Tīkla adapteris RJ45 sievišķā uz BlueNet sievišķo

The Garmin network adapter cable 010-12531-11 is a component designed to facilitate system integration by allowing Garmin devices with a BlueNet connector to connect to systems using Garmin's older marine network, known as Legacy Garmin Marine Network. It ensures compatibility between existing network technologies and Garmin BlueNet innovations.

This adapter is specifically designed to bridge the physical connectivity difference between the Garmin BlueNet network, which uses compact and water-resistant connectors, and the Legacy Garmin Marine Network, which uses standard RJ45 connectors. It provides a direct connection between the female RJ45 ports of Legacy devices and the female BlueNet ports of BlueNet devices or cables.

This adapter has a female RJ45 connector and a female BlueNet connector. The RJ45 connector is the standard type used by the old Garmin Marine Network, while the BlueNet connector is a compact, waterproof connector, similar in size to an NMEA 2000 connector, designed for the marine environment.

The main differences lie in connection speed, cabling type, and connectors:

The Garmin BlueNet offers connection speeds up to 1 Gbps and uses compact, water-resistant connectors with 4-pair twisted cable combining data and Wake on Lan (WoL) functionality. The Legacy Garmin Marine Network uses standard RJ45 connectors, less suited to marine environments and requiring large locking clamps, with 2-pair twisted cable for data and 2 pairs for power functionality.

Garmin BlueNet connectors are specifically designed for marine environments. They are compact, water-resistant, and simplify routing and connection maintenance. In contrast, standard RJ45 connectors, while an industry standard, are less suited to marine use and require large waterproof locking clamps for adequate protection.

The adapter itself is designed to facilitate connections between systems. BlueNet connectors are inherently waterproof and compact, suitable for the marine environment. However, the standard RJ45 connector, used by the Legacy Garmin Marine Network, typically requires locking collars for adequate water protection. It is important to ensure the overall installation is properly protected.

The adapter is designed to establish a physical link between the two connector types (female RJ45 and female BlueNet). It is not an active device that processes the signal in a specific direction, but a wiring adapter. The logical connection direction will depend on the devices you wish to interconnect (for example, a BlueNet device to a Legacy network via this adapter).

This adapter is compatible with Garmin devices featuring a BlueNet port (such as certain OnDeck GTB 10 hubs, compatible Fusion PartyBus™ stereos, or IP cameras) and Legacy Garmin Marine Network systems or cables using standard RJ45 connectors. It bridges these two types of connectors.

No, a Legacy Garmin Marine Network device cannot be directly connected to a Garmin BlueNet chartplotter or a Garmin BlueNet 20 switch. This would result in poor network performance. To connect Legacy devices to a BlueNet network, you must use a Garmin BlueNet 30 gateway. The 010-12531-11 adapter handles the physical cable conversion, but the BlueNet 30 gateway is required for network compatibility.

The adapter itself handles the connector conversion. Garmin BlueNet devices are compatible with third-party devices, such as IP cameras, without requiring a Garmin Marine Network PoE isolation coupler. If your IP camera uses an RJ45 connector and you wish to connect it to a BlueNet system via a Legacy cable, this adapter can be used for connector conversion, in conjunction with a BlueNet 30 gateway if network integration is required.

Yes, if you want to connect Legacy Garmin Marine Network devices to a Garmin BlueNet network, a Garmin BlueNet 30 gateway is required. This adapter (010-12531-11) handles the physical conversion of connectors (RJ45 to BlueNet), while the BlueNet 30 gateway ensures compatibility and communication between the two network protocols.

This adapter is a connector converter. It can be used to connect cables or devices compatible with RJ45 to cables or devices compatible with BlueNet. If a GMS 10 (Legacy) switch needs to connect to a BlueNet network via a BlueNet 30 gateway, this adapter can be used for the physical link if the connectors do not match directly. Similarly, if a BlueNet device connects to a BlueNet 20 switch, this adapter can be used if the BlueNet device has an RJ45 output (which is unlikely for a native BlueNet device, but possible in specific integration scenarios). The adapter is a physical link.

No, absolutely not. While Garmin BlueNet connectors are similar in size to NMEA 2000 connectors, they are not identical and are not interchangeable. This adapter is specifically designed to convert between Legacy Garmin Marine Network RJ45 connectors and Garmin BlueNet connectors. It is not compatible with the NMEA 2000 network.

This adapter is useful for connecting certain Garmin BlueNet devices, such as OnDeck GTB 10 hubs, Fusion PartyBus™ compatible stereos, or IP cameras, to systems using the Legacy Garmin Marine Network. It is essential for hybrid setups where BlueNet devices must interact with the older network via a connectivity conversion.

You can identify the ports and connectors by examining them:

Garmin BlueNet ports are compact, similar in size to NMEA 2000 connectors, and may be entirely black on older devices or blue on newer ones. Legacy Garmin Marine Network ports use standard RJ45 connectors, which are larger and resemble common Ethernet network connectors, requiring large locking clamps.

For a hybrid network, the 010-12531-11 adapter will be used to convert the connection between a Legacy RJ45 cable and a BlueNet port (or vice versa, depending on the integration direction). It is critical to note that a Garmin BlueNet 30 gateway is required for communication between Legacy devices and the BlueNet network. The adapter plugs into one of the ports on this gateway or on a compatible device to perform the physical cable transition.

Yes, you must include a Garmin BlueNet chartplotter, such as a GPSMAP 9000 series unit, when creating a Garmin BlueNet network. The Garmin BlueNet 30 gateway, essential for communication between Legacy and BlueNet networks, is not required without a Garmin BlueNet chartplotter. The 010-12531-11 adapter is a physical component of this network.

The adapter must be placed where a connector conversion is required between a Legacy Garmin Marine Network cable or device (RJ45) and a Garmin BlueNet cable or device. For example, it could be used to connect an RJ45 Legacy cable to a BlueNet port on a BlueNet 30 gateway, or to another BlueNet-compatible device if its input port is BlueNet type and the cable coming from the Legacy device is RJ45.

Yes, although BlueNet connectors are water-resistant, the Legacy Garmin Marine Network RJ45 connectors require locking collars for adequate protection. It is important to ensure all connections are properly secured and protected from moisture and corrosion, following marine installation best practices, to guarantee network reliability.

You can use as many 010-12531-11 adapters as needed for individual wiring conversions between RJ45 cables and BlueNet ports. However, it is critical to follow Garmin’s network architecture rules, including using only one Garmin BlueNet 30 gateway per mixed network and proper connection practices for Legacy and BlueNet devices to the correct switches. The adapter is a port conversion tool, not an active network component.