B&G radara kabelis Halo / Nemesis

To match your boat’s configuration, this cable is available in four different lengths: 5 metres, 10 metres, 20 metres and 30 metres.

This cable is specifically designed to be compatible with all generations of B&G Halo radars (radomes and beam antennas), as well as Nemesis mast displays. It is not intended for older analog radar models or other ranges.

No, it is strongly discouraged to use a standard Ethernet cable. The B&G cable not only carries data but also includes the power conductors required. Additionally, it features specific shielding and waterproof connectors essential for the marine environment.

No, this is a hybrid cable. It handles both Ethernet data transmission and the power supply for your Halo radar antenna or Nemesis display, greatly simplifying installation.

Measure the intended cable run (mast, deck pass-through, bulkheads) precisely and select the shortest suitable length from available sizes (5, 10, 20 or 30m). Avoid choosing a much longer cable to minimize clutter.

If you have excess cable, store it neatly while avoiding tight loops. Excessive loops can create electromagnetic interference that may degrade the quality of your radar signal.

Cutting and resoldering this type of cable is generally not recommended, as it could damage the shielding, compromise waterproofing, and cause data loss at high speeds. Select the factory length that best fits your needs.

Yes, this is an original Navico part (parent company of B&G). Using original parts ensures perfect signal integrity and full compatibility with your marine electronics.

Absolutely. Its construction and sealed connectors are specifically designed to withstand the marine environment, UV exposure, humidity, and temperature variations encountered on a boat.

Yes, this cable is perfectly suited for installation on a mast, arch, or roof support. Its shielding protects it from interference often present along the mast (VHF cables, navigation lights).

Yes, this interconnect cable is compatible with both radomes (closed antennas) and open-array antennas (beam antennas) in the B&G Halo series.

The shielding protects high-speed Ethernet data from electromagnetic interference (EMI). This is critical for Halo radar pulse compression technologies, ensuring a clear radar image without interference.

Yes, the cable is delivered ready to use with its specific waterproof connectors already crimped at the factory, ensuring a reliable and secure connection right out of the box.

Yes, by connecting your Nemesis mast display to your network via this Ethernet cable, you will be able to access the system data and the B&G processor's web server.

When passing through bulkheads or the deck, use appropriate cable glands or stuffing tubes to prevent crushing the cable or damaging connectors. Also avoid pulling too hard on the ends.

B&G, Simrad, and Lowrance are part of the Navico group. As this cable is a Navico part, it is compatible with Halo radars and Ethernet networks from these brands, though it is specifically highlighted here for B&G Halo and Nemesis.

Yes, its high-quality design allows it to support the very high data rates required by advanced radar functions, such as fast and precise target tracking, without loss of information.

It is not recommended to cascade multiple radar cables end-to-end, as each intermediate connection can cause signal or power losses. It is better to use a single continuous cable of the correct length or consult an installer for exceptional distances.

No specific tools are required to connect the connectors themselves, as they screw or clip directly onto the devices. However, standard tools (screwdriver, drill, wire feeder) will be needed for routing the cable inside the boat.