Mass Sine 24/2500 pārveidotājs (230V/50Hz)

The Mass Sine 24/2500 converts 24V DC power from your battery bank into 230V AC / 50Hz power. It supplies your boat's domestic electrical appliances with high-quality AC power.

This model delivers a nominal continuous power output of 2000W at 40°C. It can also supply up to 2500W for a duration of 30 minutes (at 40°C), which is ideal for temporary high loads.

The exceptional 5000W peak capacity enables smooth start-up of highly inductive equipment. This includes devices requiring a high inrush current at startup, such as electric motors, compressors, or air conditioning systems.

Yes, it generates a pure sine wave (50Hz frequency ± 0.1%). This power quality is essential to ensure proper operation of sensitive electronic equipment and prevent interference or failures.

The inverter has a robust aluminium chassis. Its dimensions are 420 x 318 x 130 mm (height x width x depth) and it weighs 10.1 kg.

The Mass Sine 24/2500 has an IP23 protection rating. It is protected against solid objects larger than 12.5 mm and against rainwater at angles up to 60° from vertical. It must be installed in a dry, well-ventilated area.

To protect your batteries, the inverter will automatically shut down if the voltage drops to 19V (±0.5V). It will restart automatically once the voltage rises back to 22V (±0.5V) following recharging.

Yes, absolutely. Thanks to its massive power reserve and 5000W peak power, it is perfectly suited to handle the startup surges of marine compressors and air conditioning systems.

For a distance up to 2 meters between the batteries and the inverter, it is recommended to use 2x 50 mm² cables to ensure optimal conductivity and avoid losses.

Yes, it integrates seamlessly with the MasterBus ecosystem. To do this, you will need a dedicated interface (such as the MasterBus Converter Interface or the AC Power Analyzer) to monitor voltage, current, and load.

No, this specific model (reference 24022500) is designed exclusively for 24V battery banks. If you have a 12V installation, you will need to choose the Mass Sine 12/2000 model instead.

Yes, for a secure and code-compliant installation, the ground wires (PE/GND) and the neutral (N) on the inverter’s output must be grounded.

To properly and safely secure the DC input cables from the battery, the manufacturer recommends using a 13 mm socket wrench.

The converter is designed to operate within a temperature range of -25°C to 80°C. However, note that above 40°C ambient temperature, a power derating occurs automatically to protect internal components from overheating.

Yes, you can connect a remote control panel. This model is compatible with Masterlink MICC control panels or the C-4-RI panel for easy control from the chart table.

Standby mode reduces power consumption to idle (0.6W) when no load is detected. The load detection threshold for exiting standby is adjustable from 0 to 40W. If consumption is very low, the inverter enters standby. It automatically reactivates as soon as a device is powered on.

Absolutely. Unlike light-duty ranges, the Mass Sine series is specifically designed for intensive, continuous, and demanding operation, meeting the requirements of commercial and semi-commercial vessels.

The High Temperature indicator means the inverter is overheating. This typically occurs during prolonged use with heavy loads or if ventilation around the device is insufficient.

The converter accepts an absolute input voltage range from 0.0 to 35.0 V without damage, though it is optimized for a nominal voltage of 24V.

Yes, it is equipped with multiple safety features. In case of overload, the Overload LED lights up. If the overload persists, the inverter will enter safety shutdown to protect both the device and your electrical installation.