Deckhand Dimmer - 12V DC 6A - Deckhand Dimmer - 12V DC 6A

Deckhand Dimmer - 12V DC 6A - Dimensioned Drawing

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 11%

Blue Sea Systems

7506-BSS

Dimmers Deckhand - 12 V DC 6 A

Q: What type of lighting can the Deckhand 7506-BSS dimmer control?

The Deckhand 7506-BSS dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent lights, and halogen lights.

Q: What is the nominal operating voltage of this Blue Sea Systems dimmer?

This dimmer operates at a nominal voltage of 12 V DC.

Q: What is the input voltage range accepted by the Deckhand 7506-BSS drive?

The Deckhand 7506-BSS drive operates within an input voltage range of 9 V to 16 V DC.

Q: What is the maximum output current capacity of this inverter?

The maximum output current capacity of the Deckhand 7506-BSS inverter is 6 A.

Q: What is the function of the integrated 'Bulb Saver' in the dimmer?

The 'Bulb Saver' function (bulb saver) is designed to prevent excessive aging of bulbs during charging phases of the boat's electrical system.

Q: Does the dimmer store the last brightness setting?

Yes, the Deckhand 7506-BSS dimmer has a memory for the last brightness setting used.

Q: What is the operating temperature range of this variable speed drive?

The variable speed drive is designed to operate across a wide temperature range, from -40 °C to 85 °C.

Q: What is the maximum leakage current of the device?

The maximum leakage current of the Deckhand 7506-BSS drive is less than 2 mA.

Q: What type of brightness control does the Deckhand dimmer use?

The dimmer uses continuous pulse-width modulation (PWM) control, allowing adjustment from 0 to 100 % of the input voltage.

Q: Is this autopilot drive supplied with a switch?

Yes, the autopilot drive is supplied with a momentary (ON)-OFF-(ON) switch.

Le variateur Deckhand 7506-BSS de BLUE SEA est une solution numérique de 12 V CC et 6 A pour le contrôle de l'intensité des éclairages marins (LED non régulées, incandescents, halogènes).

Il offre une modulation PWM continue, une mémoire de réglage, et une fonction "bulb saver", et est livré avec un interrupteur momentané (ON)-OFF-(ON).

Ce modèle, qui remplace les 7501/7502, fait partie de la gamme Deckhand, reconnue pour sa fiabilité et sa conformité aux normes ISO 8846 et SAE J1171.

Voltage: 12 V

12 V 24 V

Current: 6 A

6 A 12 A

Public priceGet pro pricing

98,34€

98,34€ ~~110,58€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Vadības interfeisa tips	Numérique (PWM)
Vadības tips	Interrupteur momentané (ON)-OFF-(ON)
Saderināmas apgaismojuma sistēmas	LED non régulées, incandescentes, halogènes
Zone Control	Non
Strāvas sprieguma darbības diapazons	9-16
Tipisks elektriskais patēriņš	<0.024
Uzstādīšanas veids	Montage sur panneau
Produkta izmēri	82.55 x 88.9 x 44.45
Dimmēšana atbalstīta	Oui
Komplekta saturs	Variateur Deckhand, interrupteur momentané (ON)-OFF-(ON)
Sertifikāti	CE,ISO 8846,SAE J1171,SAE J1455,SAE J1113
Ražotāja nosaukums	BLUE SEA SYSTEMS
Ražotāja detaļu numurs	7506
Maximum Output Current	6
Maximum Parasitic Current	2
Nominālais spriegums	12
Maksimālā darba temperatūra	85
Minimālā darba temperatūra	-40
Produkta SKU	7506-BSS

Detailed description

Izstrādāts jūras apgaismojuma vadībai, BLUE SEA SYSTEMS variators Deckhand 7506-BSS nodrošina precīzu gaismas intensitātes regulēšanu. Ierīce ir savietojama ar nelielas regulācijas LED, kvēlspuldzēm un halogēnspuldzēm, kas darbojas ar nominālo spriegumu 12 V DC, darbības diapazonā no 9 V līdz 16 V.

Tehniskās funkcijas un darbība

Variators Deckhand 7506-BSS izmanto nepārtrauktu pulsa platuma modulācijas (PWM) vadību, ļaujot regulēt no 0 līdz 100 % no ieejas sprieguma. Maksimālā iziešanas strāva ir 6 A, bet patērētā strāva ir zemāka par 2 mA. Ierīce darbojas plašā temperatūru diapazonā, no -40 °C līdz 85 °C. Spuldzes dzīves ilguma pagarināšanas funkcija novērš spuldzes novecošanos sistēmas lādes fāzē. Šis modelis arī atceras pēdējo gaismas intensitātes iestatījumu un piedāvā izgaismoto izeju ar regulējamu aizkavējumu no 1 līdz 5 minūtēm, lai atvieglotu iziešanu. Tā nobīdītās montāžas kājiņas ļauj blīvi izvietot vairākus variatorus, un tas tiek piegādāts ar momentāno slēdzi (ON)-OFF-(ON).

Pozicionēšana un atbilstība

Variators Deckhand 7506-BSS ir universāla apgaismojuma vadības risinājuma iespēja mazas un vidējas jaudas jūras ķēdēm. Deckhand sērijā tas ir vismazāk jaudīgais 12 V DC modelis (6 A), ko papildina modeļi 7507 (12 A) un 7508 (25 A) lielākiem prasībām, kā arī 24 V DC versijas (7504, 7509). Šis variators atbilst aizdedzes aizsardzības standartiem ISO 8846 un SAE J1171, un ir marķēts ar CE, garantējot tā uzticamību un drošību jūras vidē. Tas aizstāj iepriekšējos zīmola modeļus 7501 vai 7502, piedāvājot uzlabotas funkcijas ar izmēriem 82,55 mm platumā un 88,9 mm augstumā.

Documentation

Type	Nom
	EN - Instructions - Deckhand Dimmer - 12V DC 6A
	EN - Deckhand Dimmer - Deckhand Dimmer - 12V DC 6A

Payment and security

Your payment information and data are processed securely.

Dimmers Deckhand - 12 V DC 6 A

98,34€

98,34€ ~~110,58€~~

Complete your installation with

Complementary equipment

Coupe-batterie à distance ML-RBS avec commande manuelle - 12V DC 500A - ML-RBS Remote Battery Switch with Manual Control - 12V DC 500A

Coupe-batterie à distance ML-RBS avec commande manuelle - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Attālināmais bateriju atslēdzis ML-RBS ar manuālu vadību - 12 V līdzstrāva 500 A

Ref : 7700B-BSS

245,71€

245,71€ ~~297,48€~~

Sélecteur de batterie e-Series 4 positions - Mounting Diagram

Blue Sea Systems

Bateriju izvēles slēdzis e-Series 4 pozīcijām

Ref : 9001EB-BSS

63,31€

63,31€ ~~70,80€~~

Blue Sea Systems

Ampērmetrs M2 DC

Ref : 1832-BSS

419,60€

419,60€ ~~466,08€~~

Mini OLED DC Voltmeter - Yellow - Mini OLED DC Voltmeter - Yellow

Blue Sea Systems

Mini līdzstrāvas voltmetrs OLED - Dzeltenais

Ref : 1733-BSS

52,97€

52,97€ ~~64,44€~~

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Automātisks lādēšanas relejs ML-ACR ar rokas kontroli - 12 V līdzstrāva 500 A

Ref : 7622B-BSS

245,47€

245,47€ ~~362,28€~~

12/24V Dual USB 4.8A Chargers - Switch Mount - 12/24V Dual USB 4.8A Chargers - Switch Mount

Blue Sea Systems

Dubultā USB lādētāja 12/24 V 4,8 A - paredzēta slēdža montāžai

Ref : 1039-BSS

48,18€

48,18€ ~~57,72€~~

Dash Socket 12V DC with Watertight Cap - Dash Socket 12V DC with Watertight Cap

Dash Socket 12V DC with Watertight Cap - Socket Dimensioned Drawing

Blue Sea Systems

12 V līdzstrāvas dashboarda ligzda ar ūdensnecaurlaidīgu vāciņu

Ref : 1011-BSS

13,96€

13,96€ ~~15,72€~~

Kit de conversion de panneau 360° - 12 à 24 V CC - 360 Panel Conversion Kit - 12 to 24V DC

Blue Sea Systems

360° paneļa konversijas komplekts — 12 uz 24 V līdzstrāva

Ref : 4113-BSS

10,56€

Alarme Floyd Bell Turbo Série - Floyd Bell Turbo Series Alarm

Blue Sea Systems

Signāls Floyd Bell Turbo sērija

Ref : 1070B-BSS

29,27€

29,27€ ~~34,98€~~

Frequently asked questions

Need help? Contact us

What type of lighting can the Deckhand 7506-BSS dimmer control?

The Deckhand 7506-BSS dimmer is designed to digitally control the brightness of unregulated LED lights, incandescent lights, and halogen lights.

What is the nominal operating voltage of this Blue Sea Systems dimmer?

This dimmer operates at a nominal voltage of 12 V DC.

What is the input voltage range accepted by the Deckhand 7506-BSS drive?

The Deckhand 7506-BSS drive operates within an input voltage range of 9 V to 16 V DC.

What is the maximum output current capacity of this inverter?

The maximum output current capacity of the Deckhand 7506-BSS inverter is 6 A.

What is the function of the integrated 'Bulb Saver' in the dimmer?

The 'Bulb Saver' function (bulb saver) is designed to prevent excessive aging of bulbs during charging phases of the boat's electrical system.

Does the dimmer store the last brightness setting?

Yes, the Deckhand 7506-BSS dimmer has a memory for the last brightness setting used.

What is the operating temperature range of this variable speed drive?

The variable speed drive is designed to operate across a wide temperature range, from -40 °C to 85 °C.

What is the maximum leakage current of the device?

The maximum leakage current of the Deckhand 7506-BSS drive is less than 2 mA.

What type of brightness control does the Deckhand dimmer use?

The dimmer uses continuous pulse-width modulation (PWM) control, allowing adjustment from 0 to 100 % of the input voltage.

Is this autopilot drive supplied with a switch?

Yes, the autopilot drive is supplied with a momentary (ON)-OFF-(ON) switch.

What are the physical dimensions of the Deckhand 7506-BSS autopilot drive?

The dimensions of the Deckhand 7506-BSS autopilot drive are:

Width: 3.25 inches (82.55 mm)Height: 3.5 inches (88.9 mm)

Is this drive compliant with safety and regulatory standards?

Yes, the Deckhand 7506-BSS drive is CE marked and meets the ignition protection requirements of ISO 8846 and SAE J1171.

Can I use this dimmer with LED lights that are already regulated?

No, this dimmer is specifically designed to control unregulated LED brightness. It may not work properly or could damage regulated LEDs.

Is this variable speed drive compatible with a 24 V DC electrical system?

No, model 7506-BSS is designed for 12 V DC systems. For 24 V DC systems, other models in the Deckhand range are available, such as PN 7504 or 7509.

Can this dimmer be used with other types of bulbs besides LED, incandescent, or halogen?

The dimmer is specifically designed for non-dimmable LED lighting, incandescent, and halogen bulbs. Using it with other types of bulbs is not guaranteed and may not function correctly.

How does the delayed dimmer switch off function work?

The illuminated output function keeps the lights on for an adjustable duration after the dimmer is turned off. Here’s how to set it:

1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds. The lights will flash. Release the switch after the first flash. The lights will stay on for 1 minute.2–5 minute delay: After the first flash, hold the switch in the high (illuminated) position for 1–4 seconds. Release the switch after 2–5 flashes. The lights will stay on for 1 minute per flash, up to a maximum of 5 minutes.

Is it possible to install multiple Deckhand drives side by side?

Yes, the Deckhand 7506-BSS drive is equipped with offset mounting feet that allow installing multiple drives very close to each other.

Does the dimmer support multiple switch locations for brightness control?

Yes, the Deckhand 7506-BSS dimmer is designed to support multiple switch locations, providing installation flexibility.

How to adjust the delay for the illuminated exit function?

To adjust the delay for the illuminated exit function:

For a 1-minute delay: Hold the switch in the high (illuminated) position for 2 seconds until the lights flash once. Release the switch.

For delays of 2 to 5 minutes: Hold the switch in the high (illuminated) position for 1 to 4 seconds after the first flash, then release the switch after the number of flashes corresponding to the desired minutes (e.g., 3 flashes for 3 minutes).

What are the main connections for installing the Deckhand dimmer?

The Deckhand dimmer's main connections are as follows:

+12V DC (red): Positive power supply.Ground (black): Ground.Lamp (blue): Connection to the lighting.Up Input (white): Input to increase brightness.Down Input (gray): Input to decrease brightness.A (ON)-OFF-(ON) switch is included for brightness control.