Motorizētais bateriju pārtraucējs 701-MDVS BEP

The BEP 701-MDVS is a motorized voltage-sensitive battery switch (VSS), designed to automate battery bank management aboard vessels. It combines the features of a charging relay and an emergency parallel switch.

Its primary function is to automate battery bank management by monitoring their state of charge and protecting them against deep discharge. It also provides an emergency coupling function to link battery banks if necessary.

The 701-MDVS is specifically designed to operate with 12V DC battery systems. Its operating voltage range is 8 to 15V DC.

The 701-MDVS can handle a continuous current of 275 amperes DC, an intermittent current of 455 amperes DC, and a peak starting current up to 1250 amperes DC.

In automatic mode, the system continuously monitors battery voltage. If voltage drops below 12.2V for more than 5 minutes, the system automatically disengages to preserve the integrity of the starting battery.

The Emergency Parallel function allows manual or remote linking of battery banks in the event of a failure, ensuring a backup power source for starting or other critical needs.

The built-in LED indicator provides real-time system status via different light codes:

A rapid flash (0.1 sec ON / 0.1 sec OFF) indicates voltage out of specification (below 8V or above 15V). A long flash (5 sec ON / 0.5 sec OFF) indicates emergency parallel mode is engaged. A medium flash (1 sec ON / 1 sec OFF) indicates the VSS is in low-voltage disconnect mode (voltage below 12.2V/24.4V). A steady LED indicates the VSS is engaged. An unlit LED indicates the VSS is disengaged.

The power consumption of the 701-MDVS battery switch is extremely low, drawing only 15 mA when the switch is in the off position.

The battery switch is IPX6 certified for water resistance and is ignition-protected per UL 1107 and ABYC/CE standards, making it fully suitable for marine environments.

The 10 mm (3/8") studs are made of tinned copper and the nuts are made of stainless steel. These materials ensure optimal conductivity and excellent corrosion resistance in a marine environment.

The 701-MDVS is designed to operate reliably in demanding marine environments, with an operating temperature range from -20°C to +60°C (-4°F to 140°F).

Yes, the 701-MDVS is IPX6 certified, meaning it is protected against powerful water jets and can withstand the toughest marine environments.

The mechanical installation of the 701-MDVS is flexible, allowing surface-mount or flush-mount installation depending on your dashboard or battery compartment requirements.

The 701-MDVS is equipped with two 10 mm (3/8") tinned copper studs for power connections, ensuring a robust and reliable connection.

The maximum recommended cable size is 50 mm² (1/0). If using a cable larger than 50 mm², it must be strain-relieved, with an absolute maximum of 70 mm² (2/0).

The recommended torque for stud nuts is 8 Nm (5.9 lbf) to ensure a secure and optimal electrical connection.

The negative wire (black) of the 701-MDVS must be connected to the same battery it is isolating. Each unit must have only one negative connection for correct operation and to prevent erratic behavior.

Yes, the 701-MDVS can be controlled remotely via a compatible remote switch, providing installation flexibility and operational convenience.

To turn the battery switch on remotely, briefly press the remote switch until power activates or the LED indicator lights up. To turn it off, hold the remote switch pressed for more than 2 seconds.