Preses blīvējums CableClam ar noslēguma vāciņu no nerūsošā tērauda 0.68"

The overall dimensions of the CableClam with its stainless steel cap are as follows:

Length: 49.83 mm (1.96 inches)Width: 47.05 mm (1.85 inches)Height: 22.61 mm (0.89 inches)

The CableClam is made of a stainless steel cap, a split rubber gasket, a deck ring, and a compression ring. These components work together to ensure watertightness and durability.

Installing the CableClam involves several steps to ensure optimal waterproofing:

Check if the pre-punched rubber gasket provides a tight fit around your cable. If necessary, drill a hole in the gasket for precise adjustment.Slit the rubber gasket from its edge to the drilled hole.Attach the deck ring and its gasket to the mounting surface.Thread the cable end through the stainless steel cap.Slide the compression ring onto the cable, insert the cable through the gasket slit, then press the gasket into the compression ring.Tighten the compression ring to the deck ring by progressively tightening each screw, without over-tightening.Press the stainless steel cap onto the assembly for a clean finish.

The CableClam is designed to be mounted using #6 screws. The mounting points have a pitch of 19.98 mm (0.79 inch).

The stainless steel cap serves multiple purposes. It provides an aesthetic finish above the assembly, protects the fasteners from external elements, and ensures a clean and discreet installation on the deck or bulkhead of your boat.

To adjust the rubber gasket, first determine whether the pre-drilled hole provides a snug fit on your cable. If not, drill a hole in the gasket that ensures a tight fit with your cable’s diameter. Then, slit the gasket from its edge to the drilled hole so you can insert the cable.