Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 23%

B&G

000-11551-001

B&G H5000 3D kustības sensors

The B&G 3D motion sensor is a key component of the H5000 instrumentation system, required to enable the motion correction functions of the Hercules and Performance processors. It measures yaw, roll, and pitch rates to provide wind data and autopilot control with superior accuracy over the NMEA 2000 network.

Includes: 3D motion sensor.

Public priceGet pro pricing

939,55€

939,55€ ~~1.234,80€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Maksimālais elektriskais patēriņš	0.6
Tipisks elektriskais patēriņš	0.6
Atbilstība ACMA	Radiocommunications (Electromagnetic Compatibility) Standard 2008
Lietojumprogramma	Navigation de performance, Correction des données de vent, Pilote automatique
Mērījumu asu skaits	3
Kustības mērīšana	Yes
Platjoslas pārraides standarts	EN 300 328 V2.1.1
Kalibrēšanas nepieciešamība	Intégration et calibration via le processeur H5000
Sertifikāti	CE, EU 2014/53/EU, EN 60950-1:2006, EN 301 489-17 V3.1.1, EN 300 328 V2.1.1, Radiocommunications Devices (Compliance Labelling) Notices 2003, ACMA Radiocommunications (Short Range Devices) Standard 2004, Radiocommunications (Electromagnetic Compatibility) Standard 2008
CE deklarācijas veidotāja adrese	Nyaaskaiveien 2, 4374 Egersund, Norway
CE deklarācijas parakstītājs	Navico
Krāsa	Noir
Kompass drošības attālums	30
Saderīgā tīkla sistēma	NMEA 2000
Compatible Reseau	CAN
Saderīgās sistēmas	H5000 Hercules/Performance systems
Konektora tips	Micro-C (NMEA 2000)
Vēja datu koriģēšana	Yes, correction based on boat movements (roll, pitch, yaw)
Datu apvienošanas algoritms	Intégré
Datu izvades ziņojumu formāts	Data \| * \| CS (Checksum) \| CR (Carriage Return) \| LF (Line Feed)
Pārraidītie dati	Vitesse de lacet, Vitesse de tangage, Vitesse de roulis, Angle de gîte, Angle d'assiette
Dinamiskā precizitāte (Rollis/Pitch)	< 1.0
EMC atbilstība	Oui
EMC platjoslas norma	EN 301 489-17 V3.1.1
EMC testēšanas laboratorija	Timco Engineering Inc.
EMC testēšanas pārskata numurs	170EUT13.PAC, 170DUT13TestReport_Rev2, 2180UT15TestReport_Rev2, 170CUT13
Firmvēra atjaunināšanas atbalsts	Oui
Gīšanas leņķa mērīšana	Yes
H-Link funkcijas	Output of any available B&G function to PC, Control Of Trip Functions E.g. Timer, High update rates
Instalācijas sarežģītība	Faible (connexion réseau NMEA 2000)
IP indekss	IPx6
Ražotāja nosaukums	Navico Holding AS
Ražotāja detaļu numurs	000-11551-001
Kustības mērīšana	Yaw, pitch, roll (3 axes), heel and trim
Kustības datu aizkavēšanās	Faible
Montāžas aprīkojums iekļauts	Oui
Montāžas tips	Area
NMEA 2000 ekvivalenta slodze (LEN)	1
Darbības temperatūra	-15 to 70
Strāvas sprieguma darbības diapazons	9-16
Lietošanas rokasgrāmatas valodas kodi	EN, FR
Komplekta saturs	Capteur de mouvement 3D, Connecteur en T NMEA 2000, Visserie de montage, Documentation
Garenpagrieziena ātruma mērīšana	Oui
Plug & Play	Oui, via NMEA 2000
Ierīces tipiskais elektrības patēriņš	1.2
Barošana	12
Primārā funkcija	Mesure des mouvements du bateau pour la correction des données de vent et le contrôle du pilote automatique
Produkta dziļums	131
Produkta augstums	45
Produkta līnija	H5000
Produkta apakškategorija	Capteur de mouvement
Produkta svars	0.17
Produkta platums	61
RCM deklarācijas datums	2013-11-04
RCM deklarācijas parakstītājs	Michael Voll
Ieteicamā uzstādīšanas vieta	Bas et près du centre de gravité du bateau
RED direktīvas atsauce	2014/53/EU
Rolisa ātruma mērījums	Oui
Drošības norma	EN 60950-1:2006
Sensora tehnoloģija	MEMS (Accéléromètre et Gyroscope 9 axes)
Statiskā precizitāte (Ritināšana/Šūpošanās)	< 0.5
Trim leņķa mērīšana	Yes
Mērījumu kustību veidi	Pitch, roll and yaw rates, heel and trim angles
Lietošana	H5000 processors (Hercules, Performance) and H5000 autopilot
PVN likme Francijā	20
Garantijas periods	2
Hermētiskuma indekss	IPX6
Vadu tīkls	NMEA 2000, CAN
Bezvadu savienojamība	WiFi
Bezvada frekvence	2.4
Garenass grieziena ātruma mērīšana	Oui

Detailed description

B&G H5000 3D kustības sensors ir būtisks instruments H5000 instrumentācijas sistēmas sastāvdaļa, kas paredzēts regates un augstas veiktspējas kruīza jahtām. Tas nodrošina būtiskos kustības datus, kas ļauj H5000 procesoriem koriģēt un precizēt sensoru sākotnējos datus, nodrošinot neatpaliekošu navigācijas un automātiskās stūres precizitāti.

3 asu kustības mērīšana

Šis sensors ar lielu precizitāti mēra laivas kustības trīs asu virzienā. Tas reālajā laikā pārraida:

garenass (Yaw rate),
augšņu leņķa ātrumu (Pitch rate),
rollēšanas ātrumu (Roll rate).

No šiem datiem aprēķina arī:

garenass leņķi (Heel angle),
augšņu leņķi (Trim angle).

Šī detalizēta analīze ir kritiski svarīga, jo ļauj sistēmai atšķirt laivas kustības no reālā vēja, līdz ar to novēršot viļņu un jūras viļņu radīto kļūdu ietekmi un nodrošinot stabilākus un uzticamākus vēja datus.

Integrācija H5000 sistēmas kodolā

3D kustības sensors ir nepieciešams, lai pilnībā izmantotu Hercules un Performance H5000 procesoru iespējas. Bez tā šo centrālo vienību attīstītie kustības koriģēšanas algoritmi paliek neaktīvi. Tā integrācija ievērojami uzlabo H5000 automātiskās stūres reaģētspēju un uzticamību, īpaši nelīdzena jūras apstākļos, ļaujot tai prognozēt laivas kustības. Savienojums ar sistēmu notiek caur standarta CAN tīklu, kas ir savietojams ar NMEA 2000, nodrošinot bezproblēmu integrāciju B&G ekosistēmā.

Tehniskie parametri

Kustības sensors ir izstrādāts jūras vides apstākļiem un ir sertificēts IPx6. Tas darbojas temperatūras diapazonā no -15°C līdz +70°C. Kompakta dizaina korpuss (131 x 61 x 45 mm) ar masu 0,17 kg nodrošina diskrētu instalāciju. Barošana notiek no 12 V līdzstrāvas (9–16 V diapazons) ar ļoti zemo patēriņu 0,6 W, kas atbilst 1 LEN NMEA 2000 tīklā.

Expert review

Pol CONIN

Digital Manager

« The key to the H5000 correction algorithms »

The 3D motion sensor is the key component that unlocks the full potential of B&G H5000 Hercules and Performance processors. Without the yaw, roll, and pitch data it provides, the CPU cannot apply its motion correction algorithms, resulting in less accurate true wind calculations and autopilot performance, especially in rough seas. This is not an accessory but a fundamental component for any serious racer or navigator investing in an H5000 system. Its integration via the NMEA 2000 bus is straightforward, but its onboard positioning is critical: it must be installed as close as possible to the boat's center of gravity to ensure accurate motion measurement.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

B&G H5000 3D kustības sensors

939,55€

939,55€ ~~1.234,80€~~

Complete your installation with

Complementary equipment

Obsolète

B&G

H5000 CPU Hydra

Ref : 000-11545-001

1.116,79€

1.116,79€ ~~1.438,80€~~

Obsolète

B&G

H5000 CPU Performance

Ref : 000-11547-001

2.948,14€

2.948,14€ ~~3.478,80€~~

Obsolète

B&G

H5000 grafiskais displejs

Ref : 000-11542-001

1.031,33€

1.031,33€ ~~1.284,00€~~

B&G

Hercules® procesors

Ref : 000-15135-001

2.540,64€

2.540,64€ ~~3.490,20€~~

Capteur de vent vertical WS710 | B&G France

B&G Capteur de vent WS710 vertical 0.8M - photo 2

B&G

Vēja sensors WS710 vertikāls 0,8 m

Ref : 000-14392-001

2.107,80€

2.107,80€ ~~2.696,40€~~

Navico

Precizijas kompass Precision 9

Ref : 000-12607-001

615,96€

615,96€ ~~842,94€~~

B&G Afficheur numérique Triton² 4,1" - photo 2

B&G

Skaitļotājs B&G Triton² 4,1"

Ref : 000-13294-001

525,96€

525,96€ ~~648,90€~~

B&G WS310 Pack vent avec câble 20m et interface

B&G WS310 Pack vent avec câble 20m et interface - photo 2

B&G

WS310 Komplekts vēja mērītājs ar 20 m kabeli un tīkla interfeisu

Ref : 000-14382-001

507,42€

507,42€ ~~691,74€~~

B&G Capteur de vitesse H5000/H3000 plastique encastré

BG H3000 Speed Sensor - Plastic Flush [SEN-SPD-HPF]

B&G

B&G ātruma sensors H5000/H3000 plastmasas iegrieztais

Ref : SEN-SPD-HPF

185,88€

185,88€ ~~239,40€~~

B&G WS320 Pack vent sans fil avec interface

B&G WS320 Pack vent sans fil avec interface - photo 2

B&G

WS320 bezvadu vēja mērījumu komplekts ar interfeisu

Ref : 000-14383-001

667,34€

667,34€ ~~830,34€~~

B&G

GPS antene B&G ZG100

Ref : 000-11048-002

275,56€

275,56€ ~~351,54€~~

B&G Capteur de vent WS720 vertical 1.1m - photo 2

B&G

Vēja sensors WS720 vertikāls 1,1 m

Ref : 000-14393-001

2.649,16€

2.649,16€ ~~3.282,30€~~

Frequently asked questions

Need help? Contact us

What is the primary purpose of the H5000 3D motion sensor?

The H5000 3D motion sensor is designed to measure boat movements with high precision across three axes. Its data corrects wind information based on roll, pitch, and yaw, providing more stable and accurate wind data for performance sailing and more reliable control of the H5000 autopilot.

Which specific data does this sensor measure and transmit?

This sensor measures and transmits a complete set of data on the boat's behavior, including:

Yaw rate (vitesse de lacet)Pitch rate (vitesse de tangage)Roll rate (vitesse de roulis)Heel angle (angle de gîte)Trim angle (angle d'assiette)

Is this sensor compatible with all B&G systems?

The 3D motion sensor is specifically designed for seamless integration into the B&G H5000 ecosystem. It is particularly required to enable the advanced motion correction functions of the B&G H5000 Hercules and H5000 Performance processors.

How does the sensor connect to the navigation system?

The sensor connects via a standard CAN network, which is compatible with the NMEA 2000 protocol. It integrates into the system's main backbone (H5000) using Micro-C connectors.

What is the required supply voltage for this sensor?

The H5000 3D motion sensor operates on a nominal 12 V DC supply, accepting a voltage range from 9 V to 16 V.

What is the power consumption of the H5000 3D Motion sensor?

The H5000 3D Motion sensor is powered via the NMEA 2000 network.

What are the dimensions and weight of the sensor?

The sensor housing measures 131 x 61 x 45 mm and weighs 0.17 kg.

Is the 3D motion sensor waterproof?

Yes, the sensor housing is rugged and IPx6 certified, meaning it is protected against powerful water jets from all directions.

What is the operating temperature range of the sensor?

The sensor is designed to operate within a temperature range from -15°C to 70°C.

Are there precautions to take when installing cables?

Yes, it is important to follow these recommendations:

Avoid tight bends in cables. Secure all cables firmly to prevent movement. Route data cables away from radar, transmitter, or high-power cables. Ensure water cannot run along cables into connectors.

What safety distance should I maintain from a magnetic compass?

A minimum safety distance of 0.3 meters (1 foot) must be maintained between the sensor and any magnetic compass to avoid interference.

Is the use of this sensor mandatory with an H5000 processor?

While the H5000 system can operate without it, this sensor is an essential component to unlock the full potential of the H5000 Hercules and Performance processors. Without it, advanced wind correction algorithms linked to boat movements cannot be applied.

How does this sensor improve wind data?

By precisely measuring roll, pitch and yaw, the sensor allows the H5000 processor to differentiate true wind from wind induced by the boat's movements. The result is a much more stable and accurate true wind data (TWD and TWS), crucial for performance.

Does this sensor improve the performance of the H5000 autopilot?

Yes, significantly. Motion data enables the H5000 autopilot to anticipate and react more accurately to boat movements, providing better course-keeping and greater responsiveness, especially in rough seas.

Can I connect this sensor directly to a B&G display?

No, the 3D motion sensor is designed to send its data to an H5000 processor (CPU) via the NMEA 2000 network. The CPU uses this information to correct data from other sensors before sending it to the displays.

Does the sensor require specific calibration after installation?

The provided documentation does not mention a specific calibration procedure for the 3D motion sensor itself. It integrates with the H5000 system, which manages calibrations for various data (wind, speed, etc.) using the information from this sensor.

Which country is this product from?

According to the provided data, the country of origin for this product is Mexico.

Can this sensor work with a system from another brand than B&G?

This sensor is designed for optimal integration within the B&G H5000 ecosystem. Although it communicates over a standard NMEA 2000 network, its advanced features are specifically developed to work with the H5000 Hercules and Performance processors.

What are Yaw Rate, Pitch Rate, and Roll Rate?

These are the technical terms for the boat's rotation speeds around its three axes:

Yaw Rate: Heading change rate, the boat's rotation around its vertical axis (course change).Pitch Rate: Pitch rate, the bow-to-stern tilting motion.Roll Rate: Roll rate, the port-to-starboard tilting motion.