ST Blade drošības bloka ierīce ar montāžu uz baterijas poliem

The ST Blade Blue Sea 5023-BSS fuse block is designed to easily add up to four fuse-protected circuits directly to a battery terminal. It allows you to power new accessories on your boat or vehicle in a safe and organized manner.

This fuse block is designed for direct mounting on a 3/8" (M10) battery terminal stud. It secures firmly to the battery terminal.

The ST Blade Blue Sea 5023-BSS fuse block is compatible with ATO or ATC type fuses.

No, ATO or ATC type fuses are sold separately and are not included with the 5023-BSS block.

Each individual circuit in this fuse block can support a maximum current rating of 30 amperes.

The ST Blade Blue Sea 5023-BSS fuse block can handle a maximum total current of 100 amperes.

The maximum operating voltage of this fuse block is 32V DC (direct current).

The internal bus of the fuse block is made of tinned copper C11000, ensuring excellent conductivity and good corrosion resistance.

The 5023-BSS fuse block is supplied with the following accessories:

Four insulated nylon ring terminals for 16-14 AWG wire. Four insulated nylon ring terminals for 12-10 AWG wire. Four write-on circuit labels for clear identification.

The fuse block uses #8-32 screw terminals with captive washers for secure wire connections.

Yes, this fuse block is ignition-protected and can be used in a gasoline engine compartment. It meets the external ignition protection requirements of ISO 8846 and SAE J1171.

Yes, the fuse block insulating cover meets ABYC/USCG insulation requirements, providing additional protection.

Main dimensions of the fuse block are as follows:

Total length: 91.3 mm (3.59 inches).Total width: 56.7 mm (2.23 inches).Height (above mounting surface, including cover): approximately 43.8 mm (1.73 inches).The opening for the battery terminal stud is 10.1 mm (0.40 inches) in diameter for a 3/8" (M10) stud.

Model 5023-BSS is the fuse block only. Model 5024 is a kit that includes the same type of fuse block, but also pre-assembled fuses and cables for faster installation.

Yes, thanks to its tinned copper busbar (C11000) resistant to corrosion and its compliance with ABYC/USCG and ISO 8846 standards (ignition protection), it is perfectly suited and designed for the marine environment.

This fuse block allows adding up to four fuse-protected circuits.

The 5023-BSS fuse block is designed for simplified installation. It mounts directly onto a battery terminal stud and uses screw terminals to connect wires, making the process relatively straightforward for anyone with basic knowledge of marine or automotive electrical systems.

Yes, although designed for marine applications, this fuse block is also suitable for use in land vehicles (RVs, campervans, etc.) where you wish to add accessories directly to the battery.

The block comes with four writable circuit labels. Standard and small-format custom labels are also available separately for more specific circuit identification.

Yes, the 5023-BSS fuse block is compliant with Directive 2013/53/EU for recreational craft and personal watercraft, and with ISO 8846 for protection against ignition of surrounding flammable gases. It has received a CE type examination certificate.