H5000 CPU Performance

The H5000 CPU Performance is the central processing unit, the true brain of the B&G H5000 instruments and autopilot system. Its function is to collect, compute, and process raw data from all sensors connected to the boat to provide highly accurate and rapid navigation information to the entire onboard network.

The Performance version is the top tier of the H5000 range, designed for racing and superyachts. It unlocks advanced features not available on lower tiers (Hydra, Hercules):

Dual sensor management: Support for two wind vanes or two rudders for precise leeway angle control.Multiple appendage tracking: Monitoring of multiple appendages such as port, starboard, and central daggerboards.Custom functions: Ability to create up to 16 custom functions.Advanced data: Display of ground wind and rate of turn (ROT).Enhanced polars: Use of improved performance polar targets for maximum optimization.

The H5000 CPU Performance is designed for extensive integration and is compatible with the following networks:

NMEA 2000: One port for connection to the boat's standard network.NMEA 0183: Two bidirectional NMEA 0183 ports for compatibility with older or specific equipment.Ethernet: One RJ45 Ethernet port for connection to a PC, tablet, or router, particularly for configuration via the web interface.

The H5000 CPU Performance central processing unit requires a nominal 12V DC power supply. The accepted operating voltage range is 9V to 16V DC.

The H5000 CPU has very low power consumption. According to the technical documentation, typical consumption is 2.4 Watts (200 mA at 12V). Consumption on the CAN bus is 0.6 Watt (50 mA at 12V), which corresponds to 1 LEN on an NMEA 2000 network.

Configuration, calibration, and diagnostics of the system are performed easily via an integrated web interface. Simply connect a computer, tablet, or smartphone to the same network as the CPU via its Ethernet port to access this interface from a web browser.

The H5000 Performance CPU has several dedicated inputs to directly connect essential sensors:

One input for B&G wind transducer/vane anemometer.One input for speed log (0-5V TTL).Four analog inputs for various sensors (rudder angle, etc.).One input for Man Overboard (MOB) button.One output for an external alarm.

The H5000 CPU Performance housing is certified to IPX5. This ensures protection against low-pressure water jets from all directions, making it suitable for installation in demanding marine environments.

Software updates and system configuration backups are performed simply via the USB port integrated into the device.

Yes, absolutely. The H5000 CPU is designed to integrate seamlessly into a B&G ecosystem. It connects via the NMEA 2000 network to the Zeus series multifunction displays to share and display all navigation and performance data.

Yes, calculating performance data for regattas is one of its main functions. It can accurately compute VMG (Velocity Made Good), whether relative to the wind (VMG Wind) or a waypoint (VMG Waypoint), to help you optimize your heading and speed.

To ensure optimal and durable operation, it is recommended to follow these guidelines when installing cables:

Avoid sharp bends that could damage the cables.Create drip loops so that water drains before reaching the connectors.Keep data cables away from interference sources such as radar cables, radio transmitters, or cables carrying high currents.Secure all cables firmly with cable ties to prevent wear from vibrations.

Yes, the H5000 CPU is the core of the H5000 instrumentation system, designed to operate in perfect synergy with the H5000 autopilot computer. Together, they form a fully integrated and highly efficient navigation and steering system.

The housing dimensions are 210 x 194 x 60 mm. The device weighs 0.7 kg.

To avoid any magnetic interference that could affect your compass accuracy, the installation manual recommends maintaining a minimum safety distance of 0.3 meter (1 foot) between the H5000 CPU and any steering compass.

Yes, the Performance version is specifically designed to use polars data tables. By loading your sailboat's polars, the system can calculate and display the target boat speed (Target Boat Speed) and optimal true wind angle (Target TWA) to maximize performance based on actual wind conditions.

Yes. By connecting the CPU's Ethernet port to a Wi-Fi access point (such as the B&G GoFree WiFi-1 module), you can broadcast all network data to tablets or smartphones. Compatible apps will then allow you to display and interact with H5000 system data wirelessly.

Yes, the Performance version of the H5000 CPU supports dual-sensor management, including two rudder angle sensors. This enables precise measurement and control of each rudder's angle and their differential angle, a critical feature for modern racing sailboats.

Yes, the H5000 system is modular. You can add expansion modules, such as analog or serial modules, to increase the number of available inputs and connect additional sensors or specific devices that do not connect directly to the CPU.

The H5000 CPU features an ultra-fast ARM processor. It delivers processing speeds up to 50 times faster than previous-generation systems, ensuring real-time data updates with zero latency, even when handling numerous sensors and complex calculations.