inside the vessel, simplifying maintenance and avoiding additional hull penetrations compared to a through-hull transducer. However, this imposes specific constraints: vertical mounting, more than 50 cm above the waterline, and in a ventilated space away from direct moisture. These requirements are critical to ensure longevity and signal reliability. Installers must pay close attention to transducer wiring, particularly grounding the shield to the depth connector for triducers, and bridging the brown and white terminals if the speed sensor does not include a temperature probe. These details are decisive for proper operation and system integrity.

This type of interface is particularly relevant for owners looking to modernize or enhance the reliability of their navigation data acquisition without replacing all sensors. It serves as a key component for converting and transmitting basic data, often a prerequisite for display on multifunction instruments or dedicated screens. It is not suitable for direct exposure to the elements or installation in hermetically sealed compartments that would prevent necessary ventilation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Þrívirkur nemi – Dýptarmælir, hraðamælir og hitamælir

217,46€

217,46€ ~~252,00€~~

Frequently asked questions

Need help? Contact us

What are the prerequisites for drilling the mounting holes of the T910?

You must drill three 2.5 mm holes. These holes are marked "B" on the mounting template provided with the unit.

Which screws to use to mount the T910 and are there any precautions?

The T910 must be mounted using the supplied self-tapping screws. It is critical not to overtighten the screws, as this could damage the housing molding.

How to connect the transducer cables to the Raymarine T910?

Connecting the transducer cables to the Raymarine T910 must follow the specific color code indicated on the unit. It is also necessary to shield the cables to prevent short circuits.

How to connect the ground braid of a triducer to the T910?

For a triducer, the ground braid MUST be connected to the depth connector, not the speed connector. This prevents short circuits and ensures proper operation.

What to do if my speed sensor has no built-in temperature probe?

If your speed sensor does not include a temperature probe, you must connect the brown and white terminals of the speed connector. This connection ensures signal continuity.

Should a product be applied to the T910 connection terminals?

Yes, it is recommended to apply silicone grease to the connection terminals to optimize connection quality and protect it.

How to ensure proper cable management after connection to the T910?

It is recommended to support the cables near the transmitter. Additionally, the unit's cover must be correctly positioned to keep the outer cable sheaths inside the transmitter, ensuring their secure attachment and protection.

How to check that the T910 cover is correctly installed?

Ensure the cover is properly seated and that it secures the outer cable sleeves inside the transmitter housing. This ensures connection protection and installation durability.

Is the T910 compatible with all types of transducers?

The Raymarine T910 is specifically designed to be used with a triducer (triple-function transducer) measuring depth, speed, and temperature. Its compatibility will therefore depend on the type of triducer you have.

Can the T910 be used with older transducers?

Yes, the T910 can potentially be used with older transducers. However, it is advisable to carefully check the connections, especially if the speed sensor does not have an integrated temperature probe, in which case a link between the brown and white terminals of the speed connector will be required.

What types of data can the T910 process?

The T910 is designed to process and interface depth, speed (log), and temperature data. These three types of measurements are consolidated by the unit for your navigation system.

Can incorrect installation of the T910 affect the warranty?

Yes, failure to follow the installation instructions provided with the Raymarine T910 may void your warranty. It is therefore essential to strictly adhere to all guidelines for installation and wiring.