Spīdulīšu slēdzis ON/OFF 12 V sarkans

This switch is a push-button model with an ON/OFF function. Pressing it activates the circuit, and pressing it again deactivates it.

This switch is specifically designed to operate with 12V electrical systems.

The switch features a red ring illumination.

The red ring illumination improves the visibility of the switch, particularly in low-light conditions or at night. It can also serve as a visual indicator of the switch's state (on/off) depending on the wiring.

Yes, as a product from the BEP brand, this switch is designed for marine applications and should therefore offer some resistance to marine environments. For precise details on its ingress protection rating (IP), please refer to the product datasheet.

The BEP push-button switches of this type are usually equipped with rear terminals for cable connections. These terminals can be Faston spade terminals or screw terminals, allowing connection of the main circuit and the illumination power supply.

Yes, this switch is designed for flush mounting. Installation requires cutting the panel or dashboard to insert the switch body, which is then secured in place.

For a typical installation, you will need basic tools such as a drill with a hole saw or cutter matching the switch mounting diameter, tools for stripping and crimping wires, and possibly a screwdriver.

No, this switch is specifically designed for 12V electrical systems. Using it with a voltage higher than 12V could damage the switch and connected components.

Yes, you can use it to control any equipment operating on 12V, provided the operating current of that equipment does not exceed the maximum rated capacity of the switch. It is essential to check the current specifications of both the switch and the device to ensure safety and compatibility.

Yes, as a push-button switch, it provides simple and intuitive activation with a single press. The red ring illumination also makes it easy to locate and use.

The on/off function controls the electrical power supply to a connected circuit or device. Pressing the button once activates the circuit (ON), and pressing it again deactivates it (OFF).

This switch is a latching model. This means a press activates the switch and holds it in the ON state until another press deactivates it (OFF).

The behavior of the illumination (constantly on or only on when the switch is in the ON position) will depend on the wiring scheme chosen during installation. It can be wired in different ways depending on your needs.

This specific model (SKU 80-511-0001-00) features a red ring backlight. Other references in the BEP range may offer different backlight colors, but this version is exclusively red.

BEP switches are generally supplied with basic mounting and wiring instructions to facilitate installation. It is advisable to consult the documentation provided with the product for detailed diagrams.

The required mounting depth for this switch is an important technical specification that depends on the design of its body and the space needed for rear connections. This information is essential to ensure correct installation in your panel. Please refer to the product datasheet for precise dimensions.

Designed for marine use by BEP, this switch is generally built to withstand splashes and water spray. For the exact water resistance level (IP rating), refer to the product's detailed technical specifications.