Bezvadu tālvadības komplekts bezvadu slēdžu baterijām modeļiem 701-MD un 720

This kit is a wireless remote control solution designed for marine electrical systems. It allows remote operation of the BEP 701-MD and 720-MDO motorized battery switches, as well as up to four separate 5-amp auxiliary circuits.

This kit is specifically designed to control the BEP 701-MD and 720-MDO motorized battery switches.

Yes, in addition to battery switches, the kit can control up to four separate 5-amp circuits. This may include devices such as anchor lights, navigation lights, or courtesy lights.

The system provides a wireless operating range of up to 80 meters (250 feet), offering high flexibility for use aboard your vessel.

The CZone 80-911-0045-00 kit comes with two key fob remotes, in addition to the receiver.

Each command is secured by the integration of a rotating code, which minimizes the risks of interference or unauthorized activation.

This kit is a targeted extension for specific functions, particularly for BEP battery switches. It is not a complete CZone system with interface modules or multifunction displays, but a practical alternative for adding remote controls to specific circuits.

You can control up to four separate circuits, each with a maximum current of 5 amperes.

The kit comes with a receiver and two key fob remotes. Specific wiring for your installation will be required to connect the receiver to the battery switches and auxiliary circuits of your existing marine electrical system.

Installing this kit involves electrical connections to your marine system. It is recommended to use a qualified professional to ensure correct and safe installation, especially if you are not familiar with marine electrical work.

Yes, this kit provides a significant ergonomic improvement over traditional wired controls or direct access to switches by enabling remote wireless control.

No, this kit is specifically designed to work with BEP 701-MD and 720-MDO motorized battery switches. Compatibility with other brands is not guaranteed.

The kit's receiver must be connected to your boat's 12V or 24V electrical system to operate. The key fob remotes run on batteries.

CZone products are generally designed for the marine environment. It is advisable to ensure the receiver is installed in a location protected from direct water spray and harsh weather to ensure its durability.

No, each auxiliary circuit controlled by this kit is limited to a maximum of 5 amps. Attempting to control higher-power circuits could damage the device or create an electrical hazard.

This kit is designed as an extension for existing installations equipped with compatible BEP switches. It can complement a more complex CZone system by providing remote control for specific functions, but it does not integrate directly as a standard CZone module.

To optimize the 80-meter wireless range, it is recommended to place the receiver in an unobstructed location, away from major metal obstructions that could interfere with the radio signal.

Yes, a user or installation manual is standard for this type of CZone product to guide integration into your marine electrical system.

This kit allows remote control of the BEP 701-MD and 720-MDO motorized battery switches. It also enables control of up to four separate 5-amp circuits, such as anchor lights, navigation lights, or courtesy lights. The system provides a wireless operating range of up to 80 meters (250 feet) and includes a rotating code for secure command transmission.

This CZone wireless remote control kit is specifically designed to be compatible with BEP 701-MD and 720-MDO motorized battery switches. It is intended to complement existing installations already equipped with these BEP switch models.