Pogaizdedzes slēdža aizsargābumba ar atiestatīšanas pogu - caurspīdīga

The BLUE SEA 4135-BSS transparent circuit breaker boot is designed to protect push-button reset circuit breakers in marine environments. It shields the reset mechanism from water, salt moisture, dust, and UV rays, thereby extending the lifespan and reliability of your electrical equipment.

The transparent design of the 4135-BSS boot allows for quick visual inspection of the circuit breaker's condition without disassembly. This facilitates rapid diagnostics and preventive maintenance of electrical systems while providing physical protection against the elements.

No, this boot is specifically sized for push-button reset circuit breakers from BLUE SEA Systems. It ensures optimal compatibility and watertightness with these models.

Installing the boot typically involves sliding it over the circuit breaker's reset button and securing it. For panel-mounted breakers, the boot is often positioned before tightening the breaker's mounting nut, ensuring proper retention and effective protection. Ensure the electrical power is turned off before handling.

The 4135-BSS boot protects the circuit breaker reset mechanism against water (splashes and spray), salt humidity, dust, and ultraviolet (UV) rays. These protections are essential for electrical equipment used in marine environments.

Yes, the BLUE SEA 4135-BSS transparent boot is designed to resist UV rays, which is critical for equipment exposed to sunlight in a marine environment. This helps prevent material degradation and maintains clarity and protective efficiency over time.

No, the BLUE SEA 4135-BSS boot is specifically designed for push-button reset circuit breakers. Its shape and dimensions are not suitable for lever or toggle circuit breakers.

Installing the botte generally does not require specific tools beyond what may be needed for initial circuit breaker assembly (such as a wrench for the mounting nut). The botte simply slides onto the button and is held in place by the circuit breaker's design and mounting.

No, the 4135-BSS boot is designed to protect against splashes, water spray, and moisture. It is not intended to make the circuit breaker watertight in case of total immersion.

Yes, by covering the reset button, the boot helps prevent accidental activations or deactivations caused by unintentional contact or light impacts, while still allowing intentional manipulation.

For optimal sealing, ensure the boot is correctly positioned over the button and that the circuit breaker is properly mounted and tightened, if applicable, so that the boot forms an effective seal with the panel or circuit breaker body. The boot is designed to fit precisely on compatible BLUE SEA circuit breakers.

Although the boot is designed to withstand UV and marine conditions, prolonged and extreme exposure may, over time, slightly alter the transparency of any plastic material. However, its design is optimized to minimize this phenomenon and maintain visibility for as long as possible.

No, although Klixon series circuit breakers may offer similar protections, the BLUE SEA 4135-BSS boot is specifically sized for BLUE SEA Systems push-button models, ensuring optimal compatibility and waterproofing with these units.

The boot is designed to be flexible and should not significantly affect the operation or tactile feel of the reset button. It allows normal pressure to activate or reset the circuit breaker while providing protection.

Yes, the boot is designed to be removable if necessary, for example for maintenance of the circuit breaker or its replacement. It is not permanently fixed, but it stays securely in place once correctly installed.

Yes, the boot is designed for marine environments, which includes resistance to freshwater and saline moisture. Its composition effectively protects against the corrosive effects of salt.

No, the BLUE SEA 4135-BSS circuit breaker bundle is a separately sold protection accessory. The push-button reset circuit breaker is not included with the bundle.

Yes, it is strongly recommended to cut the power supply to the relevant circuit before installing or removing the breaker panel. This is an essential safety measure when working on any electrical components.