Tenging 10 metrar fyrir RayMic-samsett VHF Ray 63, 73 & 90

This 10-metre extension cable increases the distance between your main VHF radio and its remote RayMic handset. It is ideal for installing a second communication station on a flybridge, at a secondary chart table, or in the cockpit.

This cable is exactly 10 meters long, providing ample flexibility for routing through bulkheads and decks on your boat.

This extension is exclusively compatible with RayMic handsets designed for Raymarine VHF radios Ray63, Ray73, and Ray90.

Yes, this is an original Raymarine part (reference A80292). Using official accessories ensures proper operation, safety, and reliability of your communication system.

Yes, the connectors on this extension cable are specifically designed for marine environments. They provide a secure and watertight connection, which is essential for outdoor use.

No, as an original certified cable, this extension ensures perfect signal transmission. You will experience no audio quality loss or interference compared to a direct connection.

No, the connectors and wiring are proprietary. This cable is designed for Raymarine VHF systems only (Ray63, Ray73, and Ray90 series).

Cutting or modifying this cable is strongly discouraged. It would destroy the specific connectors, compromise waterproofing, and risk creating interference on your VHF network.

Installation is very simple. Just screw the waterproof connectors of the extension between the dedicated port of your VHF base and the cable of your RayMic handset. It's a plug-and-play system.

No specific tools are required for the connection itself. The connectors are hand-tightened to ensure watertightness. You will only need your usual tools for running the cable through your boat.

It is generally recommended to respect the maximum lengths recommended by Raymarine to avoid any signal loss. Consult your VHF manual before chaining multiple extension cables.

No, this is an extension cable that connects between the VHF base unit and the connection point of your handset. The RayMic handset retains its own coiled cable for daily use.

Yes, the cable is designed to be routed through bulkheads. However, care must be taken not to damage the connectors when passing through tight spaces or through-hull fittings.

The extension cable weighs approximately 0.688 kg, reflecting the quality of its shielding and its robust design to withstand the marine environment.

No, reference A80292 is specifically designed for Raymarine's new VHF generation. It is only compatible with Ray63, Ray73, and Ray90 models.

A standard cable will not withstand the marine environment (salt, humidity, UV) and will lack the necessary shielding to prevent radio interference. Additionally, Raymarine connectors are specific to the brand's equipment.

Yes, the cable transmits both the electrical power, control data, and audio signal required for the full operation of your remote display unit.

When running the cable through bulkheads, it is advisable to wrap connectors with adhesive tape to prevent dust from entering and to avoid damaging the threading during friction.

The connection port for the secondary handset is usually located at the back of your Ray63, Ray73 or Ray90 VHF base station, or on a dedicated cable harness. Check your radio’s wiring diagram to identify it.

Absolutely. Whether to connect the chartplotter to the cockpit on a sailboat, or the interior helm to the flybridge on a powerboat, this extension fits all types of vessels requiring a remote station.