Blue Smart IP65 Hleðslutæki 12/10

The Victron Energy Blue Smart IP65 12/10 is a professional 12V battery charger with a 10A charge current. It is water-, dust-, and chemical-resistant (IP65 rating). It features a seven-stage smart charging algorithm, a deep-discharge battery recovery function, an automatic power supply mode, and a Li-ion battery mode. It can operate in extreme cold conditions down to -30°C.

The Blue Smart IP65 12/10 charger delivers very high energy efficiency, up to 95%. Once the battery is fully charged, its standby power consumption drops to just 0.5 Watts, which is significantly lower than the industry average.

Yes, the Victron Blue Smart IP65 12/10 charger is completely silent. Its design has no cooling fan or any other moving parts, ensuring quiet and noise-free operation.

The seven-step smart charging algorithm ensures optimal charging for different battery types. It includes essential phases such as bulk charging, absorption, equalization mode (if selected), float mode, and storage mode, guaranteeing a full charge, effective maintenance, and extending battery lifespan.

Yes, the Blue Smart IP65 12/10 charger is equipped with a recovery function for fully discharged batteries. It will attempt to recharge a battery that is at zero or near-zero volts using a low current, then resume normal charging once sufficient voltage is established at the battery terminals.

The Blue Smart IP65 12/10 charger features an automatic power mode. This means it can be used as a stabilized power supply to provide a constant voltage, which is useful for powering 12V devices directly or for maintaining a stable voltage during vehicle maintenance without a battery.

Yes, the charger is protected against overheating. If the ambient temperature rises to 60°C, the output current will be automatically reduced to prevent damage, but the charger will continue to operate without failure.

The Blue Smart IP65 12/10 charger has dimensions of 60 x 105 x 190 mm (height x width x depth) and weighs 0.9 kg.

Yes, with its IP65 rating, the charger is resistant to splashes, dust, and chemicals, making it ideal for demanding environments such as marine or outdoor settings. It can operate from -40°C to +60°C, delivering full power up to 30°C.

The charger is supplied with battery connection cables (black and red) 1.5 metres long and a 230V AC mains connection cable also 1.5 metres long.

The Victron Blue Smart IP65 12/10 charger is compatible with all 12V battery types, including lead-acid, AGM, Gel, and Li-ion (LiFePO₄) batteries.

For the Blue Smart IP65 12/10 charger, the recommended battery capacity is 30 to 100 Ah (Ampere-hours) for optimal and efficient charging.

Yes, the charger is designed for use in various applications. Its robustness, water and dust resistance (IP65) make it perfectly suited for charging batteries in land and marine vehicles.

No, the Blue Smart IP65 Charger 12/10 model is specifically designed for 12V battery systems. For 6V or 24V batteries, you would need to choose another Victron Energy Blue Smart IP65 model suited to these voltages.

Yes, the charger is compatible with the VictronConnect app via Bluetooth for monitoring and configuration. For physical connections, it comes with clamps and the product name mentions a DC connector. Optional accessories such as M8 eyelets or fuse clamps are available for permanent or specific connections.

To connect the charger, follow these steps:

Start by connecting the clamps (or eyelets) to the battery, respecting polarity: the red clamp to the positive terminal (+) and the black clamp to the negative terminal (-). Next, plug the power cable into a wall outlet. The charger will automatically detect the voltage and polarity, and the status LEDs will flash in case of incorrect connection.

It is crucial to read the instruction manual for all safety precautions. Here are some important points:

Ensure the area around the battery is well-ventilated.Avoid any sparks or flames near the battery.Never drop a metal tool on the battery, as this could cause a short circuit or explosion.The charger is protected against reverse polarity, but it is still recommended to check the connection before plugging it into the power outlet.

Yes, the charger is designed to be left permanently connected thanks to its adaptive storage mode. This mode reduces the charging voltage after 48 hours of inactivity to minimize positive plate corrosion and thus extend battery life.

You can easily configure and monitor the charger via the VictronConnect app, available for iOS and Android smartphones and tablets. Connection is made via Bluetooth Smart, allowing you to view battery status, voltage, current, and adjust charger settings directly from your mobile device.

For any questions or support needs regarding your Victron Energy charger, we recommend contacting the customer service of the dealer from whom you purchased the product. You can also consult Victron Energy's website to access technical documentation, user manuals, and support resources.