Airmar B164 – bronzas caurlaides sonda 1 kW (50/200 kHz) ar slīpā elementu (20°) + temperatūras sensors – (8 kontakti)

The Airmar B164 transducer operates on two frequencies: 50 kHz and 200 kHz. This dual-frequency capability provides versatility for deep-water detection and target discrimination.

The Airmar B164 transducer features a 20° tilted element. This Tilted Element™ technology compensates for your boat's deadrise angle to ensure a vertical sonar beam without requiring an external compensation shoe.

Yes, the Airmar B164 transducer is equipped with a fast-response temperature sensor.

The bronze housing of the Airmar B164 transducer is specifically recommended for fiberglass or wooden hulls. It is critical never to install a bronze housing in an aluminum hull, as this would cause electrolytic corrosion.

The Airmar B164 transducer can detect depths up to 549 meters at 50 kHz and up to 244 meters at 200 kHz.

The beam width of the Airmar B164 transducer is 22° at 50 kHz and 6° at 200 kHz (measured at -3 dB).

The Airmar B164 transducer has a low-profile design that protrudes less than 6.35 mm below the hull. This reduces drag and eases trailer rollover, making it ideal for fast sportfishing boats.

The Airmar B164 transducer is supplied with a 10.4-metre (34-foot) cable.

The Airmar B164 transducer is equipped with an 8-pin Garmin connector, ensuring direct compatibility with Garmin devices.

The Airmar B164 transducer, with its 20° tilted element, is designed to compensate for deadrise angles ranging from 16° to 24°. It is important to ensure that the tilt angle of the transducer matches the deadrise angle of your hull at the chosen mounting location.

For installation of the Airmar B164 transducer on a fiberglass or wooden hull, a 95 mm (3-3/4 inches) diameter hole must be drilled.

Yes, marine sealant is mandatory. It must be applied to the threads of both adjustment screws to keep the hull nut firmly in place. Additionally, it is recommended to apply marine sealant to the entire inner surface of the spacer to fill the gap and prevent vibrations.

During installation, the arrow on the top of the transducer must point toward the keel or the boat’s centerline. This ensures the internal element’s angle aligns with the hull’s deadrise angle.

Yes, the Airmar B164 transducer’s low-profile design (less than 6.35 mm below the hull) and its ability to compensate for hull angles make it ideal for fast sportfishing boats up to 11 meters, including trailerable vessels.

Yes, foul-release coatings such as Foulfree® can be applied. Airmar certifies that applying Foulfree to its depth sounders does not result in any performance loss. This non-toxic and durable coating prevents marine growth from adhering to the transducer surface, ensuring optimal performance.

The main difference lies in the housing material: the B164 has a bronze housing and is intended for fiberglass or wooden hulls. The SS164 has a stainless steel housing and is compatible with all hull materials, including metal hulls (with appropriate insulation).

No, the Airmar B164 is a traditional dual-frequency transducer (50/200 kHz). While the installation manual mentions CHIRP models, the B164 itself is not a CHIRP model.

Yes, it is imperative never to use solvents. Cleaners, fuels, sealants, paints and other products may contain solvents that can damage plastic parts, particularly the face of the depth sounder.