MasterBus kabelis 15 m

It serves as a connection to create or extend your onboard power network. It simultaneously ensures fast data communication transfer and electrical power supply to compatible peripheral equipment.

The MasterBus network operates in a daisy-chain configuration. You simply connect this cable from one device to the next; native equipment has two communication ports designed for this purpose.

No additional hub is required. Mastervolt devices compatible with MasterBus come standard with two ports allowing direct end-to-end daisy chaining.

Yes, but indirectly. For equipment from other brands or older non-native models, a dedicated MasterBus interface will be required to integrate them into the network via this communication cable.

No, this cable is specifically designed to handle both data communication and power supply for small peripheral devices (such as displays) on the network.

Yes, as with any MasterBus network, both ends of your device chain must be terminated with a MasterBus terminator to ensure communication stability and reliability.

While it is recommended to use the appropriate length (Mastervolt offers cables ranging from 0.2m to 100m), there is a DIY kit option to create or adjust custom cables.

Using a single 15-meter cable eliminates the need for multiple intermediate connectors. This significantly reduces the risk of signal loss or poor contacts on your network.

Yes. This cable allows you to connect MasterBus-compatible batteries to the rest of your system (chargers, inverters, displays) for precise energy monitoring onboard.

Yes, it is fully compatible with Mastervolt displays. It will transmit data from the network to the screen while powering it electrically, simplifying the wiring.

RoHS compliance (EN 63000:2018 standard) certifies that this cable is manufactured without the use of hazardous substances such as lead, mercury, or cadmium, ensuring an environmentally friendly and health-safe product.

Yes, its 15-metre length is well-suited for connecting distant components on a boat, such as the engine room and the helm or the chart table.

No, this cable is only a physical data and power transmission link. If your device requires a MasterBus interface to translate its protocol, the interface remains mandatory.

Yes, the 15-metre MasterBus cable is supplied ready-to-use with RJ45 connectors specific to the system pre-fitted at both ends for a Plug & Play installation.

Yes, most recent Mastervolt chargers, inverters, and combis come with native MasterBus ports and connect directly and easily with this cable.

Yes, in addition to the CE marking, this cable holds UKCA certification, confirming strict compliance with current UK legislation and standards.

If 15 meters are not enough, you can use an intermediate MasterBus device to extend the network, or choose a longer cable. Mastervolt offers lengths up to 100 meters.