LiveScope™ Plus, zonde LVS34 tikai

The Garmin LiveScope™ Plus LVS34 transducer is an advanced real-time sonar technology that provides exceptionally clear and precise underwater vision. It is designed for anglers and sailors seeking improved identification of fish and underwater structures. This transducer is sold separately, allowing you to upgrade an existing LiveScope system or replace a faulty one.

The LVS34 transducer is compatible with Garmin multifunction displays from the ECHOMAP Ultra and GPSMAP series.

Note that the LVS34 transducer requires the LiveScope GLS 10 sonar module to operate. This module is sold separately and is not included with the LVS34 transducer alone.

To achieve optimal performance from the LVS34 transducer, consider the following mounting guidelines:

Avoid mounting the transducer in the propeller wash path. For boats with outboard or sterndrive engines, mount the transducer on the side of the propeller’s downward thrust, typically starboard. Select a location where the transducer will not be struck during launching, towing, or storage. Ensure the transducer is not behind frames, stiffeners, fittings, exhaust outlets, or other hull-penetrating transducers, as these can create air bubbles or turbulence that interfere with the sonar beam. Mount the transducer as close as possible to the boat’s centerline. On twin-engine boats, mount the transducer between the engines if possible.

These guidelines apply to most hull materials, including fiberglass, aluminum, and wood.

For best results, use the provided fairing block to ensure proper alignment and minimize turbulence.

Refer to the LVS34 installation manual for detailed instructions and safety precautions.

Failure to follow these guidelines may result in degraded sonar performance or damage to the transducer.

Contact our technical support team if you require assistance with installation.

The LVS34 transducer, integrated with LiveScope Plus technology, delivers significant improvements over the previous LiveScope generation (LVS32). These include:

A significantly higher real-time sonar image resolution, providing superior visual clarity.

Enhanced noise reduction, resulting in cleaner, less cluttered images.

Better target separation, making it easier to distinguish fish from underwater structures, even at extended depths and ranges.

These advancements enable clearer interpretation of underwater conditions.

Yes, the LVS34 transducer is designed as an upgrade for existing LiveScope systems. If you already own the LiveScope GLS 10 sonar module, you can replace your LVS32 transducer with the LVS34 to benefit from the LiveScope Plus technology improvements.

The LVS34 transducer is sold separately specifically to allow users to upgrade their existing installation without having to purchase a complete system.

Yes, it is mandatory to update the software on your Garmin display (chartplotter or fishfinder) after installing the LVS34 transducer. This update ensures compatibility and proper operation of the new transducer with your device. You can find the software update instructions in your display's user manual.