Ekrāns EasyView 5

The Mastervolt EasyView 5 is a 4.3-inch touch control and monitoring panel designed to provide an intuitive and centralized user interface within MasterBus networks. It allows you to control, configure, and monitor all connected MasterBus-compatible devices.

The EasyView 5 is equipped with a 4.3-inch capacitive touch color screen. It is designed to be readable in full sunlight and offers high contrast with a 16-bit color depth.

Yes, the front panel of the EasyView 5 is waterproof with an IP67 rating, making it resistant to water, humidity, and dust.

The dimensions of the EasyView 5 are 113 mm (height) x 127 mm (width) x 43 mm (depth).

The weight of the EasyView 5 is 0.315 kg (approximately 0.7 pounds).

The EasyView 5 display supports multiple languages, including:

EnglishDutchGermanSpanishItalianFrenchFinnishSwedishNorwegianDanish

The EasyView 5 comes with the following accessories:

An anti-UV protective coverA flush-mount frameA 6-meter MasterBus cableA MasterBus connectorA 12/24 V connectorFour mounting screws (4x30 mm PH2)Four mounting screws (4x14 mm PH2)

Yes, the EasyView 5 includes an audible alarm for alerts and features a notification and alarm log that provides a useful history of events for your system's operation.

The EasyView 5's screen has a resolution of 480 x 272 pixels.

Yes, the EasyView 5 allows customizing favorite pages by adding widgets to display system information or commands according to your preferences. You can create practical pages to control your installation.

The EasyView 5 can operate in an ambient temperature range from -20 °C to 70 °C (i.e., -4 °F to 158 °F).

The EasyView 5 offers three installation options:

Surface mounting: in the wall-mounting box.

Flush mounting: in an opening of 82 x 113 mm.

Sandwich mounting: for larger openings (> 82 x 113 mm), using the wall box as a clamping element.

The EasyView 5 can be powered in two ways:

Via the MasterBus network: if MasterBus power devices are connected and provide sufficient power to the network.
Via a 12/24 V auxiliary input: through the supplied connector, if MasterBus power is insufficient or unavailable. The accepted voltage range is 9 to 32 V.

Yes, it is mandatory to insert a 1 A fuse in the positive battery line when connecting the auxiliary power supply of the EasyView 5.

To connect the auxiliary power supply to the battery, the recommended cable cross-section is:

Minimum: 1 mm² (18AWG)Maximum: 2.5 mm² (13AWG)

No, the EasyView 5 is not protected against reverse polarity. It is critical to connect the battery to the device correctly to avoid any damage.

The EasyView 5 is compatible with MasterBus network from Mastervolt. It is designed to ensure communication between various Mastervolt devices and acts as a centralized control panel for all connected MasterBus equipment.

Up to 63 MasterBus-compatible devices can be connected on the same network.

Yes, the EasyView 5 has power supply features for the MasterBus network, provided its auxiliary power is connected to the battery. At least one device on the network must have power supply capabilities.

Mastervolt grants a two-year warranty on the EasyView 5 product from the date of purchase. This warranty is valid provided the product is installed and used in accordance with the instructions in the provided manual.