EasySolar 24/1600/40-16 MPPT

The Victron Energy EasySolar 24/1600/40-16 MPPT 100/50 is an all-in-one solar energy solution. It integrates an MPPT solar charge controller, a MultiPlus Compact inverter/charger, and AC distribution in a single enclosure, simplifying installation and minimizing wiring.

This EasySolar model is designed for DC systems with a nominal voltage of 24V.

The integrated inverter delivers a continuous output power of 1600VA / 1300W at 25°C and 1200W at 40°C.

The Victron EasySolar 24/1600/40-16 MPPT 100/50 inverter can reach a peak power of 3000W.

The MultiPlus Compact's built-in battery charger delivers a maximum charging current of 40A for the service battery.

The EasySolar integrates a 100/50 MPPT solar charge controller. This controller uses an ultra-fast MPPT algorithm to optimize solar energy harvesting.

The MPPT 100/50 solar charge controller can handle a maximum PV power of 1400W for 24V systems.

The maximum PV open-circuit voltage that the MPPT 100/50 solar charge controller can handle is 100V.

Up to three PV panel strings can be connected to the EasySolar, via three PV MC4 (PV-ST01) PV connector sets.

The AC distribution is integrated and consists of a 30 mA/16 A residual current device (RCD) and four AC outputs protected by two 10 A circuit breakers and two 16 A circuit breakers. One 16 A output is controlled by the AC input and activates only when AC power is available.

The PowerAssist technology protects the power supply of the grid or generator from overloads. It adds inverter power as needed, thereby supplementing the capacity of the alternative source when power demand is high.

In the event of an AC power failure, the EasySolar's no-break function ensures automatic transfer in less than 20 milliseconds, guaranteeing uninterrupted power supply to connected equipment.

Yes, the MultiPlus Compact battery charger features a 4-stage adaptive battery management system (bulk – absorption – float – storage) controlled by a microprocessor. It can be pre-set to adapt to different battery types and automatically optimizes the charging process based on battery usage.

Yes, the EasySolar comes with a battery temperature sensor. When connected, the charge voltage automatically decreases as the battery temperature rises, which is particularly recommended for sealed batteries or in cases of large temperature fluctuations.

The EasySolar can operate in a temperature range from -20 to +50°C. It features fan-assisted cooling.

The inverter achieves a maximum efficiency of 94%, while the MPPT solar charge controller exceeds 98% maximum efficiency.

The dimensions of the EasySolar are 745 x 214 x 110mm (height x width x depth). Its weight is 15kg.

Yes, several software programs (Assistants) are available to configure the system for various interactive applications with the network or standalone, offering great flexibility of use.

The EasySolar includes several electronic protections:

Short-circuit protection on outputOverload protectionProtection against battery voltage too high or too lowProtection against excessive temperaturesProtection against 230 VAC on the inverter outputProtection against excessive input voltage rippleProtection against PV short-circuits and PV polarity reversalProtection against reverse PV current

Yes, remote control of the EasySolar is possible. You can use a 3-position switch or a Digital Multi Control panel to manage its functions.