Umbreyta Phoenix VE.Direct Schuko 12V/1450W

The Victron Energy VE.Direct Schuko inverter, model PIN122161200, is a DC to AC power converter from the VE.Direct series. It is designed to provide a stable 230V AC output from a 12V DC battery source, with a Schuko-type output socket.

This inverter can supply a continuous power of 1450W at an ambient temperature of 25°C. If the ambient temperature reaches 40°C, the continuous power is 1300W.

The inverter can deliver a peak power of up to 2100W for a maximum duration of 15 seconds. This capability is useful for starting loads with high inrush current, such as certain power tools or power converters.

This inverter is equipped with a Schuko (CEE 7/4) AC output socket, standard in continental Europe.

The AC output voltage is 230VAC +/- 3%. The output frequency is configurable at 50 Hz or 60 Hz, with an accuracy of +/- 0.1%.

Yes, the inverter includes an ECO mode. In this mode, the inverter enters standby when the connected load drops below a predefined value (minimum load of 15W). It then briefly reactivates at regular intervals (default every 2.5 seconds, adjustable) to check if the load has increased. If the load exceeds a predefined level, the inverter remains powered on.

The inverter includes multiple protections to ensure reliability and system safety:

Short-circuit protection on outputOverload protectionOver-voltage protection (high battery voltage)Under-voltage protection (low battery voltage)Over-temperature protectionHigh DC ripple protection

Yes, the inverter has a VE.Direct communication port. It can be connected to a computer via a VE.Direct to USB interface cable, or to smartphones, tablets, and Apple/Android MacBooks via a VE.Direct Bluetooth Smart dongle. This connectivity enables remote monitoring and configuration.

Via the VE.Direct port, you can configure several parameters, including:

Battery low voltage alarm and reset levelsBattery low voltage cut-off and restart levels (including dynamic cut-off)AC output voltage (range 210 to 245V)Output frequency (50 Hz or 60 Hz)ECO mode parameters (enable/disable and detection level)

The maximum efficiency of this 12V inverter is 91%. This indicates very efficient power conversion, minimizing energy losses.

The inverter can operate within an ambient temperature range of -40°C to +65°C. It is equipped with a fan-assisted cooling system. Note that a power derating of 1.25% per °C is applied above 40°C.

For optimal performance, the inverter must be installed on a flat surface. Recommended mounting options are:

On a base (flat mounting)On a vertical wall, with the fan at the bottomOn a horizontal wallIt is not recommended to mount it on the ceiling (inverted) or on a vertical wall with the fan at the top.

To ensure proper operation and prevent overheating, it is essential to leave at least 10 centimeters of clearance around the inverter to allow adequate airflow. Ventilation vents must not be obstructed. The inverter will shut down automatically in case of overheating and restart once the temperature returns to a safe level.

For optimal connection of the 12V/1600W inverter to the battery, the recommended DC cable section is 50 mm², whether the cable length is between 0 and 1.5 meters, or between 1.5 and 3 meters.

Yes, this inverter is a Safety Class I product, which means the chassis must be grounded. A grounding point is located outside the product. The ground conductor connecting the chassis ground lug to ground must have at least half the cross-section of the conductors used for the battery connection.

A remote on/off switch can be connected to a dedicated two-pole connector on the inverter. Alternatively, the left contact of this connector can be wired to the battery positive, which is useful for automotive applications, for example, by wiring it to the ignition switch. Note that the inverter's front switch must also be set to 'On' or 'ECO' for the device to start.

A reversed-polarity connection of the battery cables will blow the internal fuse and may damage the inverter. Although the internal fuse on this model is replaceable, it is critical to observe the correct polarity to prevent damage.

This inverter is designed to power a wide range of 230V AC equipment. Thanks to its high start-up power, it can handle loads such as power converters for LED lamps, halogen lamps, and various electric tools that may have a high inrush current at start-up.