Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Spara 4%

Raymarine

E70340

Þversgengin bronsasond með 12° keilubeiðni HIGH CHIRP CPT-S, 10 m rafmagnskafli

La sonde bronze traversante RAYMARINE E70340 CPT-S offre une détection sous-marine précise grâce à son faisceau conique HIGH CHIRP de 12°. Conçue pour une durabilité accrue en milieu marin, elle est idéale pour les MFD Raymarine compatibles nécessitant un sonar traditionnel performant. La sonde est fournie avec un câble de 10m intégré.

Horni: 12 degrees

0 degree 12 degrees 20 degrees

Retail priceGet pro pricing

308,58€

308,58€ ~~324,00€~~

með skatti Sendingar reiknaðar við greiðslu.

Á lager

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Technical specifications

Tæknar í botnvörpum sem styðjast við	CHIRP Haute Fréquence
Tíðni sonar	170-230
Hitastig við notkun	-10 à +50
Hámarksdýptarkvarði	274.0
Efni mælisnefils	Bronze
Tegund tenginga fyrir sonar	Raymarine CPT-S
Lengd rafleiðara	10.0
Samhæfir skjáar	Raymarine Axiom, Element, Dragonfly (avec adaptateur si nécessaire)
Dýpt vörunnar	100
IP-stig	IPX6/IPX7
Þráðlaus tenging	Non
Gerð festingar	Traversante
Vottanir	2013/53/EU,EN ISO 8846:2017
Geislasvæði	25
CHIRP tíðni (hár)	170-230
Innbyggður hraðaskynjari	Non
Útgáfuár	2017.0
Ábyrgð	2.0

Detailed description

RAYMARINE E70340 þversgengin bronsasond er undirvatnsnemi fyrir CHIRP sonarakerfi. Þetta CPT-S módel er þversgengin sond úr bronsi með 12° keilubeiðni HIGH CHIRP sem jafnar út V-lögun skrokkarins. Hún fylgir með 10 metra innbyggðum rafmagnskafli sem auðveldar uppsetningu á mismunandi skipum.

Nákvæm CHIRP sonar tækni

Þessi sond er hluti af Raymarine CPT-S línunni og notar HIGH CHIRP tækni til að veita nákvæmar sonarútsendingar og betri aðgreiningu marka. Öfugt við DownVision kerfin sem veita ljósmyndalegar myndir af botninum, er þessi sond með hefðbundna keilubeiðni sem er hönnuð fyrir veiðar og nákvæma botnvörpun í mismunandi dýpi. Bronsuppbyggingin gerir hana endingarbetri en plasteinkennar (svo sem A80447 fyrir sömu 12° keilubeiðni), sérstaklega hentug fyrir erfiðar hafar og skrokka úr viði eða trefjaplasti.

Uppsetning og samræmi

E70340 sondin er ætluð fyrir þversgengna uppsetningu sem krefst holu í skrokk. 12° hornið er valið fyrir skrokka með meðal deadrise til að tryggja að sonarkeilan sé beint niður á botn. Það er óheimilt að skera rafmagnskafil sondarinnar því það myndi verulega minnka árangur sonarins, ógilda trygginguna og ógilda CE merkið. Þetta vörumerki er í samræmi við samræmdar staðla 2013/53/EU og EN ISO 8846:2017, sem tryggir áreiðanleika og öryggi fyrir hafarnotkun. Til að tryggja bestu árangur skal sondin eingöngu nota í vatni til að forðast ofhitnun.

Documentation

Type	Nom
	EN - Plan technique - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Declaration de conformite - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	EN - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble
	FR - Notice d'installation - Sonde bronze traversante à faisceau conique HIGH CHIRP angle 12° CPT-S, 10m câble

Expert review

Pol CONIN

Digital Manager

« Technical analysis of the Raymarine CPT-S bronze 12° CHIRP transducer »

The Raymarine CPT-S E70340 transducer is a sound technical choice for recreational boaters and anglers seeking a reliable and robust CHIRP sonar solution. Unlike RealVision 3D multi-element sensors that provide sophisticated imaging, this model focuses on the performance of a dedicated HIGH CHIRP conical beam. Its bronze construction is a major durability asset, outperforming plastic versions in harsh marine environments, particularly for boats kept afloat year-round or in saltwater. It is particularly well-suited to wooden or fiberglass hulls, where a through-hull installation is preferred to avoid turbulence.

The 12° beam angle of the transducer is specifically designed to compensate for the deadrise of hulls with moderate angles, ensuring the sonar beam is perpendicular to the seabed for optimal readings. It is essential to verify the compatibility of this angle with your hull design before installation to avoid beam tilt that would degrade performance. Although the CPT-S series is an earlier generation compared to the newer RealVision systems, it remains relevant for compatible Raymarine MFDs (such as Dragonfly models or certain A, eS, gS series) requiring a traditional CHIRP sonar for precise fish detection and bathymetry.

A through-hull installation, while more complex than a transom-mount setup, offers superior hydrodynamic performance and better transducer protection. It requires careful attention to hull drilling and watertight sealing to maintain vessel integrity. This transducer does not provide DownVision or SideVision imaging, so it should be prioritized if your primary need is a high-performance traditional CHIRP sonar without advanced imaging features, or if you are complementing an existing system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Þversgengin bronsasond með 12° keilubeiðni HIGH CHIRP CPT-S, 10 m rafmagnskafli

308,58€

308,58€ ~~324,00€~~

Complete your installation with

Complementary equipment

Raymarine

AIS 700 flokkur B með innbyggðum loftnetuskiptara

Ref : E70476

1.305,60€

1.305,60€ ~~1.434,00€~~

Frequently asked questions

Need help? Contact us

What is HIGH CHIRP technology and what is the purpose of the cone beam of this fishfinder?

The HIGH CHIRP technology used by this Raymarine CPT-S fishfinder provides highly detailed sonar returns and improved target separation underwater. Unlike DownVision imaging systems, the traditional cone beam of this fishfinder is optimized for precise fish detection and seabed tracking at various depths.

Why does this thru-hull transducer have a 12° angle?

The 12° angle of this transducer is specifically designed to compensate for the deadrise of your vessel's hull. This ensures the sonar beam is directed vertically toward the seabed, providing optimal performance and accurate readings, particularly for hulls with moderate deadrise.

What type of installation is required for this Raymarine transducer?

This transducer is a through-hull model, meaning it requires drilling the hull of your boat for installation. Raymarine recommends installation by a certified installer to ensure proper implementation and to benefit from the enhanced warranty.

Can I cut the depth sounder cable if its 10-metre length is excessive for my boat?

No, it is essential not to cut the depth sounder cable. Trimming the cable will significantly reduce the fishfinder’s performance, void the product warranty, and invalidate the European CE mark. If the cable is cut, it cannot be repaired and must be replaced.

Which Raymarine devices is this CPT-S transducer compatible with?

This CPT-S transducer is designed to be compatible with Raymarine CHIRP fishfinder systems. It typically works with Raymarine multifunction displays (MFDs) from the Axiom and Element series, as well as certain Dragonfly models that support CPT-S conical beam transducers.

Why is this transducer made of bronze rather than plastic?

This transducer is made of bronze to provide increased durability, particularly suited to demanding marine environments. Bronze is a more robust option than plastic and is recommended for fiberglass or wood hulls, ensuring better longevity and resistance to the elements.

How should I maintain and clean my depth sounder to ensure its performance?

To maintain your depth sounder’s performance, follow these recommendations:

Apply a thin coat of water-based antifouling paint to the transducer to prevent marine growth buildup. Reapply every 6 months or at the start of each season.
Clean the transducer with a soft cloth and mild household detergent.
For stubborn grime, use a scouring pad such as a Scotch Brite™ pad, ensuring the transducer face is not scratched.
Warning: Never use ketone-based paint, spray paint, or harsh cleaning solvents like acetone, as they will damage the transducer.

Which compliance standards does this Raymarine transducer meet?

This Raymarine E70340 transducer complies with European harmonised standards. It meets Directive 2013/53/EU for marine equipment and EN ISO 8846:2017, ensuring reliability and safety for marine use.