Barošanas kabelis SeaTalk NG

The Raymarine A06049 cable is an essential component designed to supply power to the SeaTalkng network. It ensures the distribution of the necessary energy to all Raymarine instruments and sensors connected to the SeaTalkng backbone, thereby guaranteeing their proper operation and network stability.

The SeaTalkng power cable A06049 is easily identifiable by its red color band. This marking allows it to be distinguished from backbone cables (blue) and spur cables (white) within the SeaTalkng network, which are dedicated to data transmission.

The SeaTalkng network is typically powered by a 12-volt direct current source (12V DC). The A06049 cable is designed to connect to this power source and distribute the 12V DC to the network backbone.

The A06049 power cable is equipped with a standard 5-pin SeaTalkng connector on one end, which plugs directly into the network backbone. The other end typically consists of stripped wires for secure connection to the boat's power source.

Yes, cable A06049 is a proprietary Raymarine product, designed specifically for use with the brand’s SeaTalkng network systems. It ensures optimal integration and performance within this ecosystem.

Yes, like all Raymarine products intended for marine use, the A06049 cable is designed to withstand demanding marine conditions, including humidity, temperature variations, and vibrations. Its construction ensures long-term reliability on board.

The A06049 cable is a standard power cable. Its length is typically short, sufficient to connect the SeaTalkng backbone to a nearby power source. Specific lengths may vary depending on versions or kits, but the A06049 model is the base power cable.

No, the Raymarine A06049 cable itself does not include any fuse or built-in electrical protection. A suitable protection device (fuse or circuit breaker) must be installed on the power circuit before connecting the cable to the power source, in accordance with the SeaTalkng manual recommendations.

Cable A06049 is neither a backbone cable (blue) nor a spur cable (white). It is a dedicated power cable, identifiable by its red stripe, which connects to the SeaTalkng backbone to supply it with the necessary power.

The A06049 power cable must be connected directly to the main SeaTalkng backbone. The backbone acts as the system's backbone, distributing power and data to all connected instruments.

Yes, using power cable A06049 does not eliminate the need to install terminators. Two terminators are mandatory, one at each end of the SeaTalkng backbone cable, to ensure proper data transmission and stable network operation.

When installing A06049 cable, it is crucial to consider:

The total load of products connected to the SeaTalkng network.The available power source (typically 12V DC).Installing adequate electrical protection (fuse or circuit breaker) on the power circuit.The positioning of the power connection point to ensure a balanced system if the network is extended.These precautions are detailed in the SeaTalkng reference manual.

It is strongly discouraged to cut or extend the part of the A06049 cable that includes the SeaTalkng connector, as this could compromise signal and power integrity. The section of bare wires intended for connection to the power source can be adjusted with caution if necessary, while complying with electrical standards and ensuring a secure connection.

Yes, for electrical safety reasons, it is imperative to ensure that the boat's main power supply is turned off before starting the installation of cable A06049 or any other connection to the SeaTalkng network. This prevents any risk of electric shock or damage to the equipment.

The A06049 power cable is designed specifically for Raymarine's SeaTalkng network. While SeaTalkng is compatible with NMEA 2000 via specific adapter cables for data transmission, the A06049 cable itself does not connect directly to an NMEA 2000 network for power. It powers the SeaTalkng backbone, which can then exchange data with NMEA 2000.

Cable A06049 is designed to power the SeaTalkng network. To connect and potentially power SeaTalk(1) products via a SeaTalkng network, you must use Raymarine gateway products (such as certain ST70 instruments) and specific adapter cables. Cable A06049 does not provide direct power to SeaTalk(1) devices.

Yes, power cable A06049 is a standard component of the SeaTalkng system and is compatible with all Raymarine instruments designed to connect to a SeaTalkng network. It supplies power to the backbone, allowing all connected devices to operate.

No, cable A06049 is a proprietary component of the Raymarine SeaTalkng system. It is designed specifically for integration with this network architecture and is not directly compatible with products or networks from other brands, even if they use similar protocols like NMEA 2000.