Attālinātā atmiņas lasītājs RCR-1

The Raymarine RCR-1 remote card reader (A80585) is designed to extend the connectivity capabilities of Axiom multifunction displays. It enables flexible access to navigation data and software updates, which is particularly useful in installations where direct access to the display ports is limited.

The RCR-1 has a slot for an SD card. It is compatible with MicroSD memory cards, provided they are inserted into an SD adapter. Most MicroSD cards come with a suitable adapter.

Yes, the RCR-1 reader's USB port can be used to connect external USB storage devices, such as USB keys, and also provides a charging function for compatible USB devices. It is important not to connect a device requiring an external power source to the product's USB port.

The RCR-1 remote chartplotter reader operates on a 5VDC power supply.

The RCR-1 chartplotter is designed for marine use with IPX6 and IPX7 waterproof certification. This ensures resistance to water splashes and temporary immersion.

The RCR-1 card reader measures 55 mm by 55 mm. These dimensions correspond to the actual product size and do not include clearance data.

The RCR-1 is supplied with the following items:

The RCR-1 card reader itself.A 1-metre (3.28 ft) cable for connection to the multifunction display.Ferrite suppression beads to minimize electromagnetic interference.A sealing gasket to be fitted to the rear of the reader.Please note that mounting screws are not supplied and must be purchased separately.

While the product meets the IPX6 waterproofing standard, water ingress and equipment failure may occur if the product is subjected to commercial high-pressure washing. Raymarine does not guarantee products exposed to this type of washing.

The RCR-1 remote chartplotter weighs 0.2 kg.

The RCR-1 remote card reader is designed to be used with Raymarine Axiom multifunction displays (MFD).

The RCR-1 can be connected to a network of multiple Axiom multifunction displays. It connects via the accessory port located at the rear of your MFD.

The RCR-1 remote card reader is specifically designed and optimized for Raymarine Axiom multifunction displays. Compatibility with MFDs from other brands is not specified.

The RCR-1 is designed for surface mounting. Installation is performed using the supplied mounting template to drill the required holes, then securing the chartplotter with appropriate self-tapping screws (not supplied).

The RCR-1 card reader comes with a 1-metre (3.28 ft) connection cable for linking to the Axiom multifunction display.

Yes, four self-tapping screws of the appropriate size are required to mount the unit and are not supplied with the product. The drill bit and screw size will depend on the thickness and type of material the unit is mounted on.

Yes, a mounting template (part number 87292) is provided to help you cut and drill the relevant holes in the mounting surface for precise installation of the RCR-1.

To minimize electromagnetic interference, suppression ferrites are included and must be installed on the chartplotter’s cable. Two ferrites must be placed at 6 mm (0.24 in) intervals from the end of the cable connector, and the third at 53 mm (2.09 in) from the rear of the chartplotter. Cable ties are also provided to secure each ferrite in place.

Before starting the installation, ensure that the vessel's electrical power is turned off. Never connect or disconnect the equipment while power is active unless explicitly stated otherwise. It is also critical to ensure the product is properly grounded and that the power source is protected by a fuse or appropriately rated thermal circuit breaker. Do not connect this unit to a positive ground system.

For optimal EMC (Electromagnetic Compatibility) performance, it is recommended that the RCR-1 and its cables be:

At least 1 meter (3.3 feet) away from any equipment transmitting or cables carrying radio signals (e.g., VHF radios, cables, and antennas). For SSB radios, this distance must be increased to 2 meters (6.6 feet).More than 2 meters (6.6 feet) from the path of a radar beam.Powered by a separate battery from the one used for engine starting to avoid erratic behavior and data loss.

No, this product is NOT approved for use in hazardous or flammable atmospheres. It must NOT be installed in such an environment, such as an engine room or near fuel tanks.