Maza kopējā omnibusu šīna 100 A - 5 spailes ar vāku

A busbar is a common connection point for multiple electrical cables, used to centralize power distribution or grounding. The Blue Sea 2314B-BSS model is a compact busbar designed to group up to five conductors, simplifying wiring and maintenance of marine electrical systems, particularly in confined spaces.

This Blue Sea 2314B-BSS mini busbar has a rated capacity of 100 amperes, making it suitable for distributing power in marine auxiliary circuits.

The Blue Sea 2314B-BSS mini busbar has 5 connection terminals, allowing up to five conductors to be grouped.

Yes, this mini bus bar is delivered with a protective cover. The cover helps isolate connections, prevent accidental short circuits, and protect against water spray or impacts.

Using a busbar with a cover offers several advantages, including increased safety by protecting connections from accidental contact and short circuits. The cover also helps protect against the marine environment (splashing, dust) and provides a cleaner finish to the electrical installation.

Yes, this busbar is specifically designed for marine applications. It complies with the European Directive 94/25/EC on recreational craft and ISO 8846, ensuring protection against ignition of surrounding flammable gases, a critical safety criterion at sea.

The connection terminals on this mini busbar use 8-32 screws.

This mini busbar is ideal for small sailboats, rigid inflatables, or for managing secondary circuits on larger vessels. Its compact design makes it particularly suitable for installations where space is limited.

Yes, the Blue Sea 2314B-BSS mini busbar can be used interchangeably to centralize grounds (negative connections) or positive power supplies, depending on the requirements of your electrical installation.

Blue Sea Systems busbars are generally manufactured with tinned copper conductors for excellent conductivity and corrosion resistance in marine environments, and a base made of reinforced polycarbonate for durability and insulation.

Installing this mini busbar requires securing it firmly to a flat surface using screws (not supplied). Once secured, the auxiliary circuit cables can be connected to the terminals using appropriate ferrules, then the protective cover can be snapped into place.

To connect the cables, you will need basic tools such as a screwdriver suitable for 8-32 screws, and a crimping tool to properly secure the terminals on your cables. It is recommended to use ring or fork terminals that match the size of the terminal screws.

This busbar is designed to support a maximum voltage of 48 Volts DC (direct current), which is standard for most marine electrical systems.

Yes, thanks to tinned copper conductors and corrosion-resistant plastic materials for the base and cover, this busbar is designed to provide good corrosion resistance in a marine environment.

It improves safety by centralizing connections in an organized manner, thereby reducing the risks of messy wiring and short circuits. The protective cover also insulates the live terminals. Additionally, its compliance with ISO 8846 ensures protection against ignition of flammable gases.

Although designed for marine use, its robustness and resistance to moisture also make it suitable for automotive, RV, or other vehicles where reliable and protected electrical distribution is required, within its current and voltage specifications.

Yes, its designation "Mini NMEA 2000 backbone" indicates a compact design. It is specifically suited for installations where space is limited, making it easier to integrate into electrical panels or tight compartments on boats.

To ensure a proper connection, it is crucial to use the correct size of terminals, crimp them properly onto the cables, and tighten the terminal screws (size 8-32) firmly without overtightening to avoid damaging the threads. Using cables with an adequate cross-section for the current carried is also essential.

Yes, this product is certified compliant with the European Directive 94/25/EC on recreational craft (amended by 2003/44/EC) and ISO 8846. This compliance ensures protection against ignition of surrounding flammable gases, a critical aspect for safety in marine environments.

The main difference lies in the number of terminals and physical size. The 2314B-BSS model is a "mini" busbar with 5 terminals, ideal for compact installations or auxiliary circuits. Larger models, such as the 2312 (which has 20 terminals according to the product description), are designed for more extensive electrical distribution needs and require more space.