Slēdzis ar iedziļņojumu ON/OFF un sarkanu LED, 3,3 V

This push button is designed to reliably control circuits within a CZone digital switching system. It allows you to turn on or off specific functions aboard your boat or recreational vehicle, with visual feedback provided by its integrated red LED.

This CZone push button operates specifically at a voltage of 3.3V. It is designed to be integrated exclusively into CZone networks that provide this voltage.

An ON/OFF (or latched) button retains its state (on or off) after being pressed, until it is pressed again. A momentary button, on the other hand, only maintains its state (on or off) while it is held down, and returns to its initial state as soon as it is released. This model is an ON/OFF button.

To install this CZone push button, a mounting hole with a diameter of 19 mm is required.

This push button is made of stainless steel, providing excellent durability and increased corrosion resistance, essential in marine environments.

The push button has an IP67 ingress protection rating. This means it is fully protected against dust and can withstand temporary immersion in water (up to 1 meter for 30 minutes), making it ideal for marine and outdoor environments.

Yes, the integrated red LED provides a direct visual feedback on the status of the circuit controlled by the button. It typically illuminates when the circuit is activated (ON) and turns off when deactivated (OFF).

No, this push button is specifically designed to operate at 3.3V and is exclusively compatible with CZone digital switching networks. It must not be used with non-CZone systems.

This push button has a maximum current rating of 5 amperes.

Yes, absolutely. Its stainless steel construction and IP67 rating ensure high resistance to saltwater, dust, and the demanding conditions typical of marine environments.

This button is designed for direct integration into CZone digital switching systems. Connection is typically made via the specific CZone network wiring, allowing the button to communicate with the appropriate CZone module to control circuits.

The button itself operates at 3.3V and integrates into a CZone network. The CZone system, however, can control devices running on 12V or 24V voltages via its output modules. The button acts as a control interface for the CZone system, which then manages the power supply to the devices.

This is a physical push button, requiring mechanical pressure to change state (ON/OFF).

Although the product is designed for CZone integration, specific wiring instructions for your installation can be found in the technical documentation of your CZone system or by a marine installation professional. The button connects to the CZone network.

Made of stainless steel with IP67 protection, this button is designed for high durability and long service life, even in harsh environmental conditions such as those encountered at sea or in recreational vehicles.

It is part of the CZone user interface range, providing a physical control method for circuits. It complements the touchscreens and other CZone panels for complete and centralized electrical management aboard.

The red LED is integrated into the push button. If the LED fails, the entire button assembly typically needs to be replaced to restore the lighting function.

Yes, absolutely. Its robustness, water resistance (IP67), and compatibility with CZone systems make it an ideal solution for electrical control applications in recreational vehicles, where reliability and durability are critical.

This specific model (reference 80-911-0063-00) is equipped with a red LED. Other CZone button models or variants may exist with different LED colors, but this product is only available with a red LED.

Yes, the manufacturer's standard warranty typically covers material and manufacturing defects.