Passa-brú fyrir tengla upp að Ø40 mm, rafmagnskafli 12-15 mm - svartur samsetningarplast

This Scanstrut DS40-P-BLK deck gland is designed to accommodate connectors up to 40 mm in diameter.

This deck gland is specifically suitable for cables with a diameter between 12 and 15 mm.

The Scanstrut DS40-P-BLK deck gland is made of black composite, providing good resistance in marine environments while remaining lightweight.

For the installation of this deck gland, you will need the following tools:

A Pozidriv screwdriverSilicone sealantA hole saw with Ø40 mm diameterA drill bit of Ø2.5 mm or Ø3 mm (depending on the hardness of your mounting surface)

The DS40-P-BLK is the black composite (plastic) version, which is a lightweight and economical alternative. The DS40-S, on the other hand, is the version made of stainless steel, offering different robustness and finish.

The main difference lies in their capacity and drilling size. The DS40 is designed for connectors up to Ø40 mm and cables from 12-15 mm, requiring a Ø40 mm hole. The DS30 is suitable for cables from 9-14 mm and requires a Ø30 mm hole.

Four No. 6X16 self-tapping screws are included in the kit for securing the deck fitting to your mount.

Yes, applying silicone is essential to ensure a perfect seal around the drilled hole and under the deck gland base, thus protecting the interior of your vessel from water.

The drill bit diameter for pilot holes depends on the material of your support:

For soft materials (e.g., plywood): use a 2.5 mm (3/32 inch) drill bit.

For hard materials (e.g., fiberglass, acrylic, hardwood): use a 3 mm (1/8 inch) drill bit.

Yes, the Scanstrut DS40-P-BLK deck gland is a waterproof cable gland designed to provide reliable water protection for cable penetrations on boat decks.

Yes, this deck gland is designed for vertical installation, making it ideal for cable runs through decks or vertical bulkheads on your vessel.

The M4X10 black bolt is a key component for assembling the bridge deck, securing the hull to the base and ensuring the assembly's structural integrity.

Yes, the Scanstrut DS40-P-BLK is a marine-grade product designed specifically to withstand the demanding conditions of marine environments, thanks to its black composite construction.

To ensure optimal sealing, it is imperative to apply marine-grade silicone around the drilled hole and under the deck-mount base before securing it with the provided screws. Ensure all surfaces are clean and dry before application.

Yes, the Scanstrut DS40-P-BLK deck gland is delivered with detailed installation instructions to guide you step-by-step through the assembly process.

This deck gland is optimized for cables with a diameter of 12 to 15 mm. For cables with a smaller diameter, it would be more appropriate to consider a different Scanstrut model, such as the DS30, which is designed for cables of 9-14 mm, to ensure optimal sealing and compatibility.