Gestion de batterie Smart BMS CL 12/100 - Victron Energy

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Spara 18%

Victron Energy

BMS110022000

Smart BMS CL 12-100

Victron Energy Smart BMS CL 12-100 is an all-in-one battery management system designed for 12 V systems with a Victron Smart 12.8 V alternator and lithium batteries. It protects the alternator from overcharging and monitors each cell to prevent under/overvoltage and high temperatures.

Retail priceGet pro pricing

157,61€

157,61€ ~~193,20€~~

með skatti Sendingar reiknaðar við greiðslu.

Á lager

Free pickup point for orders over €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

through our network of certified installers

Find an installer

Service & Support

Choose additional installation support

Technical specifications

Tilgangur	BMS
Samhæfar rafhlöðutækni	LiFePO4
Samhæfar rafhlöðuseríur	Victron Lithium Smart
Nefnd spenna	12.8
Fjöldi rafhlöðuhópa	1.0
Samfelldur straumur (A)	100.0
Hámarks hleðslustraumur (A)	100.0
Fjöldi studdra frumna	4 cellules
Samskiptareglur	Bluetooth
Sæmilegur Bluetooth	Oui
Fjarrofi	Oui
Útgangur fyrir fyrirvaralarm	Oui
Útgangur fyrir neyðarfrátengingu neytenda	Oui
Útgangsrofi hleðslu	Oui
Verndarvirkni	Over-voltage, Under-voltage, Over-temperature
Stærð tenginga	M8, Faston 6.3 mm
Tegund tengingar	Bornes à vis M8, Faston, Connecteurs à fiches
Gerð festingar	Montage en surface
IP-stig	IP65
Hitastigsviðmið við notkun	-40 °C à +60 °C
Mál (L x H x D)	120 x 65 x 224 mm
Þyngd	1.6
Alternator Charge Current Limit A	90
Alternator Charge Current Limit Percent	90
Automotive Directive Compliance	ECE R10-5
Auxiliary Fuse Rating A	7.5
Innbyggð rafhlöðueftirlit	Oui
Battery Overcharge Current Protection	Oui
Rafhlöðutækni	LiFePO4
Charge Disconnect Output Current Limit Ma	10
Current Consumption Off Mode Ma	5
Current Consumption On Mode Ma	16
Dc Connection Terminal Type	M8
Dc Power Connection Torque Nm	10
Rafspenna við losun	11.2
EMC útgeislunarstaðall	EN 61000-6-3, EN 55014-1
EMC ónæmisstaðall	EN 61000-6-2, EN 61000-6-1, EN 55014-2
Mælt rafmagnsbrjóst	100
Hámarksraki við notkun	100
Input Voltage Start Charging	13
Innbyggður BMS	Oui
Áætluð notkun	Véhicules, Bateaux
Load Disconnect Output Current Limit Ma	10
Hámarksfjöldi rafhlöð í parallel	20.0
Hámarksfjöldi rafhlöð í röð	1.0
Max System Energy Kwh	84
Pre Alarm Output Current Limit A	1
Pre Alarm Output Short Circuit Protected	Non

Detailed description

Hannaður fyrir 12 V kerfi með rafliðu, Smart BMS CL 12-100 frá Victron Energy er einnar einingar rafhlöðustjórnarkerfi (BMS) fyrir Victron Smart lithium rafhlöður 12,8 V. Það tryggir vernd og eftirlit með hverri einstakri frumu, með getu til að stjórna allt að 20 rafhlöðum fyrir hámarksgeymslugetu upp á 84 kWh í 12 V kerfi. Sérhannaður fyrir farartæki og báti, inniheldur þetta BMS nauðsynlega vernd fyrir rafliðu og rafhlöður.

Innbyggð vernd og straumtakmarkanir

Portið Alternateur/Starter Batt+ á Smart BMS CL 12-100 hefur rafeindlega straumtakmörkun við um 90 % af stærð rafsegulsins. Til dæmis, með 100 A rafsegul er innstreymi straums takmarkað við um 90 A. Þessi virkni verndar rafliðu fyrir ofhleðslu, forðar þannig ofhitnun og bilun 12 V rafliðna við langvarandi notkun við fullri afl. Hún kemur í veg fyrir ofhleðslu á lithium rafhlöðu með of miklum hleðslustraum. Straumurinn er einstefnuhleðsla og kemur í veg fyrir losun á lithium rafhlöðu í árafliðu rafhlöðu.

Framúrskarandi eftirlits- og stjórnunarvirki

Þetta BMS er með útgang til að slökkva á hleðslu og hleðslustraumi, sem gerir kleift að slökkva á hleðslugjöfum eða DC neytendum við lága/háa spennu frumu eða ofhita. Útgangur fyrir fyrirvaralarm getur virkjað relé, LED eða hljóðvarpa fyrir varúðarskilaboð áður en rafhlöður eru slökktar. Fjarstýringin með rofa fyrir kveikju/rofi gerir kleift að slökkva á hleðslu um rafliðuportið eða slökkva kerfið alveg. Uppsetning og eftirlit fer fram með VictronConnect forritinu og Bluetooth, með augnablikshraða lestur á lykilgildum fyrir fljótlega greiningu.

Expert review

Pol CONIN

Digital Manager

« Optimized protection of 12V lithium systems with alternator »

Victron Energy's Smart BMS CL 12-100 is a strategic solution for securely integrating 12.8 V Smart lithium batteries into onboard electrical systems for vehicles and boats. Its "all-in-one" design simplifies the architecture by consolidating cell protection and alternator protection into a single module. The key benefit lies in its ability to electronically limit the alternator's charging current, a critical feature for preventing overheating and premature degradation of standard alternators, which are not designed for continuous maximum loads. This allows the use of stock alternators without costly modifications, thereby increasing practical value for retrofit installations or first-fit systems where simplicity is a priority.

During installation, it is essential to consider the management of DC loads and charging sources. While the BMS includes disconnect outputs, the use of external devices such as a BatteryProtect or a Cyrix-Li-Charge relay may be necessary for complete and secure system shutdown, particularly for "phantom" loads that can slowly discharge the battery. Victron's expertise in energy management ensures compatibility with other brand products, facilitating seamless integration into an existing Victron ecosystem. It is also critical not to underestimate the importance of configuration via VictronConnect to adjust disconnection and alarm thresholds, ensuring optimal protection against deep discharge and overcharging.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Smart BMS CL 12-100

157,61€

157,61€ ~~193,20€~~

Complete your installation with

Complementary equipment

Victron Energy

Hleðslutæki fyrir rafhlöður Blue Smart IP65 12V 25A CEE 7/16

Ref : BPC122531034

191,81€

191,81€ ~~246,00€~~

Victron Energy

Hleðslutæki með einangrun Orion Tr Smart 12/12-18A (220W) DC-DC

Ref : ORI121222120

153,47€

153,47€ ~~205,20€~~

Victron Energy

Stjórnandi hleðslu SmartSolar MPPT 100/30

Ref : SCC110030210

117,17€

117,17€ ~~164,40€~~

Victron Energy

GX Touch 50

Ref : BPP900455050

202,37€

202,37€ ~~282,00€~~

Victron Energy

Stjórnandi rafhlöðunar SmartShunt IP65 500A

Ref : SHU050150050

111,00€

111,00€ ~~128,40€~~

Frequently asked questions

Need help? Contact us

What is the Victron Energy Smart BMS CL 12-100?

The Victron Energy Smart BMS CL 12-100 is an all-in-one battery management system (BMS). It is specifically designed for Victron Smart lithium batteries 12.8 V and 12 V systems equipped with an alternator, including vehicles and boats. Its primary function is to protect and monitor each individual cell of the battery.

What type of battery is this BMS designed for?

This BMS is specifically designed for Victron Smart 12.8 V lithium batteries. It provides protection and monitoring for each individual cell within these batteries.

How many Victron Smart 12.8V lithium batteries can be connected to this BMS?

Up to 20 Victron Smart 12.8 V lithium batteries can be connected in a single system managed by this BMS.

What is the maximum energy storage capacity that this BMS can handle in a 12V system?

In a 12 V system, the Smart BMS CL 12-100 can manage a maximum energy storage capacity of 84 kWh by connecting up to 20 batteries.

What is the main function of the Alternator/Starter Batt+ port?

The Alternator/Starter Batt+ port provides current limiting and unidirectional current flow from the alternator to the lithium battery. This allows any 12 V alternator (and starter battery) to be safely connected to the lithium battery while protecting the alternator from overload and the lithium battery from excessive charging currents.

How does the Smart BMS CL 12-100 protect the alternator?

The Smart BMS CL 12-100 protects the alternator by electronically limiting the input current on the Alternator/Starter Batt+ port to approximately 90% of the fuse rating. For example, with a 100 A fuse, the input current is limited to about 90 A. This limitation prevents the alternator from overheating and failing in the event of prolonged operation at full power.

Can current flow from the lithium battery to the starter battery?

No, current flow is unidirectional. The Smart BMS CL 12-100 prevents current from flowing from the lithium battery to the starter battery, protecting the lithium battery from deep discharge.

What are the charge or discharge cutoff conditions managed by the BMS?

The BMS monitors and protects each individual battery cell. It will disconnect the alternator, charging sources, or DC loads in the following cases:

Low or high battery cell voltageExcessive temperature

What is the pre-alarm output used for?

The pre-alarm output can be used to activate a relay, an LED, or an audible alarm. It emits a warning signal before the BMS disconnects the batteries from the system in case of imminent low cell voltage. The alarm is triggered with a minimum delay of 30 seconds before the disconnection output for load shedding activates.

What is the IP protection rating of this Smart BMS?

The Smart BMS CL 12-100 has an IP65 electronic protection rating. This means it is protected against dust and low-pressure water jets from all directions.

What are the dimensions and weight of the Smart BMS CL 12-100?

The dimensions of the Smart BMS CL 12-100 are 65 x 120 x 224 mm (height x width x depth). Its weight is 1.6 kg.

How can I monitor and configure the Smart BMS CL 12-100?

Monitoring, initial configuration, and diagnostics of the BMS are performed via Bluetooth using the VictronConnect application. This app allows you to view key parameters in real time.

What is the "Instant Readout" feature in the VictronConnect app?

The 'Instant Readout' is a feature in the VictronConnect app that allows real-time reading of the most critical BMS values without needing to connect directly to the BMS. This simplifies quick diagnostics and provides better range than standard Bluetooth connections.

Is the Smart BMS CL 12-100 compatible with all 12 V alternators?

Yes, it is designed to be safely connected to any 12 V alternator via its dedicated input, which provides current limiting and protection against alternator overload.

Which type of electrical systems is this BMS primarily designed for?

This BMS is specifically designed for 12 V systems equipped with an alternator, such as those found in vehicles and boats.

Can I use this BMS with lithium batteries from other brands?

No, the Smart BMS CL 12-100 is an all-in-one battery management system specifically designed for Victron Smart 12.8 V lithium batteries. It is not compatible with batteries from other brands.

Which types of DC loads can be controlled by the load-disconnect output?

The load-disconnect output can be used to control DC loads with a remote on/off input, such as BatteryProtect units, inverters, or DC-DC converters. It cuts the load in case of cell undervoltage risk to prevent deep discharge.

Which types of chargers can be controlled by the load disconnect output?

The load disconnect output can control the remote on/off port of various chargers, including the Phoenix Smart Charger IP43, a Cyrix-Li-Charge relay, or a Cyrix-Li-ct battery combiner. It allows the charge to be interrupted in case of cell overvoltage or excessive temperature.

What is included in the Smart BMS CL 12-100 box?

The Smart BMS CL 12-100 box contains the following items:

The Smart BMS CL 12-100A ground wire with a 10 mm eyelet lugA 2-pin plug with pre-installed looped wireA 3-pin plug for charge/discharge disconnection and pre-alarmA pre-installed 100 A Megafuse fuseAn ATO fuse holder with two 7.5 A fuses

What are the important safety precautions to take during installation?

During installation, it is imperative to follow national safety regulations. Installation must be carried out only by qualified and trained installers. Before any modification of connections, the system must be powered off and the absence of dangerous voltages must be verified. It is also crucial not to discharge a new lithium battery before it has been fully charged and to charge it only within the specified limits.