e-Series Selector 3 Position Battery Switch with AFD - e-Series Selector 3 Position Battery Switch with AFD

e-Series Selector 3 Position Battery Switch with AFD - Dimensioned Drawing

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Ietaupiet 10%

Blue Sea Systems

11001-BSS

Akumulatoru slēdzis BLUE SEA e-Sērija 3 pozīcijas ar AFD

L'interrupteur de batterie BLUE SEA e-Series Selector 3 Position avec AFD (11001-BSS) est une solution robuste pour la gestion de deux parcs de batteries sur les moteurs in-bord. Il offre une capacité continue de 350 A à 32 V DC et intègre une protection Alternator Field Disconnect pour l'alternateur. Conçu pour répondre aux exigences ABYC et UL, il garantit sécurité et fiabilité en milieu marin. Ce modèle fait partie de la gamme e-Series actuelle de Blue Sea, et est livré avec l'interrupteur seul.

Public priceGet pro pricing

72,24€

72,24€ ~~80,34€~~

TTC Piegāde aprēķināta maksājuma brīdī.

Noliktavā

Free pickup point from €150 in France
Collection at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of certified installers

Find an installer

Service d'assistance

Choose additional assistance for installation

Technical specifications

Produkta pielietojums	Gestion et isolation des parcs de batteries, démarrage d'urgence
Pārslēga tips	Sélecteur de batterie
Pastāvīgā strāva (A)	350
Pārtrauktais strāvas stiprums (A)	600
Starta strāva (A)	1200
Maksimālais līdzstrāvas spriegums	32
Pālu skaits	1
Pozīcijas	3
AFD aizsardzība	Oui
Savienojuma spailes tips	Goujon (cuivre étamé)
Savienojuma spailes izmērs	3/8"-16 (M10)
Kabeļu savienojuma tips	Cosses à œillet
Vadības tips	Manuel rotatif
Montāžas tips	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
IP indekss	IP66
Strāvas sprieguma darbības diapazons	Jusqu'à 32V DC
Paneļa izgriezuma diametrs (mm)	92.08
Darba temperatūras diapazons	-40 à +85 °C
Svars	0.52
Izmēri (G x A x D)	98 x 98 x 40.39
Garantija	99.0
Atbilstība ABYC	Meets all ABYC requirements
Aktuatora krāsa	Rouge
Actuator Feedback Type	Tactile
Aktuatora stils	Bouton rotatif
Alternator Diode Protection Mechanism	Réduction de la sortie de l'alternateur à zéro
Strāvas stiprums (A)	350
Battery Inputs Count	2
Cable Clearance Mm	27.9
Cable Entry Count	1
Cable Size To Meet Ratings Awg	4/0 AWG
Cable Size To Meet Ratings Mm2	120
Cable Terminal Torque Nm	24.86
Cranking Current Duration	30
Emergency Start Capability	Non
Saderīgais dzinēja tips	In-bord essence ou diesel
Flange Nut Material	Acier inoxydable
High Power Application Focus	Haute puissance, fiabilité et faible génération de chaleur
Ignition Protection Standard	SAE J1171, ISO 8846
Uzstādīšanas veids	Montage en surface / Montage sur panneau arrière / Montage sur panneau avant
Intermittent Current Duration	5
Gaismas indikators	false
Make Before Break Feature	Oui
Max Accepted Cable Size Mm2	120
Maksimālais bateriju skaits virknē	2.0
Maksimālā lādēšanas strāva (A)	350.0
Maksimālā izlādes strāva (A)	350.0
Mounting Area Required Sq In	15
Mounting Compatibility Brands	Perko, Guest
Mounting Hardware Type	Vis 1/4" (M6)
Montāžas orientācija	Montage en surface, sur panneau arrière ou sur panneau avant
Pīka izlādes strāva	1200.0
Produkta pielietošanas vide	Marin et embarqué
Produkta tips	Interrupteur de batterie
Recommended Cable Connection Method	Un câble 4/0 AWG à chaque borne batterie, deux câbles 4/0 AWG à la borne commune
Ieteicamā nepārtrauktā izlādēšanas strāva	350.0
Selector Positions Description	Batterie 1, Batterie 2, Arrêt
Uzglabāšanas temperatūras diapazons	-40 à +85 °C
Pārslēga funkcija	Sélection de batterie
Terminal Stud Length Mm	22.22
Terminal Stud Material	Cuivre étamé
Terminal Stud One Piece Design	Oui
Terminal Torque Nm	15.82
Ul Certification Standard	UL 1107, UL 1500
Warranty Period Text	Garantie à vie

Detailed description

Izstrādāts jūras un iebūvētu elektrisko sistēmu vajadzībām, BLUE SEA e-Sērija 3 pozīciju akumulatoru slēdzis ar AFD (preču numurs 11001) nodrošina drošu divu akumulatoru parku pārvaldību. Šis 3 pozīciju slēdzis (akumulatora 1, akumulatora 2, izslēgts) ir paredzēts augstas jaudas, pierādītas uzticamības un minimālas siltuma izdalīšanas prasībām, piemēram, laivās ar iebūvētiem benzīna vai dīzeļdzinējiem.

Rādītāji un Tehniskās Īpašības

Modelis 11001 nodrošina elektrotehnisko veiktspēju ar 1 200 A palaišanas strāvu 30 sekundēm. Tas iztur 600 A pārtraukuma strāvu (5 minūtes) un 350 A nepārtrauktu strāvu 32 V līdzstrāvā. Tā vaska virsmas ar 3/8"-16 (M10) izmēru nodrošina maksimālu vadītspēju un korozijas pretestību, ar 22,22 mm garumu, lai pieņemtu vairākus kabeļu uzmavas. Rekomendētais spēka moments ir 15,82 N·m (140 in-lb). Lai sasniegtu nominālās vērtības, nepieciešami kabeļi 4/0 AWG (120 mm²).

Papildfunkcijas un Atbilstība

11001 raksturīgā iezīme ir Alternator Field Disconnect (AFD) funkcija, kas aizsargā alternatora diodēm pret dzinēja palaišanas slēdža izslēgšanas gadījumiem, samazinot alternatora izlaidi līdz nullei. Šī aizsardzība ir būtiska, lai pagarinātu lādēšanas sistēmas mūžu. Slēdzis ir arī aizsargāts pret aizdegšanos (ignition protected), atbilstoši SAE J1171, UL 1500 un ISO 8846 prasībām, kas to padara drošu uzstādīšanai benzīna laivās. Tas atbilst ABYC prasībām akumulatoru slēdžiem un ir sertificēts UL 1107. Korpuss ļauj uzstādīt virsmas vai aizmugures panelī, nodrošinot uzstādīšanas elastīgumu. Atšķirībā no e-Sērijas 4 pozīciju vai Dual Circuit Plus modeļiem, šim slēdzim nav "make-before-break" funkcijas pārslēdzoties starp 1. un 2. banku, kas nozīmē, ka pirms bankas maiņas nepieciešams pārslēgt uz "OFF" pozīciju.

Documentation

Type	Nom
	EN - Instructions - e-Series Selector 3 Position Battery Switch with AFD
	EN - M Series, E Series, And Hd Series Battery Switch Ope... - e-Series Selector 3 Position Battery Switch with AFD
	EN - E Series Battery Switches - e-Series Selector 3 Position Battery Switch with AFD
	EN - Manual - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD
	EN - Certificate - e-Series Selector 3 Position Battery Switch with AFD

Expert review

Pol CONIN

Digitālās attīstības atbildīgais

« Technical analysis: BLUE SEA e-Series Selector 3-Position battery switch with AFD »

The BLUE SEA e-Series Selector 3-Position battery switch with AFD (model 11001-BSS) is a relevant solution for vessels equipped with two battery banks, typically a start bank and a house bank. Its primary function is to isolate these banks, allowing the user to select power from Battery 1, Battery 2, or cut all power in the OFF position. This is fundamental for electrical safety on board and energy management.

The major added value of this model lies in its Alternator Field Disconnect (AFD) system. This feature is crucial to prevent irreversible damage to the alternator diodes if the switch is toggled to OFF while the engine is running. Many competing switches or basic models in Blue Sea's m-Series lack this protection, requiring manual precautions or additional circuits. The integration of AFD simplifies installation and enhances the reliability of the charging system.

For installation, it must be mounted near the batteries and the specified torque values (15.82 N·m) for 3/8"-16 (M10) studs must be respected; these are tin-plated copper for better durability in marine environments. Using 4/0 AWG (120 mm²) cables is recommended to ensure nominal performance. It is critical to note that, unlike "make-before-break" switches (such as some Selector 4-Position or Dual Circuit Plus e-Series models), switching from "Battery 1" to "Battery 2" (or vice versa) must be done by passing through the "OFF" position to avoid any uncontrolled interruption of charge or discharge. This is a limitation to consider for systems that cannot tolerate any momentary power interruption. This model is ideal for owners seeking simple and secure management of two batteries with built-in alternator protection, without the complexity or cost of a four-position switch or Dual Circuit Plus if they do not require the direct combination function via the selector.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Akumulatoru slēdzis BLUE SEA e-Sērija 3 pozīcijas ar AFD

72,24€

72,24€ ~~80,34€~~

Complete your installation with

Complementary equipment

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - ML-ACR Automatic Charging Relay with Manual Control - 12V DC 500A

Relais de charge automatique ML-ACR avec contrôle manuel - 12V DC 500A - Wiring Diagram

Blue Sea Systems

Automātisks lādēšanas relejs ML-ACR ar rokas kontroli - 12 V līdzstrāva 500 A

Ref : 7622B-BSS

245,47€

245,47€ ~~362,28€~~

Blue Sea Systems

Ampērmetrs M2 DC

Ref : 1832-BSS

419,60€

419,60€ ~~466,08€~~

Mini ampèremètre OLED- Max 100A - Mini OLED Ammeter - Yellow

Blue Sea Systems

Mini ampērmetrs OLED — līdz 100A

Ref : 1732B-BSS

95,88€

95,88€ ~~116,82€~~

Frequently asked questions

Need help? Contact us

What are the main functions of the Blue Sea e-Series Selector 3-position battery switch with AFD?

The switch is designed to manage two battery banks. It allows isolation of the starter and service circuits, and offers the option to combine both battery banks for emergency starting. It has three positions: battery 1, battery 2, and off (OFF).

What does the 'AFD' (Alternator Field Disconnect) function mean on this switch?

The AFD (Alternator Field Disconnect) function is a distinctive feature that protects the alternator's diodes. If the switch is turned off while the engine is running, it reduces the alternator output to zero, which is essential for the durability of the charging system.

What is the DC current rating of this battery switch?

This switch has a DC current rating of 350 amperes at 32 V DC.

What is its cranking rating?

The cranking rating of this switch is 1 200 amperes for 30 seconds.

Is the switch ignition-protected for use on gasoline-powered boats?

Yes, this switch is ignition-protected. It meets the requirements of SAE J1171, UL 1500, and ISO 8846 standards, making it safe for installation on boats with gasoline engines.

Which types of boats are best suited to this battery switch?

This switch is specifically designed for marine applications requiring high power, proven reliability, and low heat generation, such as on boats equipped with inboard gasoline or diesel engines.

What material are the terminal studs made of and what are their dimensions?

The terminal studs are made of tinned copper, ensuring maximum conductivity and corrosion resistance. They have a size of 3/8"-16 (M10) and a length of 22.22 mm (7/8") to accept multiple cable lugs.

What is the maximum operating voltage of this switch?

The maximum operating voltage of this switch is 32 V DC.

What are the certifications and compliance standards for this product?

This product complies with ABYC requirements for battery switches, is UL listed (UL 1107 for electrical power switches), and meets external ignition protection requirements UL 1500 and SAE J1171. It is also CE and ISO 8846 certified.

Is the switch water-resistant?

Yes, the switch is rated IP66, meaning it is protected against powerful water jets.

What is the intermittent current rating of this switch?

The switch has an intermittent current rating of 600 amperes for 5 minutes, in accordance with UL 1107.

Where should I install this battery switch?

Install the switch in an easily accessible location close to the batteries.

What are the possible mounting types for this switch?

The switch housing design allows for surface mounting or rear-panel mounting.

What is the recommended cable gauge for this switch to comply with its rated values?

To fully comply with the switch's rated values, 4/0 AWG (120 mm²) cables must be used.

How to connect battery cables to the switch terminals?

To meet the rated value, a 4/0 AWG (120 mm²) cable must be connected to each battery terminal and two 4/0 AWG (120 mm²) cables to the common terminal. Battery cable lugs must be secured under the lock washer and nut.

What is the recommended torque for the switch terminal studs?

The recommended torque for the switch terminal studs is 15.82 N·m (140 in-lb). For battery cable terminals secured under the nut, the torque is 24.86 N·m (220 in-lb).

What precautions should I take before installing the battery switch?

Before installation, it is imperative to disconnect the positive terminal of the battery. It is also strongly recommended to consult a marine electrical professional to ensure correct and secure wiring.

How to wire the AFD (Alternator Field Disconnect) function?

To wire the AFD function, disconnect the wire running from the alternator to the voltage regulator. Connect one end to terminal F1 and the other end to terminal F2 of the switch.