Eholots Lowrance Eagle 9 bez eholota

The Lowrance Eagle 9 is equipped with a single transducer port compatible with the following Lowrance transducers (sold separately):

SplitShot™ transducerTripleShot™ transducerUsing one of these transducers enables the fishfinder functions of the unit.

The Lowrance Eagle 9 screen measures 9 inches diagonally. It delivers a resolution of 1024 x 600 pixels, ensuring a sharp and detailed display.

No, this version of the Lowrance Eagle 9 (reference 000-16231-001) is specifically sold without a transducer. This is an ideal solution if you already own a compatible transducer or if you want to select one suited to your fishing practice.

The Lowrance Eagle 9 features a card reader compatible with microSD cards. The maximum supported capacity for the card is 32 GB.

Yes, the Eagle 9 display is designed for excellent readability even in full sunlight. It features wide viewing angles of 85 degrees (up, down, left, and right), allowing you to clearly see the screen from various positions.

A 3-ampere fuse is recommended on the power line of your Lowrance Eagle 9 to protect it from voltage spikes.

Yes, this unit is waterproof with an IPX7 rating. This means it is protected against accidental immersion in water up to 1 meter deep for 30 minutes.

By connecting a compatible transducer (sold separately), the Lowrance Eagle 9 can display multiple views:

CHIRP sonar: For clear fish detection shown as arcs.DownScan Imaging™: For a highly detailed, near-photographic view of structures and the seabed directly beneath your boat.SideScan Imaging™: To scan wide areas on either side of your boat and spot structures (requires a TripleShot™ transducer).

Yes, the Lowrance Eagle 9 integrates a precise GPS receiver. It allows you to navigate, mark waypoints, create routes, and record your tracks without requiring an external antenna.

To instantly create an emergency waypoint 'Man Overboard' (MOB), simply press the Zoom in (+) and Zoom out (-) buttons simultaneously on the device.

The maximum power consumption of the Lowrance Eagle 9 is 7.68 W, equivalent to a current draw of 640 mA at 12 V DC.

The Lowrance Eagle 9 comes with a mounting bracket and screws, allowing you to install it easily on a flat surface of your console. A flush-mount installation in the dashboard is also possible with a specific mounting kit (sold separately).

The weight of the Lowrance Eagle 9 screen, without its bracket or cables, is 0.9 kg (1.98 lb).

Yes, the Eagle 9 is a full-featured chartplotter. With its microSD card reader, you can load detailed marine charts (sold separately) to improve navigation accuracy.

The Lowrance Eagle 9 is designed to operate in temperatures ranging from -15°C to +55°C (5°F to 131°F).

For cleaning, use a soft cloth dampened with warm water and a drop of dish soap. Gently wipe the screen and housing. Important: Never use high-pressure cleaners, chemical solvents, or abrasive products.

This version is ideal if you want to replace an old Lowrance display while keeping your existing SplitShot™ or TripleShot™ transducer. It's also a great choice for anglers who prefer to select a specific transducer perfectly suited to their needs rather than one included in a standard bundle.

The Lowrance Eagle 9 without transducer (000-16231-001) box contains the following:

The Eagle 9L combined displayMounting bracket with tightening knobsPower cableNote: The transducer is not included and must be purchased separately.

Although this model is supplied without a transducer, it is fully compatible with Lowrance SplitShot™ and TripleShot™ transducers thanks to its single connection port. Adding a TripleShot™ transducer, for example, will allow you to benefit from traditional CHIRP views as well as high-resolution DownScan Imaging™ and SideScan Imaging™.

Yes, the Lowrance Eagle 9 integrates a precise GPS receiver for navigation assistance. It also features a microSD card reader (supporting up to 32 GB capacity), allowing you to insert and use a wide range of detailed marine charts to log waypoints, routes, and tracks.

The Lowrance Eagle 9 display operates on a standard 12 V DC power supply (accepted range: 10.8 to 18 V DC). Its maximum power consumption is 7.68 W (640 mA at 12 V DC). To ensure a safe electrical installation, use a 3 A fuse.