Datiņš 12 V ar vienkāršu pagarinājuma ligzdas savienojumu

The [BLUE SEA] 12 Volt Plug with Single Extension Socket is designed to provide a reliable 12V DC power solution in marine and wet environments. It allows you to safely and durably extend your auxiliary electrical network on board by combining a male plug and a female socket.

Yes, this product is specifically designed for marine and humid environments. It is built with corrosion-resistant components and features moisture protection to ensure reliable performance at sea.

This socket is designed to operate with 12 Volt DC power systems.

The male plug is protected by an integrated 10-amp fuse, limiting the maximum current the system can deliver to 10A. Although the socket can support up to 15A, the fuse protection remains at 10A for the entire system.

Yes, the male plug is fitted with a 10 amp fuse that provides overload protection for your equipment and installation.

The male plug includes an "ON" LED indicator that lights up when the socket is live, allowing easy verification of the power state.

The product is shipped with a robust 1.8-metre cable.

The wiring used is 18 AWG gauge, ensuring efficient conductivity for currents up to 10A.

The conductive components are made of nickel-plated copper alloy, providing excellent conductivity and increased resistance to corrosion, essential in marine environments.

A bayonet locking system is integrated to keep the male plug firmly seated in the socket, preventing unintentional disconnections caused by vibration or movement.

Yes, the socket is fitted with a watertight cap that protects the contacts from moisture and debris when not connected to the male plug.

Yes, the unit is designed to withstand constant vibrations, a common factor in marine environments, thanks to robust components and large contact surfaces for stable electrical connections.

The product combines a male plug and a female socket. The male plug is usually ready to use with its wiring. The female socket requires wiring and installation on a surface.

Ensure the electrical power is disconnected before installation. Wiring must comply with marine electrical standards, respecting polarity and using secure connections. The shaft coupling is designed to be mounted to protect the rear connections from moisture.

The socket is designed with internal strain relief devices for the wiring. The wires must be stripped and connected to the appropriate terminals on the socket, respecting polarity (positive and negative), and the connections must be tight to prevent loosening due to vibrations.

No, this plug is specifically designed for 12 Volt DC systems. Using it with a 24 Volt supply could damage the plug, the fuse, or the connected devices.

No, it is not recommended to use this socket for devices requiring more than 10 amps, as the integrated 10-amp fuse will trip to protect the circuit. This could also overload the wiring and components, even if the socket is rated at 15A.

The male plug is a standard 12V cigarette lighter type, making it compatible with most standard 12V cigarette lighter sockets or accessory sockets. The supplied female socket is also compatible with this type of plug.

The male connector is fitted with a moisture-resistant sealing ring around the shaft. This gasket prevents water ingress and ensures a firm, reliable electrical contact, even in damp conditions.

Yes, both components (male plug and female socket) include built-in strain relief mechanisms. This helps protect the wire connections from mechanical stress and prevents disconnections or damage caused by cable tension.