Lielā modeļa klāja stiprinājums

The Raymarine T050 large deck bracket is designed for secure installation of instruments on a horizontal surface. It allows solid mounting of an instrument while providing flexibility for temporary or permanent installations, serving as a practical mounting solution within the Raymarine accessories range.

The T050 clamp is specifically designed to be mounted on a horizontal surface of your boat. It is important to choose an appropriate location to ensure the stability and accessibility of the instrument.

To secure the T050 bracket, four non-magnetic screws are required. The screw size must match your boat’s structure to ensure a secure fit without damaging components beneath the mounting surface.

Yes, it is crucial to apply a sealant between the base of the bracket and the mounting surface. This precaution is essential to prevent any water infiltration into the boat's structure after installation, thus ensuring the integrity of your deck.

Once the T050 deck bracket is permanently mounted, the instrument cradle bolts to the bracket. The instrument itself can then be inserted and removed from the cradle by simple clipping before each sailing session, providing ease of use and storage.

If the cleat is positioned in an area where ropes could snag on it, you can use the two integrated eyelets at the top of the cleat. These eyelets allow you to attach an elastic around the mast for additional securing, preventing snags and damage.

To avoid interference and ensure instrument accuracy, it is critical not to mount the T050 bracket within 0.6 meters (2 feet) of magnetic objects. This includes conventional compasses, which are themselves magnetic objects and could disrupt instrument performance.

For instruments with an integrated compass, accuracy is guaranteed only if the mounting bracket is installed with a maximum tilt of 20° relative to vertical. It is also critical to ensure there is no excessive port or starboard heel to maintain reliable navigation data.