Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Spara 24%

Victron Energy

LYN034160200

Lynx Smart BMS 500 (M8)

The Lynx Smart BMS 500 (M8) is the most comprehensive BMS in the Victron Energy lithium Smart battery range. It includes a 500 A contactor, a battery monitor (shunt), a pre-charge circuit, and offers advanced monitoring via VictronConnect or GX device, with VE.Can/NMEA 2000 communication. This 500 A (M8) model is supplied with two VE.Can RJ45 terminators.

Retail priceGet pro pricing

871,43€

871,43€ ~~1.161,60€~~

með skatti Sendingar reiknaðar við greiðslu.

Á lager

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Technical specifications

Sæmilegt fyrir VE.Can	Oui
Max alarm relay current	2
Alarm relay type	SPDT
Allow To Charge Port Max Current Rating	0.5
Allow To Discharge Port Max Current Rating	0.5
Hámarks straumur útgangs AUX	1.1
Busbar Terminal Size	M10
Main Safety Contactor Continuous Current Rating	500
Main Safety Contactor Peak Current Rating	600
Main Safety Contactor Peak Current Rating Duration	5
Max Batteries Per Bms	20
Max Parallel Units	5
Max System Energy Kwh 12v	84
Max System Energy Kwh 24 48v	102
Minimum Load Resistance Pre Charging 12v	10
Minimum Load Resistance Pre Charging 24 48v	20
Pre Charge Circuit Integrated	Oui
Supported System Voltages	12V,24V,48V
Fasttengd inntak	RJ45
Fasttengt úttak	RJ45
Þráðlaus tenging	Bluetooth

Detailed description

Lynx Smart BMS 500 (M8) frá Victron Energy er framkomaðar rafkerfisstjórnunarkerfi (BMS) fyrir rafhlöður, sérhannað fyrir Victron Lithium Battery Smart rafhlöður. Sem fullkomnasta og víðtækasta valkostur í BMS-úrvali Victron passar það upp á samhæfingu við Lynx dreifikerfi. Þetta BMS miðlar stjórnun, vernd og eftirliti yfir rafhlöðusafnið þitt af lífefnaferrófosfathleðslum (LiFePO4) fyrir 12 V, 24 V eða 48 V kerfi.

Innbyggð vernd og frammistaða

Lynx Smart BMS 500 (M8) hefur innbyggðan öryggissamtengil fyrir 500 A (600 A í 5 mínútur) sem starfar sem varnarkerfi ef frumstjórnunarbilunar verða (ATC, ATD og/eða DVCC). Það starfar einnig sem aðalrofi kerfisins sem hægt er að stjórna fjarlægt. Innbyggður fyrirhlaðningarrásarrásarkerfi fyrirhlaðar fyrir háa straumspennu við tengingu á rafhlöðum með háa viðnámseiginleika eins og MultiPlus/Quattro eða öðrum öfugspennukerfum, og fellur þannig út þörf fyrir ytri fyrirhlaðningarrás. Innbyggður straumskammtar gefur rauntímagögn um hleðslustöðu (SOC), spennu, straum og feril, á sama hátt og aðrir straumskammtar frá Victron Energy.

Framúrskarandi samskipti og tengingarhæfni

Eftirlit og stjórnun á Lynx Smart BMS 500 (M8) fer fram með VictronConnect-forriti um Bluetooth eða með GX-tæki (t.d. Cerbo GX) og VRM-portalinu fyrir fjartiltökueftirlit. Með VE.Can-stuðningi er einfalt að tengjast (með staðlaðum nettengispúls RJ45) við GX-tæki. CAN-bus samskiptastaðallinn, byggður á NMEA 2000, tryggir auðvelda samhæfingu í sjávarnetum, og sendir gögn BMS til sjómanna fjölnota skjáa (MFD) með VE.Can til NMEA 2000 micro-C karla tengingu. DVCC (Distributed Voltage and Current Control) virkni leyfir sjálfvirka stjórnun á öfugspennukerfum og sólarkerfum Victron sem eru samhæfð með GX-tæki. ATC/ATD tengingar eru einnig fáanlegar til að stjórna þriðja aðila hleðslutækjum og hleðslum sem hafa fjarlægt rofa/stoppa port.

Viðbótarvirki fyrir bestu stjórnun

Lynx Smart BMS 500 (M8) býður upp á forritanlegan rofa sem hægt er að stilla sem viðvaranarrofa (með fyrirvaran) eða til að stjórna rafmagni með ytri stjórnun. AUX tenging veitir aukaafli (1,1 A við kerfisspennu) fyrir sérstakar hleðslur, svo sem GX-tæki, jafnvel eftir að BMS hefur slökkt á hleðslum vegna lágspennu á frumhlöðum. Það hefur einnig eftirlit með 4 Lynx dreifum tengdum með VictronConnect eða GX-tæki. Lynx Smart BMS 500 (M8) greinist með M8 rafskammta tengingu.

Expert review

Pol CONIN

Digital Manager

« The intelligent and secure heart of your Victron Energy lithium system »

The Lynx Smart BMS 500 (M8) is a strategic component for any Victron Energy installation using Smart lithium batteries. It goes beyond the basic BMS function by integrating a 500 A main safety contactor and a shunt battery controller, elements often external in less integrated systems. This consolidation simplifies system architecture and enhances overall reliability. The pre-charge circuit is a major asset for protecting inverters/chargers against inrush currents, thereby extending their lifespan. Its VE.Can and NMEA 2000 communication capability is essential for seamless integration into modern marine ecosystems, enabling critical data reporting (state of charge, voltage, current) to MFDs. Monitoring Lynx Distributor fuses, combined with parallel redundancy for multiple battery banks, provides increased flexibility and security. The AUX power supply for GX devices during power outages is a smart feature, ensuring resilient supervision even under critical conditions. This BMS is a key investment for the performance and durability of a high-quality Victron Energy energy system.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Lynx Smart BMS 500 (M8)

871,43€

871,43€ ~~1.161,60€~~

Complete your installation with

Complementary equipment

Victron Energy

Rafmagnsgeymir Lithium 12,8V/330Ah Smart

Ref : BAT512132410

1.633,00€

1.633,00€ ~~2.118,00€~~

Victron Energy

Lítíumrafhlöðun Smart 25,6V/100Ah-a (2,56 kWh) NG

Ref : BAT524110620

1.224,00€

1.224,00€ ~~1.693,20€~~

Victron Energy

Lítíumrafhlöðun Smart 25,6V 100Ah

Ref : BAT524110610

1.330,00€

1.330,00€ ~~1.881,60€~~

Victron Energy

Rafspenna líþíum Smart-a 25,6V 200Ah

Ref : BAT524120610

2.006,00€

2.006,00€ ~~2.715,60€~~

Victron Energy

Umbreytir Phoenix Smart 12/2000 230V

Ref : PIN122201000

683,81€

683,81€ ~~780,00€~~

Victron Energy

Umbreytingartæki Phoenix Smart 12/500VA 230V Schuko

Ref : PIN121501200

143,78€

143,78€ ~~180,00€~~

Victron Energy

SmartSolar MPPT 100/15

Ref : SCC110015060R

77,45€

77,45€ ~~100,80€~~

Hleðslutæki Orion-Tr Smart 12/48-8A DC-DC einangrað

Victron Energy

Hleðslutæki Orion-Tr Smart 12/48-8A DC-DC einangrað

Ref : ORI124838120

228,46€

228,46€ ~~313,20€~~

Frequently asked questions

Need help? Contact us

What is the Lynx Smart BMS 500 (M8) and what is its main role?

The Lynx Smart BMS 500 (M8) is a battery management system (BMS) designed for Victron Lithium Smart (LiFePO4) batteries. It integrates a positive and negative busbar, a BMS, a 500 A main contactor, and a battery monitor. Its role is to protect and manage the battery bank, while providing detailed information on their status and simplifying the system architecture.

Which batteries are compatible with the Lynx Smart BMS 500 (M8)?

The Lynx Smart BMS 500 (M8) is specifically designed to be compatible with the Victron Lithium Battery Smart battery range. These batteries are Lithium Iron Phosphate (LiFePO4) type and are available in 12.8 V or 25.6 V.

Which system voltages are supported by the Lynx Smart BMS 500 (M8)?

The Lynx Smart BMS 500 (M8) supports system voltages of 12 V, 24 V, and 48 V. Lithium Smart batteries can be connected in series, parallel, or series/parallel to form a battery bank suitable for these voltages.

What is the continuous nominal current rating of the integrated main contactor?

The main contactor integrated into the Lynx Smart BMS 500 (M8) has a continuous nominal current rating of 500 A.

What is the peak current that the main switch can handle?

The Lynx Smart BMS 500 (M8) main switch can handle a peak current of 600 A for 5 minutes.

What is the purpose of the integrated pre-charge circuit?

The integrated pre-charge circuit prevents high inrush currents when connecting capacitive loads, such as a MultiPlus/Quattro or another inverter. This eliminates the need for an external pre-charge and protects the equipment from damage.

How can I monitor and control the Lynx Smart BMS 500 (M8)?

You can monitor and control the Lynx Smart BMS 500 (M8) in two main ways:

Via Bluetooth, using the VictronConnect app on your smartphone or tablet.Via a GX device (such as a Cerbo GX), which also enables remote supervision via the VRM portal.

What information does the integrated battery monitor provide?

The integrated battery monitor provides real-time data such as state of charge (SoC), voltage, current, as well as historical data and system health information.

Is it possible to connect multiple Lynx Smart BMS units in parallel to increase capacity or redundancy?

Yes, the parallel redundancy function allows connecting multiple Lynx Smart BMS units in the same installation. Each BMS manages its own battery bank, and together they form a single redundant battery system. Up to 5 BMS units can be paralleled.

Is the Lynx Smart BMS 500 (M8) compatible with NMEA 2000 marine networks?

Yes, the Lynx Smart BMS 500 (M8) is compatible with NMEA 2000 marine networks. Its CAN bus protocol is based on NMEA 2000 (and J1939), enabling easy integration and data transmission to marine multifunction displays (MFDs) via a VE.Can to NMEA 2000 micro-C male cable.

What are the physical dimensions and weight of the Lynx Smart BMS 500 (M8)?

The dimensions of the Lynx Smart BMS 500 (M8) are 190 x 180 x 80 mm (height x width x depth). Its weight is 1.9 kg.

What is the operating temperature range of the Lynx Smart BMS 500 (M8)?

The Lynx Smart BMS 500 (M8) is designed to operate within a temperature range from -40 °C to +60 °C.

What is the IP protection class of the Lynx Smart BMS 500 (M8)?

The Lynx Smart BMS 500 (M8) has an IP22 protection class, meaning it is protected against solid objects larger than 12.5 mm and against water droplets falling at a 15-degree angle.

Can the Lynx Smart BMS monitor the fuses of connected Lynx distribution blocks?

Yes, the Lynx Smart BMS can monitor the fuse status of up to 4 connected Lynx distribution blocks. It can also trigger an alarm in case of a blown fuse, and this information is accessible via VictronConnect or a GX device.

How are Lynx modules (such as the Lynx Smart BMS and Lynx distribution blocks) interconnected?

Lynx modules are designed to interconnect easily. They connect directly to each other to form a compact and integrated distribution system using common busbars.

What is the power consumption of the Lynx Smart BMS 500 (M8) in the different operating modes?

Power consumption varies by mode:

OFF Mode: 0.3 mA for all system voltages.Standby Mode: Approximately 0.6 W (50 mA at 12 V).ON Mode: Approximately 2.6 W (217 mA at 12 V), depending on relay state.

What is the maximum output current of the AUX terminal?

The AUX terminal provides a continuous auxiliary power supply of 1.1 A at system voltage. It is protected by a resettable fuse and can power specific loads (such as a GX device) even after the BMS has cut main loads in case of low cell voltage.

Is the Lynx Smart BMS 500 (M8) covered by a warranty?

Yes, the Lynx Smart BMS 500 (M8) is covered by Victron Energy’s standard manufacturer warranty. For specific details and warranty conditions, refer to Victron Energy’s official documentation or contact their customer service.

What type of cable is used to connect the batteries to the BMS?

To connect Lithium Smart batteries to the Lynx Smart BMS, specific BMS cables (BTV cables) are used. These are 3-pole circular male and female connectors with an M8 screw ring. Up to 20 batteries can be connected in the same system.

What are the main functions of the Lynx Smart BMS 500 (M8) and what does it include?

The Lynx Smart BMS 500 (M8) is an advanced Battery Management System (BMS), specifically designed for Victron Energy Smart Lithium batteries. It is the intelligent and secure core of your energy system, integrating several key features:

Battery Management System (BMS): It protects lithium batteries against overvoltage, undervoltage, overcurrent, and extreme temperatures, ensuring their safety and extending their lifespan.Integrated main contactor: A 500 A continuous (600 A peak for 5 minutes) safety contactor is integrated. It acts as a secondary safety system and can also serve as the main system switch, controllable remotely.Pre-charge circuit: This integrated circuit prevents high inrush currents that could damage inverters/chargers (such as MultiPlus/Quattro) when connected to capacitive loads.Battery monitor (shunt): It provides accurate real-time data, such as state of charge (SOC), voltage, current, and historical data, similar to other Victron Energy battery monitors.Integration with the Lynx distribution system: The Lynx Smart BMS is an integral part of the Lynx distribution system, simplifying the architecture and connections of your installation.Monitoring of Lynx Distributor fuses: It can monitor the status of fuses on up to 4 connected Lynx distributors and trigger an alarm if a fuse blows.Advanced communication:

Bluetooth: Enables monitoring and configuration via the VictronConnect app on your smartphone or tablet.VE.Can: Facilitates communication with a GX device (e.g., a Cerbo GX) for comprehensive supervision and remote control via the VRM portal.NMEA 2000: Provides easy integration into marine networks, allowing data display on compatible multifunction displays (MFD).Programmable relay: This relay can be configured to function as an alarm relay or to control an alternator via its external regulator.AUX terminal: Provides auxiliary power (1.1 A at system voltage) to specific loads (such as a GX device) even if the BMS has cut off main loads in case of low cell voltage.Parallel redundancy: Allows up to 5 Lynx Smart BMS units to be connected in parallel, each with its own battery bank, to create a redundant and secure battery system.